4
votes
0answers
95 views

Fixing hydraulic disk brakes, what to check first?

I have a 10-year old bike, fitted with hydraulic disk brakes. The bike has been actively used for around 4 years only though. Recently, my brake levers started to have more and more "play" before the ...
5
votes
3answers
310 views

What happens when a bike has not had maintenance for a long time?

I recently traded my Kent BMX bike I got from Wal-Mart: for a Ross road bike ). My friend tells me the bike sat in his back yard collecting rust, I see it has rust on the chain, the gears, brake ...
0
votes
1answer
259 views

Rear V-brake pivots (cantilever studs) asymmetrical on Specialized Hardrock XC 2004 - how to fix?

This is a bit weird question. I bought a Specialized Hardrock XC used bike cheaply on e-bay. It had no front brake and the rear v-brake had different arms and was very dodgy. I thought I would able to ...
1
vote
1answer
239 views

When do my brake pads need replacement?

I have a bike that is almost two years old. It still has the original brakes (side pull caliper brakes), which seem to still be functional. However, they are worn and I am going to be doing a lot of ...
2
votes
2answers
559 views

Brake pads constantly touching the rotor because piston is not moving back

I recently replaced the brake pads on my hydraulic disc brake. The brakes are a Tektro Draco 2. Now the new pads are constantly touching the rotor. This is how it looks like with caliper ...
1
vote
1answer
182 views

When to tune/replace brake cables for optimum tension

Original Question What physical symptoms do I need to look for to understand that my brake is out of tuning or the cables have reached end of life? It is not necessary to consider the brake shoes in ...
6
votes
4answers
247 views

Concerns with different brake types for the front and the rear wheel

I'm considering adding a disc fork to my surly cross check and using some avid bb7 road brakes for the front. I've got tektro road levers on drop bars (outfitted with retroshift shifters) I've got ...
2
votes
2answers
121 views

Jammed rear brakes

My rear brake is jamming to the point that only half seems to be moving. With worn blocks I got away with it, but now I have changed the pads I finally need to sort the problem. Could the brakes be ...
2
votes
2answers
159 views

How to fit tt brakes

got a set of profile design bull horns and fitting an aero lever/tt brake. name this one how is this inserted into the handlebar and how does one adjust? Cheers
0
votes
2answers
1k views

My v-brake lever (just one) is stiff. What's wrong?

After tuning my brakes a lot (I was learning how) I noticed suddenly my back brake got really stiff. Does't really matter if the cable is loose or not, the lever itself feels really hard to pull when ...
5
votes
1answer
216 views

There is a lip on my brake pad from bad positioning. Can I remove the lip?

One of my bikes had the brake pads positioned poorly and they developed a pretty pronounced lip where the pad hung off machined braking surface on one side. The bike is using cantilever brakes. These ...
2
votes
1answer
8k views

How to adjust Avid Elixir 1 hydraulic disc brakes?

I have a Trek X-Caliber and the rear disc is rubbing a little. So I want to adjust the brakes so it doesn't rub and make things a bit easier of course. I see many videos about brake adjustment but ...
3
votes
2answers
277 views

Stop my front brake lever screws from vibrating out?

One of the most common maintenance tasks on my Mongoose Tyax Super is to tighten a small screw in my front brake level. It shakes loose both due to use, and from a habit I picked up riding in ...
1
vote
2answers
696 views

The quick release on my shimano sora brakes pops open during braking

Occasionally, when using my bike with shimano sora brakes on the front and rear, the quick release will pop open during braking, reducing my braking power. Is there some way to prevent this? Is it ...
3
votes
3answers
779 views

What rear brake should I get for a Surly Steamroller?

I recently acquired a Surly Steamroller (fixed gear bike). I want to ride is as a single speed for everyday use. I changed out the rear wheel and got one with a flip-flop hub. I'd also like to add a ...
6
votes
5answers
1k views

Do brake cables become more elastic with time?

I bought a used bike a few months ago, and I've noticed a drastic reduction in brake power. At first, I was easily able to lock-up the rear wheel while squeezing the brake lever only half-way to the ...
5
votes
2answers
2k views

Brake callipers not long enough to allow adjustment of pads

I upgraded the standard Tektro brakes on my SE Lager to Shimano 105s. The braking performance is vastly improved. I also have Charge Plug wheels, rather than the stock wheels. However I've noticed ...
9
votes
2answers
2k views

My brake lever is coming loose from my handle bars; how can I tighten it?

I have a road bike with drop bars, and the left brake lever is slightly loose - it can rotate a few degrees around the handle bar from side to side. How can I tighten it? Is it possible to do so ...
8
votes
3answers
4k views

Fixing noisy V brakes

My V brakes make a lot of noise when I brake!! I am annoyed by such noise not to mention the pedestrians. My Mechanic said that it will not make those noise after using for couple of days, but it is ...
12
votes
4answers
2k views

What kinds of brake designs exist, and what are their general pros and cons?

Here are the ones I'm aware of: Center Pull Cantilever Slightly better braking than side pull brakes. No recentering problem. Relatively rare V-Brakes Cheap to produce. Similar in braking power ...
22
votes
6answers
2k views

Why do the front and rear brakes work independently?

Why do bicycles have two individual brake levers that work independently to brake each wheel? I've always used my right brake lever because it is more comfortable to do so and I haven't noticed any ...
4
votes
1answer
5k views

How do I stop my brake from sticking?

The rear brake (calliper) on my road bike sticks. When I pull the brake it pulls down but only half springs back and there's then slack in the leavers. This is causing rubbing on the rim. It's a ...
5
votes
2answers
852 views

Where can I get a basic toolkit for bicycle - Walmart etc?

I want some basic things in toolkit (like oiling of chain, tightening of brakes etc). Where can I find them and how much does it usually cost? I want to buy one, so can you name the basic tools with ...
6
votes
1answer
9k views

How do I bleed Avid Elixir brakes

My bike has a set of Avid Elixir R hydraulic brakes. The front brake barely goes on when I pull the lever and the back brake feels pretty soft. I think I need to bleed them. How do I go about doing ...
8
votes
1answer
523 views

How do I change my disc brake pads?

How do I change my disc-brake pads? How do I avoid letting the fluid out?
10
votes
2answers
820 views

When to change disk brake pads

I was wondering how to tell when your disk brake pads need replacing. My front seems to be not stopping as quickly as it used to, or as I would like. I know this could be road grime build up, but I ...
9
votes
2answers
6k views

Hydraulic Disc Brakes Maintenance

I have Hayes Nine hydraulic disc brakes on my mountain bike. I have recently replaced the brake pads and after that it seems that the pads are almost touching the rotor. How can I adjust it? I have ...