Disc/rim/drum/coaster brakes; braking technique, maintaining brakes, anything else about stopping a bike.

learn more… | top users | synonyms (2)

3
votes
1answer
138 views

MTB levers on a road bike conversion

I've got a Raleigh Olympian road bike I use for commutes and my neck is killing me (congenital problem). So I want to put gull wing cruiser bars on this bike, with mountain bike levers in the center ...
1
vote
2answers
108 views

connecting center pull dia-compe lever cables

I have some old dia-compe center pull brakes. Inside the lever is the little roller pin with a slot in it for the cable and the small hole on the bottom and the larger hole on the top that the nut ...
9
votes
3answers
4k views

Disk brake squealing after bike shop changed my pads. Is it enough reason to ask them to re-service (for free)?

I recently took my bike to the shop, since it started making a weird metal on metal (not squeal, just hard brushing sound). After checking it out they saw that the back brake pads were really (REALLY) ...
1
vote
4answers
2k views

Adjust reach on Ultegra ST-6510 levers?

I'd like to adjust the reach (distance from the drop bars to the brake levers) on my Ultegra 6510 levers. The Shimano instructions don't mention the ability to adjust this at all, which seems odd to ...
10
votes
11answers
43k views

What is safer…coaster brakes, regular brakes, or fixed gear braking?

I currently have a 'regular' bike, i.e. a bike with typical brakes but I've been more fascinated recently with single speed and fixed gear bikes. One of the reasons that I've held off on getting on is ...
9
votes
1answer
7k views

Disabling back-pedal brake

I have a bike with the so-called back-pedal brake, but since it's for someone who's learning I think that it's more an obstacle than an advantage. Since the bike also has hand-actioned brakes, can I ...
4
votes
1answer
177 views

Mystery item broken on old Dawes. Help!

I was adjusting rear brakes last night and this little thing snapped in half (see image [right]). The linear indent holds my brake cable in place and a 5mm bolt holds this in place. I guess I need to ...
5
votes
10answers
3k views

Why are brake lights not common?

I spent a fair bit of time riding in the lane, in traffic. In this situation, it seems that a brake light would be very useful: It's not always obvious when the vehicle ahead of you is slowing down, ...
5
votes
3answers
1k views

Is there a good way to clean brake hoods?

I just picked up an old bike with white brake hoods. They are pretty gnarsty, covered in a greyish brown layer of filth. I've tried a soapy rag and scrubber brush with elbow grease. It takes care of ...
6
votes
1answer
348 views

Mixed pair of sintered and organic brake pads for disk brakes

I am researching for a new road bike for myself, trying to identify the must-haves from the nice-to-have features. Disk/Disc brakes are on the must-have list, but the descriptions of brake pads are ...
-3
votes
4answers
255 views

How can I reset hydraulic brake pistons without removing the wheel?

I have Shimano M785 hydraulic disc brakes. It is easy to remove the pads and put them back in again even with the disc in place. However, resetting the brake pistons is tricky. I currently use a ...
2
votes
2answers
143 views

When I pull my disc brake handle the mechanical caliper will grab then release

My rear disc brakes will grab a little then release all together. I had tightened by cable at the brake handle so I loosened it but it still does the same. It is a Trek mechanical disc brake.
3
votes
1answer
331 views

Brake lever and shifter for bullhorn

I have a Sora 3500 set on my bike except for the shifters, which are Alivio ST-M310 and a 22.2mm flat bar. Now I have a new bullhorn which I would like to install, but the old shifters don't fit, ...
5
votes
3answers
250 views

High-end components [closed]

I'm wondering if anyone knows of any high-end components that are like Paul components. Not the pro-peloton stuff like SRAM and Shimano, but the, dare I say hipster components. I'm looking for ...
4
votes
2answers
694 views

How to remove play in cantilever pivot point?

I have been working my way through issues with noisy front cantilever brakes. After running through many different ways to solve the issue including new pads (Kool Stop Dura2 Duel Compound), setting ...
5
votes
1answer
149 views

How to prevent loose brake cables with a single pivot side-pull mechanism?

