Take the 2-minute tour ×
Bicycles Stack Exchange is a question and answer site for people who build and repair bicycles, people who train cycling, or commute on bicycles. It's 100% free, no registration required.

I want to replace the non-Shimano rear brake that came with my bike with either Shimano 105 (BR-5700) or Tiagra (BR-4600) brakes, preferably the 105 model. The Shimano compatiblity chart says the 10 speed Tiagra (ST-4600) levers are compatible but the bike has the older Tiagra ST-4500 levers.

Will the ST-4500 levers be able to work well with these newer brakes or do I have to trudge off to eBay and try to find older Shimano 105s?

share|improve this question

1 Answer 1

As long as you use a Shimano brake caliper designed for a road STI lever, which is any Tiagra, 105, Ultegra, or Dura-Ace, they will work not just well, but perfectly. There may be a performance difference, but there will not be a compatibility difference.

Even most 3rd party brake calipers will work just fine.

share|improve this answer
Thanks! Yes, the ST-4500 levers are STI according to the Shimano specs. I'm hoping to get BR-5700 brake by this weekend to try them out. I'll document any issue in another answer to this question but if all goes well, I'll add another 25 points to your impressive score. –  Sixto Saez Jun 12 '12 at 15:03
I appreciate the thought. I have no doubt though. I've been a professional mechanic for 18 years, and I've done the same type of parts upgrade many, many times. STI, btw, is a Shimano acronym which includes any brake lever shifter combination they make. In this case, any Road STI lever will work. That is not true if you are changing derailleurs, but for brake calipers, it is. –  zenbike Jun 12 '12 at 15:58

Your Answer


By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.