Take the 2-minute tour ×
Bicycles Stack Exchange is a question and answer site for people who build and repair bicycles, people who train cycling, or commute on bicycles. It's 100% free, no registration required.

I have a surly karate monkey set up as a single speed. The frame has rear facing horizontal dropouts (track style).

I don't like quick releases due to potential theft when locking up my bike.

Are standard Allen key skewers or security skewers (like hublox or pitlock) going to hold my rear wheel tight enough to avoid sliding forward in the dropouts? If not, would zefal locking skewers be appropriate?

share|improve this question

3 Answers 3

up vote 3 down vote accepted

There is no issue with using a Q/R or fixed end anti theft skewer on a horizontal dropout. They are well above the threshold of strength required to fix your wheel in the dropouts.

share|improve this answer

in my experience bolt on rear wheels with horizontal drop outs / single speeds actually perform better.

share|improve this answer

It depends on how aggressive you ride. If you are a casual rider and rarely do many jumps or drops then they should work just fine. I am a pretty aggressive rider and have snapped more than my fair share of skewers trying to keep the wheel in place. I have also snapped a number of hollow axles because they are just not strong enough for the riding I do. So I switched to solid axles which are stronger (ultimately cheaper too). I have never had a problem with theft since I lock my both wheels with the frame.

If solid axles are not what you are looking for, I like the pitlock (that doesnt have the hex outer body), they can both be removed by a determined thief with a pipe-wrench, but the inactive side is smaller and harder to grip. Either one will hold the wheel in place about the same though.

share|improve this answer
    
Also besides the jumps/drops (which might not be a big issue if the dropouts are horizontal, not sure about it), there is the 'skidding' factor, although skidding actually creates a force pulling the axle to the front of the bicycle. Those threaded axle positioners might help, I think. –  heltonbiker May 9 '12 at 0:44
    
Like #heltonbiker says, use a chain tug for positioning and the QR axle to hold the wheel. I do that on my hub geared bikes and it works fine. There are a few questions on this site talking about chain tugs. –  Kohi May 14 '12 at 22:14

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.