Disc/rim/drum/coaster brakes; braking technique, maintaining brakes, nything else about stopping a bike.

learn more… | top users | synonyms (2)

1
vote
2answers
526 views

Cantilever brakes for older narrow fork bosses (55mm)?

I have an 80s cyclocross frame I am restoring. The fork's cantilever bosses are spaced at 55mm - much narrower than the modern standard (around 70mm I believe). I tried to fit a pair of Tektro ...
0
votes
1answer
147 views

Poor braking after rim change

I got a mid-80's Puch in great condition, and I replaced the original front wheel (steel) with a newer, aluminium one. But after the switch I have noticed that it doesn't brake as well as before. What ...
2
votes
1answer
272 views

V-brake seems asymmetrical

I'm not a big expert, so forgive me if I use some terms wrong (especially because I'm not a native English speaker). I have a MTB with V-brakes. I wanted to tune the rear brake because it looked ...
3
votes
1answer
451 views

Reverse center pull cantilever brakes (how to set up and issues)

Questions Q1. For rear cantilever brakes, are there any off-the-shelf parts or brake designs that route a rear brake cable from underneath the saddle cable instead of above? Q2. If not, then can ...
0
votes
1answer
133 views

Why is the front brake always on the left? [duplicate]

You often signal on a bike like you signal a car, with your left hand. This lets most people keep their good hand on the handle for steering. Some of my friends, though, signal with their right hand ...
0
votes
1answer
116 views

Disk Brake or V Brake [duplicate]

I am willing to buy a new mtb.But i am totally confused about which brake to choose.I want to do daily communication by my mtb. and also often want to do stunts.in this circumstances which kind of ...
3
votes
2answers
1k views

Will any Avid brake bleed kit work with my Promax brakes?

I need to replenish the fluid in my front brake on my Whyte Portobello (Promax Hornet disk brake) after all of the fluid leaked out through my own mistake. I'm looking at kits like this on eBay, ...
8
votes
2answers
311 views

Mountain bikes: Downhill braking

What's the better braking strategy for steep, technical descents? "Brake hard, then release completely & roll." vs. "Maintain constant pressure on the brakes."
4
votes
1answer
196 views

How brake pad dust/residue affect braking and rim life?

You know the dust that's left on the rims' groove after a while, does it have any significance in braking or rim life? When washing the wheels I just realised that the dust must be coming from brake ...
2
votes
1answer
230 views

Uneven Disc Brake performance

I'm using Hayes CX-5 Mechanical Disc brakes with Avid The G2 CleanSweep Rotors on my cross bike. I believe the Pads that come stock with Hayes CX-5 brakes are semi-metallic. I'm experiening uneven ...
2
votes
1answer
136 views

New Bicycle - Brakes Squeak [duplicate]

I just bought a new Schwinn Cutter, but my brakes are constantly squeaking when I apply them. It has nothing to do with weather as I haven't taken it out in the rain. The rims on the bike do have some ...
1
vote
3answers
351 views

How to compensate broken thread in brake barrel adjuster?

On my disc brakes I realized the barrel cable adjuster has its thread broken and most of it is stuck inside the calliper. The picture is not my brake but they are quite similar: the black barrel ...
3
votes
1answer
720 views

Alternative options for Trek FX 7.1 brakes

Around four months ago my parents bought me a Trek FX 7.1 for my birthday while I was at work. At first I was fairly excited and happy with it over my old Supercycle which served me well for the past ...
6
votes
2answers
1k views

Disc brake break-in?

Just got a bike with discs (BB7). The feel of the braking is so-so on the first ride (5km commute from LBS to home). I think the cable for the rear needs a little tightening. But even so, I don't ...
2
votes
1answer
4k views

How do I stop my rim brakes making making a squeaking/squealing sound?

I bought a Schwinn Frontier Sport few months ago and started riding happily. After a few weeks my front rim brakes started creaking. It's so annoying in public places. My rear brake doesn't produce ...
2
votes
1answer
2k views

How high should brake levers be on drop bars?

