Disc/rim/drum/coaster brakes; braking technique, maintaining brakes, nything else about stopping a bike.

learn more… | top users | synonyms (2)

6
votes
1answer
417 views

Fitting brake cables on Tektro rl726 levers

Iv'e got some Tektro RL726 brake levers that I want to fit to a project bike. I bought the cables online & they have arrived with a stopper on both ends. Am I right in thinking I have to cut one ...
6
votes
2answers
2k views

How to prevent my disc brakes from locking/sticking due to debris?

Context: I have a commuter/crossover bike with disc brakes, and a daily commute of ~20km. I upgraded to a bike with disc brakes after standard caliper brakes kept losing their stick and requiring pad ...
1
vote
3answers
659 views

Do brake hoods come in different sizes?

I have a Ribble Sportive Carbon road bike. The brake hoods are much smaller than most other bikes whihc makes them much less comfortable than other bikes (Scott, Specialised etc.) Can I just replace ...
0
votes
2answers
1k views

My v-brake lever (just one) is stiff. What's wrong?

After tuning my brakes a lot (I was learning how) I noticed suddenly my back brake got really stiff. Does't really matter if the cable is loose or not, the lever itself feels really hard to pull when ...
3
votes
1answer
504 views

Looking for components needed to route 3 cables on top of toptube for cyclocross bike

My bike is setup for cable routing under the downtube. I would like to route my rear brake, front derailleur, and rear derailleur cables along the top tube of a bike I plan to use for cyclocross to ...
3
votes
2answers
174 views

Brake lever seizing up from cold

I have perfectly ordinary standard-pull brake levers on my bike. When the temperature gets below 20F or so, the left-hand one seizes up, not wanting to pull, and not braking well if I force it. Once ...
4
votes
2answers
365 views

CB Roubaix upgrade to Shimano Tiagra - brake problems

I installed the new Tiagra brakes (4600) to my Claud Butler bike following the accompanying instructions. I've also installed new Tiagra levers. There is not enough adjustment in the brakes to allow ...
8
votes
4answers
4k views

How do I get my brakes to stop squealing [duplicate]

I've tried sanding them down just a bit, cleaning the brake surface on the wheels, and this does stop them from squealing for a day or two, but it always comes back. I'm using Kool-stop pads if it ...
5
votes
6answers
4k views

Is there a reason for brakes to be reversed in bikes with Hydraulic Brakes?

I recently bought a MTB with Hydraulic Disk Brakes, and am finding really hard to adjust with the braking system. From the very beginning I was cycling with Front brakes on right hand. But now its ...
6
votes
2answers
440 views

Replacing brake system on a bike

Is it possible to change the braking system from rim brakes to rotary. I want to replace them because I hate how after a while the pads wear out and I need to replace it so I think the rotary might be ...
0
votes
2answers
204 views

Which brake posts do I need?

I have a Schwinn Rocket mountain bike with front and rear V-brakes. While removing the rear brakes to be replaced with higher quality ones, I managed to twist one of the brake posts out of the frame ...
1
vote
2answers
182 views

installing brand new cartridge brakes, something seems fishy

So I am installing a brand new cartridge brake pad assembly on my mountain bike. I noticed that the brakes have a left and right written on them so i install them properly. What seems fishy to me is ...
4
votes
2answers
759 views

Rollerbrakes very noisy when used

One of my bikes has "rollerbrakes" (commuter bike). When I brake very gently, they work silent. If I squeeze the brakes a liiitle more, I hear a terrible metal to metal screaching sound. It makes ...
7
votes
4answers
410 views

V-brakes during winter?

I'm considering some Schwalbe Marathon Winter tires so I can continue commuting to work during the UK winter ( -3°C to +8°C, with some snow and ice). However, I only have V-brakes. Are those brakes ...
5
votes
3answers
590 views

Is there a good way to clean brake hoods?

I just picked up an old bike with white brake hoods. They are pretty gnarsty, covered in a greyish brown layer of filth. I've tried a soapy rag and scrubber brush with elbow grease. It takes care of ...
4
votes
2answers
349 views

Which brake is most expendable?

I'm thinking of removing a brake(front or back) to reduce weight and simplify my bike. Which brake is most expendable? Its your average fixie road bike.
0
votes
2answers
1k views

Adjust reach on Ultegra ST-6510 levers?

