0
votes
1answer
98 views

What's the best way to quickly align front quick release wheel?

The front wheel on my bike is quick-release, and I often remove it when locking up my bike. Then when I go to put it back on, sometimes it is a bit difficult to make sure that the wheel is centered ...
1
vote
2answers
113 views

What will I need to consider when modernizing a pre-1990s steel frame? [closed]

I'm in the process of upgrading a well loved 1970s steel frame from a downtube shifter system to a modern 'brifter' system. Through this process I've had to look at many disparate sources to get ...
2
votes
1answer
138 views

When turning a corner my rear wheel touches the brake pad, is this normal?

I replaced my brake pads about a week ago and today I noticed that, when turning (or generally under lateral force), the rim touches one of the brake pads (depending on which way I'm turning. I ...
0
votes
0answers
81 views

Extra screw after removing front wheel (plus enclosed hub brakes)

My partners bike, a Pashley Princess Sovereign, had a flat front tyre, and whilst I was out a friend came to have a look. He removed the front wheel (detaching the brake, a fully enclosed brake hub), ...
1
vote
2answers
291 views

How to build a fixie bike? [closed]

I’m thinking about building a fixie and was wondering what are the best types of frame, wheels etc to use and how long the whole building process may take?
4
votes
1answer
754 views

Does having machined brake surface on rims matter?

I'm looking at getting a wheelset with disc hubs and rim brakes to run on my disc and non-disc cross bikes. There are stock wheels that have velocity a23 rims, which are a poupular rim brake ...
0
votes
1answer
504 views

Brakes contacting wheel after reattaching

I removed the rear wheel (quick release) from my Trek bike to install a bike trailer hitch. After replacing the wheel, the brake pads are rubbing. I did over-tighten the wheel when I first put it ...
2
votes
2answers
2k views

Rear wheel not centred, presses against one of the brake pads (Rohloff hub, Magura rim brakes)

Upon replacing my rear brake pads, I noticed that my rear wheel is not properly centered. The consequence is that the wheel is pressed against one of the brake pads, as can be seen in the pictures ...
5
votes
6answers
4k views

Front wheel “shudder” or “pulse” when braking

When I apply the front brake I can feel a "shudder" or "pulse" through the front wheel, fork and handlebars. It's faster when I'm travelling faster and slower when I'm moving slower. I assume there's ...
8
votes
5answers
1k views

Weight of disc brakes

People say (for example here) that disc brakes are relatively heavy, giving this as a reason for not using them. How much heavier than rim brakes are disc brakes? Is the extra heaviness in the ...