2
votes
0answers
18 views

Reoccurring Bent Axles, any reasons or upgrades?

Earlier this month I had a issue with a broken axle. It was the original that was sold with the bike and lasted around 5,000 miles. I went to my LBS and bought a new axle (unbranded, labeled, etc, ...
0
votes
1answer
50 views

Why front hub axle sticks/freezes when riding extreme downhill

My front hub axle has already frozen when riding extreme downhill. Looking at the hub, it looks like the right hand cone has self-tightened. Can you explain why this happens, and how to fix it?
1
vote
2answers
85 views

Adjusting over locknut distance with spacers

I'm trying to adapt a 130mm over locknut distance (OLD) hub to a 135mm OLD frame. Sheldon Brown suggests that I can just add in spacers between the cones and the locknuts. Sheldon doesn't say, ...
1
vote
1answer
157 views

Adaptor for 20mm Shimano saint 810 hub to 15mm?

Currently I'm running a Shimano Saint 810 front hub and fork Lyrik coil 20mm. I've a good offer on a brand new Manitou Mattoc 2014. But this fork uses 15mm axle. I'm looking for an adapter to be able ...
3
votes
1answer
453 views

Lock nuts on new hubs seem strangely tight, but can't seem to loosen them. Any advice?

As part of a new build I'm working on, I just had some wheels built up. The hubs are large flanged Miche Primatos with a double-sided fixed wheel. The rear wheel, straight out the box, seemed weirdly ...
2
votes
2answers
1k views

What's wrong with my rear wheel? Wheel moves about 1/4" front to back when brake is fully applied, cassette seems a bit wobbly, some rubbing noise

I first started inspecting my wheel because I noticed when I applied my brake while not riding, I could push my rear end and the wheel would turn forward and back about 1/4"-1/2" each way (but the ...
1
vote
1answer
97 views

Bicycle rear hub sounding weird

My rear axle broke about 2 weeks ago, and I replaced it with a new one. I also replaced the ball bearings with new ones when I did this. The issue I am having is when I'm going with a higher speed ...
4
votes
1answer
732 views

Mountain bike axle diameters

Out of interest I would like to understand the benefits of having a 15mm or 20mm through axle over a 9mm QR (and a 10mm vs. a 12mm TA on the rear). What difference does it make to the ride?
1
vote
2answers
479 views

How do I take apart the axle and freehub on this bike

I have a long wheelbase recumbent built by Sun Bicycles. There are some complications with finding out what kinds of components went into the interior of the bike. Brakes and shifters have their ...
1
vote
2answers
398 views

Singlespeed Hub - Rear Axle Swap

I have two sets of wheels, both laced to surly singlespeed hubs (the older "new" hubs, not the "ultra new" hubs which seem to make this process much easier). Anyway the wheelset I like better has a ...
2
votes
1answer
385 views

Suspension Fork Axles

I'm looking to upgrade my suspension forks from Rock Shox Dart 3 to something like Rock Shox Sektor RL. A lot of the forks have either a 15 or 20 mm axle, or 'Maxle'. What does this mean? Will this ...
0
votes
2answers
231 views

i have an se dirt jumper with 4 sealed bearings in the rear hub, can i convert it from QR to solid axle?

i dont want the quick release for single speed, i want to ditch the skewer for a solid axle to torque it down good for single speed... my LBS mechanic said they couldnt do it but with sealed bearings ...