A couple of years ago I tightened the bolt attaching my rear mudguard/fender to the eyelet at the hub and it snapped, leaving a 5mm long section of bolt stuck in the thread. Since then I've tried ...
I'm wondering what the purpose of the braze-on pictured below is? It's on the non-drive side of my fork. I thought it could have something to do with racks, but then I figured they would put one on ...
I have a Jamis Citizen 2 Step through (2013 or 14 maybe) which has a braze-on on the underside of the seat stay near the brake studs. Just one braze on each side. I'm curious as to what the intent ...
I own a 1988 Schwinn Le Tour. It's beginning to show its age-- the original paint is chipped in many places and the frame is rusting underneath. The worst areas, by far, are around the rear brake ...
I have a Trek 7200 (Alpha aluminum frame) and it has two water bottle holder mountings, the top braze-on on the seat tube seems to have broken from over-tightening and has sunk into the frame. These ...
Years ago, I made the newbie mistake of forcing a rack screw into a steel braze-on. I had to replace that fork. And I've heard this advice many times: When putting a screw into a braze-on, put a ...