I'd like to adjust the reach (distance from the drop bars to the brake levers) on my Ultegra 6510 levers. The Shimano instructions don't mention the ability to adjust this at all, which seems odd to ...
9
votes
4answers
10k views

Front brake only on a fixed-gear bike

Is it considered safe-enough to only have a front-brake on a fixie in a urban area that has many hills? I've been considering buying one, but I want to get some opinions before I move forward.
2
votes
2answers
2k views

Am I better off buying a new bike, or upgrading my old bike?

Half a year ago I started to use again my old Schwinn Woodlands MTB for commuting. I didn't want to spend a fortune on a new bike, I wasn't certain that I would like to bike commute daily. Bike has ...
3
votes
3answers
3k views

How do I use retro drop down handlebars with no hoods?

The preface this, I am just going to say that I am awful on a bicycle. I have recently gotten a bike that I love, it's beautiful, and I love riding it, however the drop handlebars have no hoods so ...
3
votes
1answer
534 views

What are the alternatives to SwissStop Blue v-brake pads

We've got a tandem with Rigida Andara CSS tungsten carbide rims and Swisstop Blue v-brake pads. We're happy with the performance and life of both of these over the last 1000 miles. The problem is ...
3
votes
3answers
2k views

could I mount a different manufacturer brand rotor to use with my brakes?

I've a tektro draco hydraulic brakes on my mtb and I would like to know if it is possible to mount a different brand rotor to use with my brakes?
2
votes
1answer
266 views

Brake response is spongey post-brake lever upgrade

I have just performed an upgrade of brake levers on my Plug Racer, from the original cross-style levers (top mounted, possibly Promax 239A models) to Cane Creek 200TT bar end levers, connecting them ...
3
votes
1answer
583 views

Will a road brake lever work with a v-brake?

I'm planning on changing my commuter handlebar to a drop handlebar. As the diameters are different, I need to know if the new brake lever will work with the existing v-brakes. (My intention is to ...
1
vote
1answer
384 views

Do I need better “springs” on my disc brakes?

After 20 years commuting on old/cheap bikes, I finally evolved up to a nice solid touring rig with cable disc brakes (Avid BB5). I love the bike and the brakes. They're much easier to maintain, ...
2
votes
1answer
849 views

Can you add oil to a hydraulic disc brake reservoir without bleeding the brakes?

Is it possible to add oil to the hydraulic disc brake reservoir to increase the stiffness of the lever, without bleeding the brakes?
1
vote
3answers
931 views

Cantilever cable adjustment device

I'm about to build up a frame (Motobecane Fantom CX) with cantilevers and drop bars. I plan to use my old Campy 9-speed levers. Obviously, those levers don't have any way of adjusting the cable length ...
13
votes
2answers
4k views

What does “modulate” mean when referring to brakes?

Often in a review of brakes, or an article talking about braking the author will use the term "modulate." E.g. "The brake modulates well" or "Modulate your front brake." What exactly does this term ...
7
votes
3answers
3k views

Do I need to replace hydraulic fluid in my brakes?

I've had my bike (GT Avalanche 1) for maybe four or five years now. I've changed the pads once, removed and cleaned all parts on the bike a few times now, but I've never touched the brake fluid. ...
5
votes
3answers
2k views

How do I make a road brake lever work alongside a mtb brake lever

If I manage to get a dropbar on my mtb and want to use both the MTB brake lever AND the road dropbar brake lever (like the Tiagra STI, but no gear shifting)... Is it possible? Can they use the same ...
2
votes
2answers
262 views

Problems with brake discs

I recently bought a new bike. It is a Scott bike with disc brakes. The bike went in for it's service and now it has problems braking. As soon as I pull the brake leavers the front brakes makes a loud ...
2
votes
1answer
535 views

Can I use long reach calipers on my cyclocross bike?

I've got cx bike(Centurion Cyclocross 4000) which I currently use only for commuting and riding long distances on a road. Is it possible to use some longreach caliper brakes on it (e.g. Shimano BR-650 ...
1
vote
3answers
229 views

Which rotor, Steel or Titanium comes with Avid CODE brakes?

I just bought Avid CODE brakes. It comes with a rotor (200mm). I checked the website and manual and I can't find out if the rotor is stainless steel or the titanium version. How can I tell? ...
2
votes
2answers
271 views

How to improve front brake functionality?