How high on the curve of the drop bars should brake levers be placed? Also, how does the angle of the drop bars affect the brake position? If these settings are dependant on body shape and ...
4
votes
0answers
61 views

What happened to rear levers for drop bar brakes? [duplicate]

I have a bike with an old set of second hand drop-bars, that have rear/upper bar brake levers, like this: I've been looking around at modern drop-bar brake levers, and it seems like no-one ...
4
votes
2answers
211 views

Add front brake and/or improve back brake on 2012 Specialized P.24?

I love the P.24. Sometimes I like to ride it on steep offroad downhills and keep it under control. Currently, my braking strategy is brake and bail if necessary. :) According to ...
0
votes
1answer
99 views

Correct way to apply brakes [duplicate]

Just to illustrate that there are better and worse ways to apply brakes, here's an example of a less-than-ideal way: I was biking on a borrowed bike and getting used to the brakes. The front brake ...
4
votes
1answer
4k views

What is the difference between different types of disc brake pads

I've seen several different descriptors for disc brake pads: Metallic, Semi-Metallic, and Organic. What is the difference between these types of disc brake pads?
2
votes
2answers
2k views

Grinding sound on new disc brakes

I have a new bike, probably a month old, which has Hayes cx 5 disc brakes. I've noticed that the front brake pad is making a grinding sound when I brake at low to moderate speeds. What could be ...
2
votes
1answer
101 views

When the the caliper brakes are applied, the pads barely move at all

I've done some light maintenance on cheap side caliper systems and I've run into this problem on a few older bikes. When the the brakes are applied, the pads barely move at all. I've adjusted the ...
1
vote
3answers
288 views

drum brakes and drop handle bars

I have sturmey archer xfdd and xrd5. Which brake lever are suitable for these and drop handle bars. The cable is road type with a barrel rather than a nipple.
1
vote
1answer
1k views

loose brake calipers

I have some dia compa ac 500 brakes on an old road bike. While the calipers are installed on the bike, with everything tightened, I can move (rotate) the calipers side to side with my hand. I've ...
1
vote
3answers
301 views

Mechanical-hydraulic hybrid brakes

I've heard about Mechanical-hydraulic hybrid brakes but didn't find any examples. Are they exist? If yes, are they comparable with hydraulic?
13
votes
3answers
6k views

do I need to change my disc if the brake pads got oil on them

In trying to change the brake pads on my mountain bike, I managed to get oil on my new pads and empty out all the brake fluid, and consequently also get some oil on the disc. I took the bike to the ...
0
votes
1answer
133 views

Caliper bolts after crash: repair or replace?

A few days ago, I was looking down checking out my crank while riding and drifted into the LA River Bike Path and ended up crashing bending my front brake caliper. Can the recessed bolt that holds ...
4
votes
1answer
1k views

Does having machined brake surface on rims matter?

I'm looking at getting a wheelset with disc hubs and rim brakes to run on my disc and non-disc cross bikes. There are stock wheels that have velocity a23 rims, which are a poupular rim brake ...
3
votes
1answer
401 views

How to remove play in cantilever pivot point?

I have been working my way through issues with noisy front cantilever brakes. After running through many different ways to solve the issue including new pads (Kool Stop Dura2 Duel Compound), setting ...
1
vote
1answer
263 views

When do my brake pads need replacement?

I have a bike that is almost two years old. It still has the original brakes (side pull caliper brakes), which seem to still be functional. However, they are worn and I am going to be doing a lot of ...
2
votes
2answers
711 views

Brake pads constantly touching the rotor because piston is not moving back

I recently replaced the brake pads on my hydraulic disc brake. The brakes are a Tektro Draco 2. Now the new pads are constantly touching the rotor. This is how it looks like with caliper ...
6
votes
2answers
587 views

How much time takes for hydraulic disk brakes to cool down?

Yesterday I was on a DH track for the first time. I have Avid Elixir 7 brakes with 203" rotor in front and 180" rear. The descent took about 5 minutes, and the ropeway up about 15 minutes. After 6 ...
1
vote
1answer
130 views

How much better are ceramic rims at wicking away water

I assume the best advantage to ceramic rims would be the ability to shed water easier due to their relative flatness. How much better are they? Does it make that much of a difference when breaking?
10
votes
4answers
1k views

Rolling backwards while pedaling forward on a Freecoaster

Can anyone tell me what happens when rolling backwards while pedaling forward on a freecoaster bike? I mean does it gradually slow it down, or does it come to an abrupt hault? I have not tried it yet. ...
1
vote
1answer
230 views

When to tune/replace brake cables for optimum tension

Original Question What physical symptoms do I need to look for to understand that my brake is out of tuning or the cables have reached end of life? It is not necessary to consider the brake shoes in ...
3
votes
2answers
10k views

How do I know whether my bike can use disk brakes?

