Disc/rim/drum/coaster brakes; braking technique, maintaining brakes, nything else about stopping a bike.

learn more… | top users | synonyms (2)

1
vote
3answers
276 views

drum brakes and drop handle bars

I have sturmey archer xfdd and xrd5. Which brake lever are suitable for these and drop handle bars. The cable is road type with a barrel rather than a nipple.
12
votes
8answers
5k views

Is having your hands “on the hoods” of drop handlebars safe for braking?

I've never had a bike with drop handlebars, but may get one for commuting in busy London (likely a single-speed with mechanical disc brakes). This would mean riding with my hands mostly on the hoods, ...
6
votes
2answers
1k views

Disc brake break-in?

Just got a bike with discs (BB7). The feel of the braking is so-so on the first ride (5km commute from LBS to home). I think the cable for the rear needs a little tightening. But even so, I don't ...
2
votes
1answer
2k views

How high should brake levers be on drop bars?

How high on the curve of the drop bars should brake levers be placed? Also, how does the angle of the drop bars affect the brake position? If these settings are dependant on body shape and ...
4
votes
0answers
61 views

What happened to rear levers for drop bar brakes? [duplicate]

I have a bike with an old set of second hand drop-bars, that have rear/upper bar brake levers, like this: I've been looking around at modern drop-bar brake levers, and it seems like no-one ...
21
votes
14answers
11k views

When should I not use my front brake?

I have only been riding for a short time and I remember when I was a child there was a belief that if you used your front brakes going downhill that you would fly over your handlebars. However, my ...
0
votes
1answer
99 views

Correct way to apply brakes [duplicate]

Just to illustrate that there are better and worse ways to apply brakes, here's an example of a less-than-ideal way: I was biking on a borrowed bike and getting used to the brakes. The front brake ...
5
votes
4answers
2k views

What to buy when looking for a low maintenance city bike that allows sportive riding

I just want to replace my good old 50€ used Peugeot City Bike, that has served me well for the past year, but has some problems (like ribbed Steel Rims) that are hard to overcome. I want something ...
2
votes
2answers
2k views

Grinding sound on new disc brakes

I have a new bike, probably a month old, which has Hayes cx 5 disc brakes. I've noticed that the front brake pad is making a grinding sound when I brake at low to moderate speeds. What could be ...
4
votes
1answer
3k views

What is the difference between different types of disc brake pads

I've seen several different descriptors for disc brake pads: Metallic, Semi-Metallic, and Organic. What is the difference between these types of disc brake pads?
2
votes
1answer
101 views

When the the caliper brakes are applied, the pads barely move at all

I've done some light maintenance on cheap side caliper systems and I've run into this problem on a few older bikes. When the the brakes are applied, the pads barely move at all. I've adjusted the ...
13
votes
2answers
49k views

Converting bike from rim brakes to disc brakes

I just bought a used 2009 Kona Dew and it comes with regular rim brakes. I'm perfectly happy with them so far, but have been wondering if disc brakes would come handy when it rains. What is involved ...
5
votes
5answers
5k views

Dealing with very juddery cantilever brakes

I'm a commuter with a ~13m daily round-trip. I've been riding this on an MTB for 8 years, but I'm looking to upgrade. I recently tried out a 2012 model Specialized Tricross; this having been ...
1
vote
1answer
1k views

loose brake calipers

I have some dia compa ac 500 brakes on an old road bike. While the calipers are installed on the bike, with everything tightened, I can move (rotate) the calipers side to side with my hand. I've ...
22
votes
6answers
2k views

Why do the front and rear brakes work independently?

Why do bicycles have two individual brake levers that work independently to brake each wheel? I've always used my right brake lever because it is more comfortable to do so and I haven't noticed any ...
1
vote
3answers
287 views

Mechanical-hydraulic hybrid brakes

I've heard about Mechanical-hydraulic hybrid brakes but didn't find any examples. Are they exist? If yes, are they comparable with hydraulic?
0
votes
1answer
131 views

Caliper bolts after crash: repair or replace?

A few days ago, I was looking down checking out my crank while riding and drifted into the LA River Bike Path and ended up crashing bending my front brake caliper. Can the recessed bolt that holds ...
4
votes
1answer
1k views

Does having machined brake surface on rims matter?