My front brake (cantilever brakes) does not make contact with the rim until I pull the brake levers almost all the way in, leaving me with very little space to apply extra force. That means the brakes ...
1
vote
1answer
854 views

Brake cable housing doesn't attach to lever

I got a new bike but the front brake doesn't work. I tried reading up about the brake system on line and learned quite a bit (they're cantilever brakes). But I am missing something elementary and ...
6
votes
5answers
16k views

How often should disk brakes need bleeding?

The brake handles for my disk brakes became very loose four months after I bought the bike. The bike shop bled the brakes and put new oil in them, which sorted it. They're feeling a bit loose again ...
4
votes
1answer
326 views

How to properly adjust rim brakes for a touring bike?

My touring bike needs new brake pads, and I'm about to do the swap. I've done it before, and plan to consult the usual YouTube videos to refresh myself in the procedure. (Brakes are something where ...
4
votes
2answers
736 views

Do brakes provide full power when used from the hoods?

I have been riding mountain bikes for over 20 years and am just going back to a road bike. I find the modern bars and hoods and combined levers a very strange position. I have actually loosened them ...
4
votes
3answers
270 views

Can I damage my brakes by testing them vigorously?

My understanding is that it’s important to regularly test one’s brakes, by grabbing the lever and squeezing it hard, perhaps all the way down to the bars. The theory is that if they’re going to fail, ...
4
votes
3answers
637 views

How bad is this broken brake cable strand?

I just bought a new bicycle. While I was fiddling with things (removing tags, mounting a light, etc.) I noticed that the boot on the rear brake cable was loose. When trying to reseat it, I found that ...
2
votes
1answer
10k views

How to adjust Avid Elixir 1 hydraulic disc brakes?

I have a Trek X-Caliber and the rear disc is rubbing a little. So I want to adjust the brakes so it doesn't rub and make things a bit easier of course. I see many videos about brake adjustment but ...
2
votes
3answers
445 views

Why do you think I nearly fell on this turn?

I was riding my new Scott road bike yesterday and I nearly took a terrible fall. The pavement was wet and there was a curve. I was riding approximately 15 mph and I braked with the rear brake. As I ...
15
votes
3answers
2k views

How do I prevent disk brakes from squeaking in the rain?

When I got my new bike with disk brakes, I thought that they would perform much better in the rain. While this is true, they still squeak quite loud in wet conditions, which is quite annoying. Is ...
11
votes
8answers
575 views

Are there devices to moderate speed on mountain descents without braking?

In my neck of the woods there are some mountain descents that are pretty substantial: say 600 meters vertically averaging 7% grade, with lots of curves and other obstacles like potholes. Typically the ...
1
vote
1answer
309 views

Replacing 'cone nuts' on a damaged coaster brake

I'm attempting to refurbish a bike that I was given, it has a (not sure what brand) coaster brake, which according to sheldon brown's site has a peculiar kind of cone nut. The wheel might be 10 years ...
5
votes
2answers
348 views

Where to get the short wire of the cantilever brake?

I was riding my bike and rear brake fell apart. As a result I lost the short wire of the cantilever brake, or at least that what it seems to be called. Where can I buy that short cable please ? Here ...
6
votes
3answers
2k views

Disk brake has never worked properly from new, pads replaced - still rubbish!

I've got Shimano hydraulic disc brakes and ever since I've had the bike (from new) the front brake has never worked properly. It used to squeak really loudly and perform badly but I assumed they just ...
6
votes
1answer
9k views

How do I bleed Avid Elixir brakes

My bike has a set of Avid Elixir R hydraulic brakes. The front brake barely goes on when I pull the lever and the back brake feels pretty soft. I think I need to bleed them. How do I go about doing ...
3
votes
2answers
317 views

Can i use v brakes on racing bike rims?

i fitted a set of cheap "thin" (racing bike size) rims with 32 mm tyres. the fork allows even bigger tyres to be mounted. is it a problem if i fit the bike with Deore LX v-brakes ? will it brake ...
3
votes
2answers
298 views

Stop my front brake lever screws from vibrating out?

One of the most common maintenance tasks on my Mongoose Tyax Super is to tighten a small screw in my front brake level. It shakes loose both due to use, and from a habit I picked up riding in ...