0
votes
1answer
123 views

Soft “Thunk” in the crank

I have a one month old Citizen foldable bike and I have noticed a soft "thunk" when turning the crank. It sounds the same whatever gear I am in. It also seems to go away for a short while if I stop ...
0
votes
1answer
285 views

Can't get the drive side bottom bracket cup out

I have an older Raleigh frame that I converted to a fixed gear and the bottom bracket cup on the drive side has been painted over a few times and I can't get it out. This is the type of cup (the one ...
4
votes
2answers
495 views

Why does the chain tension vary as pedals are turned?

I have a new single-speed bike (after purchase this year, it was unused in a garage for a few months), but as I turn the pedals, the tension in the chain varies noticeably. What should I check, ...
5
votes
2answers
928 views

How should I prepare a carbon frame when I want to swap in a new bottom bracket?

My four-year-old, carbon-framed road bike has developed a case of creaky cranks. I only hear creaking when pedalling hard, when I pedal more softly it just sounds like it has always done. Given the ...
3
votes
2answers
617 views

How can I remove the bottom bracket from this old road bike?

I need some help removing this bottom bracket. I am obviously no mechanic, and watching several videos on youtube I found nothing that could help in this specific case. Basically after removing both ...
2
votes
2answers
753 views

Identifying bottom bracket

First and foremost.. I'm slowly trying to replace my bottom bracket.. it makes a kind of knackered-bearings sound when I move the pedals round without the chain attached. This is because I've been bad ...
5
votes
2answers
1k views

Swapping cranks, but the new crank is wider, how do I compensate for this?

I was swapping the cranks and bottom bracket on my karate monkey from a Truvative stylo crankset (Mountain Double, GXP bottom bracket) to a Race Face Evolution DH (Mountain Triple, Race Face bottom ...
2
votes
2answers
694 views

Bottom bracket bearing Issues

Been having some bottom bracket (BB) woes. Noticed a click on the top of the left pedal stroke decided to re-grease the BB. Took it apart cleaned everything re-greased, put it back together. Roll ...
1
vote
3answers
2k views

Bottom bracket is ticking

Recently my 2008 Devinci mountain bike sounds like it's ticking when I push down on my left pedal on a usual rotation. When I turn the bike over and go through rotations, I can't get it to tick. ...
9
votes
3answers
6k views

Annoying clicking sound from the bottom bracket

I just purchased a Fuji ACR 2.0 road bike from a guy who bought it three months back but didn't ride it at all. I brought it home and found that it is making a clicking sound when I pedal. The sound ...
1
vote
2answers
369 views

how to replace a bearing on BB7800?

Friends, Do anyone of you know on how to replace a bearing on BB7800 ? Do I need a special tool ? or a screw driver, and hammer would be enough to push it out ? Thanks
1
vote
2answers
2k views

Will a hollowtech shimano BB fit a bike which currently has an octalink bracket?

I have a mongoose otero elite 2008 and the crankset is broke (wobbling) It's also bent, so time for a new one. I currently have a nice shimano deore crankset from an old bike, but it uses a different ...
5
votes
2answers
18k views

How do I measure a bottom bracket?

I need to replace the bottom bracket bearing on my fixie. I plan to get a Shimano UN26, but I note that there are a number of different sizes. The sizes seem to be expressed as 68-110, where 68 is the ...
3
votes
1answer
633 views

Bottom bracket square taper (cartridge) extraction, too tight in one side

I'm getting weird noises coming from the bottom bracket (BB from now on), and I wanted to extract it to check if the problem is there or not. The guide video I used is no longer public (free) as when ...
3
votes
4answers
4k views

Bottom bracket making noise, should it be fixed now or can I wait until regular maintenance?

My bike has been ridden 4 months / 2000 miles and is no longer completely quiet. About a month ago I noticed a whispering noise like a wire brush sliding across a cymbal. It happens on the ...
3
votes
1answer
929 views

Are Shimano Hollowtech II bottom bracket spacers unique?

I'm moving my Shimano Hollowtech II XT crankset and bottom bracket over from a bike with 73mm bottom bracket to a 68mm bike. The only problem is that I only have 1 spacer and now I need 3 bottom ...
3
votes
1answer
2k views

How hard is it to disassemble and reassemble a bottom bracket?

I ride an SE Lager. It's a pretty cheap and crappy bike. I've had to replace pretty much everything on it due to wear/breakage. The only area I haven't tackled is the bottom bracket. I can ...
10
votes
2answers
8k views

What are the benefits of external bottom brackets?

Pretty soon, I plan to replace the bottom bracket on my early 90's Sakae Litage road bike. It takes a standard, English-threaded bottom bracket. Right now I think it contains loose bearings--I was ...
10
votes
7answers
15k views

How to remove a crank arm with stripped threads?

A friend called me up yesterday after a mis-adventure during his attempt at a bottom bracket overhaul. He stripped out the threads on the (left) crank arm while using a Park crank puller. In a pinch, ...
5
votes
2answers
5k views

Does my bottom bracket need replacing?

About two months ago I bought a Boardman HT Comp. Today I took it into my local bike shop for a service. While I was in the shop one of the technicians had a quick look at it and told me that my ...
12
votes
3answers
8k views

How do I know when to replace my bottom bracket?

With out completely removing the cranks and bottom bracket, how can I tell when it's time to replace my bottom bracket? The current symptom is a slightly 'rough' feeling when I pedal. It's not ...
7
votes
3answers
2k views

How do I stop my EBB (Eccentric Bottom Bracket) from creaking?

I have a '09 Felt Niner 29" SS with an EBB. After a thorough clean and reassembly of the BB the creaking will subside for a ride or so and then come back. Any suggestions? EDIT: the problem appears ...
13
votes
6answers
18k views

How often should I grease and repack my hubs and bottom bracket?

I am commuting 7 miles a day (round trip) in all weather in New England (temperate, moderately wet climate, cold winters). Overall I am putting about 1000 miles per year on my commuter bike, a 2009 ...