I'm looking at getting a wheelset with disc hubs and rim brakes to run on my disc and non-disc cross bikes. There are stock wheels that have velocity a23 rims, which are a poupular rim brake ...
6
votes
2answers
560 views

How much time takes for hydraulic disk brakes to cool down?

Yesterday I was on a DH track for the first time. I have Avid Elixir 7 brakes with 203" rotor in front and 180" rear. The descent took about 5 minutes, and the ropeway up about 15 minutes. After 6 ...
1
vote
1answer
260 views

When do my brake pads need replacement?

I have a bike that is almost two years old. It still has the original brakes (side pull caliper brakes), which seem to still be functional. However, they are worn and I am going to be doing a lot of ...
18
votes
6answers
7k views

Can your rims wear down from too much braking?

I have a question about rims based on information in another question. The person asking states that he doesn't want his rims wearing down. Is this really a problem? Assuming you don't wear the ...
10
votes
4answers
1k views

Rolling backwards while pedaling forward on a Freecoaster

Can anyone tell me what happens when rolling backwards while pedaling forward on a freecoaster bike? I mean does it gradually slow it down, or does it come to an abrupt hault? I have not tried it yet. ...
1
vote
1answer
220 views

When to tune/replace brake cables for optimum tension

Original Question What physical symptoms do I need to look for to understand that my brake is out of tuning or the cables have reached end of life? It is not necessary to consider the brake shoes in ...
3
votes
2answers
9k views

How do I know whether my bike can use disk brakes?

I have a Gary Fisher bike (wahoo I believe). I think it's considered the entry level Fisher mountain bike. Could I put on disc brakes as opposed to using the standard brakes on this bike? Standard ...
3
votes
2answers
741 views

What pads are compatible?

I have Tektro R320 Calliper brakes on my bike: http://planet-x-bikes.co.uk/i/q/BCTKTR320/tektro_r320_brake_caliper It's time for some new pads. However, the ones on this appear to be all in one, ...
4
votes
2answers
4k views

Can I convert flat bar to drop bars on a hybrid bike

I'm fairly certain that the bars should change out quite easily; I'm more concerned about the shifters and brakes. Currently I have a hybrid 18 speed with cable disc brakes and Shimano Deore XT ...
2
votes
1answer
402 views

Differences between symetrical and asymetrical brake pads for cantilever / v-brakes

What are the functional differences of the 'long tail' brake pads (more pad on one rear facing side of the post than the front side) versus the symmetrical (same amount of pad on either side of the ...
3
votes
1answer
217 views

Difference between brake pads on road and MTBs

I know that road caliper brakes use shorter (and wider?) pads than v-brakes and MTB cantilevers, but I don't exactly understand the reason behind. What would happen if I mount longer pads on ...
2
votes
2answers
874 views

Beside drive train, what is the difference between group components (e.g. 105 vs. Ultegra)?

In his previous post, jmusits asked the difference between the Shimano 105 and Ultegra drive train. Obviously, the derailleur is certainly one of the major components of a group. However levers, ...
4
votes
1answer
608 views

What is lever throw and cable slack?

In a guide for adjusting Avid BB7 mechanical road disc brakes, it said: Only use the barrel adjuster at the brake lever to adjust for cable slack. For lever throw, use the outboard adjustment ...
1
vote
1answer
222 views

What is the standard diameter for BMX brake mounts

First of, these are the sort of brake mounts I'm talking about (though I believe the diameter is standard whether the mounts are removable or welded to the frame/forks): What is the diameter on the ...
34
votes
14answers
6k views

Safest way to slow down a bike quickly if both sets of brakes fail

This may sound like a crazy question, however today in the wet my rear brakes decided to stop working effectively. It has been pouring rain here which makes the problem more apparent. I managed to ...
1
vote
1answer
479 views

Brake pad rubbing the rim

I have a v-brake mounted on my bike. I can feel some stopping from the pads. If i spin the wheel, it stops because of one of the pads rubbing. I can't find a setting where one of the pads doesn't ...
3
votes
1answer
321 views

Life metrics for v-brake pads (time to replace, time to change)

I ride my bikes quite frequently and need to use the brakes slightly harshly (because of the traffic light changes and cars at my front) as I approach some gradients worth 40 degrees downhill. My ...
4
votes
7answers
3k views

Why do my brakes squeak? Do I have an incorrect distance between brake pads and rims?

