5
votes
2answers
130 views

Bicycle disc brake rotors

It is time to change my bike's hydraulic disc brakes . Now I have a Hayes Stroker Ryde system , but I want to order a Shimano M395 instead . The question is that I don't know If I have to order the ...
0
votes
1answer
81 views

Combination of different Shimano braking components

For a daily city bike i want to combine some older Shimano Components. Is it possible to combine a Shimano XT V-Brake Lever (BL-M739) with a Shimano 105 SLR Front brake or are there any things i have ...
2
votes
2answers
551 views

Beside drive train, what is the difference between group components (e.g. 105 vs. Ultegra)?

In his previous post, jmusits asked the difference between the Shimano 105 and Ultegra drive train. Obviously, the derailleur is certainly one of the major components of a group. However levers, ...
4
votes
2answers
315 views

CB Roubaix upgrade to Shimano Tiagra - brake problems

I installed the new Tiagra brakes (4600) to my Claud Butler bike following the accompanying instructions. I've also installed new Tiagra levers. There is not enough adjustment in the brakes to allow ...
3
votes
2answers
281 views

Can i use v brakes on racing bike rims?

i fitted a set of cheap "thin" (racing bike size) rims with 32 mm tyres. the fork allows even bigger tyres to be mounted. is it a problem if i fit the bike with Deore LX v-brakes ? will it brake ...
4
votes
1answer
2k views

Replace Ultegra 6600 STI lever

I need to replace my Ultegra 6600 right hand shifter as the ratcheting system is gone. The rest of the groupset is all the same 6600 series. I am having a hard time sourcing just a right hand side ...
1
vote
1answer
237 views

Are faceplates for different shimano brifters compatible?

I got a used brifter and the faceplate fell off. I am pretty sure it was a 105. It works well enough but it looks shitty. Does anyone know if I can just order whichever shimano brifter faceplate, and ...
0
votes
2answers
1k views

Adjust reach on Ultegra ST-6510 levers?

I'd like to adjust the reach (distance from the drop bars to the brake levers) on my Ultegra 6510 levers. The Shimano instructions don't mention the ability to adjust this at all, which seems odd to ...
6
votes
2answers
2k views

Adjusting the pull/reach of STI levers with top-brakes (Tricross)

Please excuse my terminology, I have a Specialized Tricross (2008) with Shimano Tiagra STI levers, and convenience brakes on the top of the bars, running through the same cable. Naturally, adjusting ...