I have a Gary Fisher bike (wahoo I believe). I think it's considered the entry level Fisher mountain bike. Could I put on disc brakes as opposed to using the standard brakes on this bike? Standard ...
4
votes
2answers
4k views

Can I convert flat bar to drop bars on a hybrid bike

I'm fairly certain that the bars should change out quite easily; I'm more concerned about the shifters and brakes. Currently I have a hybrid 18 speed with cable disc brakes and Shimano Deore XT ...
2
votes
1answer
422 views

Differences between symetrical and asymetrical brake pads for cantilever / v-brakes

What are the functional differences of the 'long tail' brake pads (more pad on one rear facing side of the post than the front side) versus the symmetrical (same amount of pad on either side of the ...
3
votes
1answer
226 views

Difference between brake pads on road and MTBs

I know that road caliper brakes use shorter (and wider?) pads than v-brakes and MTB cantilevers, but I don't exactly understand the reason behind. What would happen if I mount longer pads on ...
3
votes
2answers
802 views

What pads are compatible?

I have Tektro R320 Calliper brakes on my bike: http://planet-x-bikes.co.uk/i/q/BCTKTR320/tektro_r320_brake_caliper It's time for some new pads. However, the ones on this appear to be all in one, ...
6
votes
4answers
264 views

Concerns with different brake types for the front and the rear wheel

I'm considering adding a disc fork to my surly cross check and using some avid bb7 road brakes for the front. I've got tektro road levers on drop bars (outfitted with retroshift shifters) I've got ...
4
votes
1answer
625 views

What is lever throw and cable slack?

In a guide for adjusting Avid BB7 mechanical road disc brakes, it said: Only use the barrel adjuster at the brake lever to adjust for cable slack. For lever throw, use the outboard adjustment ...
1
vote
1answer
243 views

What is the standard diameter for BMX brake mounts

First of, these are the sort of brake mounts I'm talking about (though I believe the diameter is standard whether the mounts are removable or welded to the frame/forks): What is the diameter on the ...
1
vote
3answers
750 views

Thinking of upgrading my brakes to these, is there an issue with “mushy” braking?

I want to get these in combination with new levers for my bike, but under the description it says: "Use of these calipers with standard SLR enabled STI and brake levers results in a "mushy" brake ...
2
votes
2answers
904 views

Beside drive train, what is the difference between group components (e.g. 105 vs. Ultegra)?

In his previous post, jmusits asked the difference between the Shimano 105 and Ultegra drive train. Obviously, the derailleur is certainly one of the major components of a group. However levers, ...
1
vote
1answer
503 views

Brake pad rubbing the rim

I have a v-brake mounted on my bike. I can feel some stopping from the pads. If i spin the wheel, it stops because of one of the pads rubbing. I can't find a setting where one of the pads doesn't ...
3
votes
1answer
349 views

Life metrics for v-brake pads (time to replace, time to change)

I ride my bikes quite frequently and need to use the brakes slightly harshly (because of the traffic light changes and cars at my front) as I approach some gradients worth 40 degrees downhill. My ...
4
votes
1answer
598 views

How to prevent the quick-release pin on the Tektro drop brake lever from rattling?

Tektro RL-340 brake levers have a quick release mechanism that, when pushed in, will lengthen the cable to allow to easily disengage the brake from the wheel/disc without needing to deflate the tire. ...
12
votes
8answers
5k views

Is having your hands “on the hoods” of drop handlebars safe for braking?

I've never had a bike with drop handlebars, but may get one for commuting in busy London (likely a single-speed with mechanical disc brakes). This would mean riding with my hands mostly on the hoods, ...
2
votes
1answer
188 views

How can I fit this mudguard?

I thought this would be simple. The problem is that the entire brake assembly needs to be rotated to screw into a thread built-in to the fork. There's also a hex/allen hollow tube-nut at the back ...