My brakes were working normally until I adjust them today. I thought the brake pads were too close to the rims so I increase the distance a bit. Now every time I brake, they make horrible squeaking ...
6
votes
5answers
4k views

How do I prevent my hydraulic brakes from getting pressed/damaged when the wheels are off?

When I was buying my bike, the technician in the shop told me not to press the brakes when the wheels are off (detached), otherwise the brakes will get damaged (I don't know how). I need to detach ...
2
votes
1answer
185 views

How can I fit this mudguard?

I thought this would be simple. The problem is that the entire brake assembly needs to be rotated to screw into a thread built-in to the fork. There's also a hex/allen hollow tube-nut at the back ...
4
votes
2answers
1k views

What is the braking (stopping) distance for bicycles?

A vehicle driver must keep enough braking distance (aka stopping distance) between him/her and a vehicle in front in order to avoid collision. It depends on the driving speed. What is the braking ...
4
votes
4answers
2k views

How can I stop a belt brake (band brake) from squealing?

One of our bikes is an electric bike. It's an older iZip HG 1000, and although we got it through the American "manufacturer" (Currie Technologies), like most of the low-end ebikes it's made in China ...
9
votes
1answer
2k views

Disabling back-pedal brake

I have a bike with the so-called back-pedal brake, but since it's for someone who's learning I think that it's more an obstacle than an advantage. Since the bike also has hand-actioned brakes, can I ...
2
votes
1answer
160 views

Rear brake rubs against the tire

I just had my rear tire replaced at an -- admittedly shady -- bike shop, and now the upper part of the rear brake is rubbing against the lower part of the tire: The yellow dust on the picture ...
0
votes
1answer
730 views

Brakes contacting wheel after reattaching

I removed the rear wheel (quick release) from my Trek bike to install a bike trailer hitch. After replacing the wheel, the brake pads are rubbing. I did over-tighten the wheel when I first put it ...
1
vote
2answers
386 views

What torque for caliper brakes onto carbon-alloy forks?

I've recently got a new bike with a Kinesis DC07 carbon/alloy fork. This comes with deep-drop calliper brakes (Shimano R451 Dual Pivot). The first time out I bumped one of the brakes and it twisted ...
1
vote
2answers
224 views

Cannot raise V-brake blocks high enough to align with wheel rim

After adjusting my V-brake blocks to their highest setting on the lever, they still do not align with the wheel rim (they sit half on, half off). Is there any thing I can do about this, or is it an ...
3
votes
2answers
3k views

How do I align my front brake disk with the caliper?

I have manual Avid disc brakes. I took my front wheel off like I've done hundreds of times. When I put it back on the wheel is aligned properly with my fork, but the disc presses against one of the ...
1
vote
2answers
358 views

Upgrading my cockpit- brakes, stem and bars for longer reach

I want to upgrade my cockpit so that I have a longer reach. I currently use it as my city bike. Its an old vintage HR bates frame. Currently the stem is a little short. I want to change the bars - ...
0
votes
1answer
204 views

Cycling fast - and brakes don't work - what to do? [duplicate]

I hope this doesn't occur to any of us, but it can. What must the cyclist do when he/she is cycling (too) fast and needs to stop or slow down immediately, but neither the front and rear brakes work ...
3
votes
1answer
1k views

How do to determine if an adapter is needed for disc brakes and rotors?

I have an old older (not too old) bike that already has disc brakes, but I would like to replace them with a totally new set and new rotors. How can I determine if a given replacement (caliper and ...
10
votes
6answers
1k views

How many fingers on the brake lever?

I have seen people stop with one finger, two fingers or the whole hands on the levers. Is there a recommended number of fingers on the brake levers when stopping/anticipating an emergency stop? Do ...
2
votes
2answers
228 views

Replaceable cartridges for rim brakes

I have a set of Shimano CX70 canti brakes the pads of which are replacable by changing the pad only (cartridges). I see in no document for any specification of a cartridge that fits. Are brake ...