I recently bought a second hand bike and am now tweaking it to my liking. The bike has single pivot side-pull brakes, but it has a straight steering bar with regular brake levers (very similar, if not ...
3
votes
1answer
129 views

New Brake Compatibility with Vintage Bike

I have a vintage Gitane Sprint from the early '80s which came with Weinmann 405s (single-pivot side pulls). I had been thinking about replacing the front brake anyway and then recently broke the quick ...
4
votes
2answers
161 views

Coaster brake suddenly not working (Nexus 3-speed hub)

My girlfriend took her bike out for a spin and noticed the coaster brake wasn't working at all. Instead of braking it just back pedals, not like a free hub, but if you back pedal the bike actually ...
3
votes
1answer
329 views

Can we turn a fixie bike into a freewheeler?

I'm new to the fixie world. I'm planning to buy a fixie bike though, but to start right away would be difficult especially when I'm pedaling down hill. Is it possible to change the fixie bike into the ...
3
votes
4answers
1k views

Single pivot brake with handlebar levers (Resurrecting an old Colnago)

I have an old Colnago I want to resurrect, which after some Google-ing I have discovered is very similar to the bike here (but in blue): I want to replace the drop bar brakes with "standard" brakes ...
1
vote
1answer
252 views

Putting Shimano SORA STI Shifters on Touring Bike w/Deore Derailure

So I just bought the 2015 Fuji Touring Bike and it came with bar-end shifters. I do a lot of city riding so having STI "Brifters" is really convenient in hilly city traffic. The problem is my Fuji ...
10
votes
3answers
375 views

What is the purpose of the little wings on caliper brake pads

I noticed that caliper brake pads (holders) have little wings on the bottom that aren't present on v-brake pads. What is the purpose of these little wings? Photo by RoboKaren. Released to Creative ...
1
vote
0answers
125 views

General History of the V-Brakes/Direct Pull Brakes/Linear Pull Brakes [closed]

I am currently doing some research on the Direct Pull/ Linear Pull/ V brakes. I have so far found a lot of information on how to adjust and fix v brakes (i.e. Sheldon Brown) or even comparing the v ...
2
votes
4answers
163 views

Are braking vibrations a sign of the end of the life of a wheel?

My mountain commuter (2008 Schwinn High Timber) has picked up a vibration in the front wheel under braking. I'm worried that this is a sign that the rim is end of life. I checked the V-brakes and ...
23
votes
12answers
5k views

What type of brakes is least subject to failure in the winter?

There is a lot of snow in the winter where I live. Different kinds of snow; soft, sticky, wet, etc. And ice too. It can get pretty cold: -25 °C (-15 °F). We drop salt, sand and gravel on our roads. ...
2
votes
1answer
240 views

Correct position of brake quick release on Ultegra 6800

I'd like to know wether the brake quick release lever on the Ultegra 6800 can be kept in any intermediate position between completely closed and completely opened when riding.
10
votes
7answers
2k views

How many fingers on the brake lever?

I have seen people stop with one finger, two fingers or the whole hands on the levers. Is there a recommended number of fingers on the brake levers when stopping/anticipating an emergency stop? Do ...
8
votes
7answers
10k views

Is there a reason for brakes to be reversed in bikes with Hydraulic Brakes?

I recently bought a MTB with Hydraulic Disk Brakes, and am finding really hard to adjust with the braking system. From the very beginning I was cycling with Front brakes on right hand. But now its ...
1
vote
1answer
70 views

Avid Shorty 4 Carbon Brake Pads

I have Avid Shorty 4 brakes on a cross bike. I would like to use zipp 303 carbon wheels, but I am not sure about brake pads. The brake pads on there now are a combined cartridge and pad set. You ...
1
vote
2answers
272 views

Retrofit lockout for a suspension fork?

I am new for cycling. I am searching for bikes on which I will ride mostly on roads, but also on terrains/mountains occasionally. After doing a few researches online, I finally decided to buy a hybrid ...
2
votes
4answers
1k views

How much maximum force can be applied by fingers on the brake lever?

I am trying to calculate maximum force various braking systems can apply and for that I need the ergonomic data as to how much force fingers can apply.
2
votes
2answers
270 views

Shifters/brakes won't fit on bullhorn bars

I have a KALLOY UNO HB-005 580 mm handlebar and a shifter with brake combination, Shimano Alivio ST-M310. I have a Sora derailleur and crank set. I got as a gift a bullhorn Origin8 Bully Bullhorn ...
3
votes
3answers
802 views

changing disc brake pad material while keeping same rotors

I would like to know what effect changing the material of a set of disc brake pads would have on the rotors if you kept them the same. for example, If I have resin pads and have been using them for ...
26
votes
6answers
3k views

Why do the front and rear brakes work independently?

Why do bicycles have two individual brake levers that work independently to brake each wheel? I've always used my right brake lever because it is more comfortable to do so and I haven't noticed any ...
1
vote
2answers
5k views

Tips for adjusting Shimano M355 hydraulic brakes

I have upgraded from cheap old front cable disks brakes and rear v-brakes to Shimano hydraulic M355's front and rear. I always adjusted my old brakes for a very tight fit (to reduce dead space between ...
12
votes
7answers
48k views

Direct Pull (V-Brake) vs. Center Pull Cantilevers (pros and cons)

I am looking around for an old mountain bike to ride this winter (and this summer when it is wet). I was just browsing around and was curious what the difference was between Direct pull brakes: ...
1
vote
1answer
49 views

Do I need a special rack for my Schwinn Ascension hybrid bike with disk brakes?

Do I need a special rear rack for my Schwinn Ascension Hybrid bike that has disc brakes? Or will the regular Schwinn bike rack work
6
votes
2answers
673 views

Where to get the short wire of the cantilever brake?

I was riding my bike and rear brake fell apart. As a result I lost the short wire of the cantilever brake, or at least that what it seems to be called. Where can I buy that short cable please ? Here ...
3
votes
3answers
445 views

Would Putting BMX Bike Brakes on my Road Bike be Ok?

I am a bit of a bigger guy (260lbs) and I'm not too confident with riding my bike at higher speeds just yet. Mainly because I feel as though my brakes, (Stock V brakes that came with my Specialized ...
0
votes
1answer
117 views

Apollo XC26 mountain bike, convert it to a coaster brake fixie?

Hi a few years ago I acquired this bike: It's a pretty crappy bike, it's cheap, poor quality parts and not really a mountain bike... but that is why i love it. It means i have to pay extra ...
1
vote
1answer
171 views

Cane Creek Drop V cable compatibility

Are Cane Creek Drop V levers compatible with road brake cables or MTB brake cables? Specifically, road cables and MTB cables have different nipples that sit in the brake lever, and I need to know ...
12
votes
7answers
29k views

brake lever will not return

My friend has a mountain bike that survived last years Queensland's floods (Australia, that is), but is all battered and bruised after not being ridden for a year. With my beginner's repair skills, I ...
0
votes
2answers
303 views

What size is the tiny ball bearing used in SRAM brake caliper quick release detents?

SRAM road brake calipers (mine are specifically Rival from 2011) have a quick release lever to facilitate wheel changes, as many calipers do. The SRAM QR lever has detents which make a little "click ...
4
votes
3answers
3k views

Why does my back wheel keep becoming untrue?

So I broke a spoke a week ago, and when I put a new spoke in you know I trued it. Now, a week later, the bike feels like a kayak, because the back wheel is not very straight. Any idea why this would ...
0
votes
2answers
76 views

Is my fork disc compatible?

Hello I'd like to show you my fork, is it compatible with shimano m355 non series hydraulic brakes?
1
vote
3answers
83 views

Safe to shorten a dual-pivot caliper mounting nut?

I have a 2006 Specialized Langster. Unfortunately the brake bridge is not deep enough to insert the shortest caliper mounting nut I could find (10mm). The head of the nut should insert all of the way ...
3
votes
2answers
52 views

Suitable upright bar brake lever for old caliper brake

I want to replace my existing drop bar and levers with an upright bar and brake lever that will work with the old side pull weinmann synmetric 733 brakes, that are long reach at 65mm according to ...
0
votes
3answers
130 views

How do I know what is wrong with my brakes?

My brakes are not powerful anymore, it takes a few meters when fully pulling my brakes for my bike to come to a stop. Which means that the brakes'pads are touching the wheels but not enough. So, my ...
0
votes
1answer
317 views

Front brake cable loose from barrel adjuster

The cable for the front brake on a rim brake has come loose, and I can't get it to squeeze into the barrel adjuster screw properly.
2
votes
2answers
638 views

Recessed brake pivot nut stuck in carbon fork

The recessed pivot nut for my front brake calliper (no. 4 in this diagram) has seized inside the fork. I've managed to remove the brake calliper itself by unscrewing it from the front, but the nut is ...