The tag has no wiki summary.

learn more… | top users | synonyms

3
votes
1answer
74 views

Modifying Brake Cable to Fit?

I have recently decided to replace my brake cables before a particularly long ride, since they haven't been replaced in a number of years. The problem I have is that the stock rear cable on my bike ...
5
votes
1answer
117 views

What is the actual cable pull of brake levers?

I understand that there are 2 brake lever cable pull standards: Standard Pull Levers Long Pull Levers (for V-brakes and disc brakes) But what is the actual difference in pull? And specifically: ...
1
vote
0answers
166 views

Use of Shimano long-reach calipers with “New Super SLR” brake levers/shifters

So my bike has Shimano Tiagra ST-4600/4603 brifters (it's a triple) but is fitted with long-drop BR-R451 calipers. In theory, these should be incompatible because of the change in cable pull ratio, ...
7
votes
2answers
240 views

Do I need to plug internal cable routing ports?

I have just ordered a OneUp Components 42T sprocket and a Race Face 30T Narrow/Wide single ring so that I can convert my 3x10 drive train into a 1x10. This means that I'll be removing the front ...
2
votes
2answers
124 views

Buying brake levers, how do I find the correct ones for my bike?

I took a hard spill the other day on my mountain bike and snapped my left hand brake lever in to pieces. The ones that snapped are stock alloy rubbish that came with a Specialized Hardrock 2010 Disc ...
3
votes
1answer
257 views

Reverse center pull cantilever brakes (how to set up and issues)

Questions Q1. For rear cantilever brakes, are there any off-the-shelf parts or brake designs that route a rear brake cable from underneath the saddle cable instead of above? Q2. If not, then can ...
11
votes
4answers
259 views

Why does cable routing utilize alternation of sections of shielded and unshielded cable?

Why do manufacturers do this? What's even more interesting, many a bike have the middle cable fully housed, while the other two are "interrupted" as shown above. IMHO those are the pros and cons of ...
5
votes
3answers
803 views

Can you buy bulk shifting/brake cable for road bikes?

Is it possible to buy bulk amounts of shifting/brake cable for road bikes? It would be nice to just have a spool of wire that you run onto your frame and then cut off only as much as you need. A ...
3
votes
2answers
221 views

How to route cables aroung the head tube?

Consider this illustrative picture: The cables are routed "across" the heatube. Id est the cable leaves the shifter, crosses the headtube and then curves back under the top or bootom tube. I often ...
4
votes
2answers
130 views

Should I oil new cable housings?

When installing new cables and housing, is is wise to oil the housing? If so, how? Here Hicks recommends spraying (but for re-newing old cables). On the other hand, I have found it intuitive to put ...
4
votes
2answers
714 views

What's the deal with compressionless brake cable housing?

Ok folks, I'm confused and in need of advice. On my commuter (touring) bike, I just upgraded my BB5's to BB7's. In the process, decided/realized that I also need to replace my cables and housing ...
2
votes
3answers
937 views

How to replace a Sturmey Archer's cable?

I would like to replace the cable of a Sturmey Archer hub, but can't find a way to disassemble the old cable without destroying it, and it puzzles me how to insert the new cable. To better explain, I ...
1
vote
1answer
155 views

When to tune/replace brake cables for optimum tension

Original Question What physical symptoms do I need to look for to understand that my brake is out of tuning or the cables have reached end of life? It is not necessary to consider the brake shoes in ...
4
votes
1answer
324 views

What is lever throw and cable slack?

In a guide for adjusting Avid BB7 mechanical road disc brakes, it said: Only use the barrel adjuster at the brake lever to adjust for cable slack. For lever throw, use the outboard adjustment ...
6
votes
7answers
867 views

What is a good replacement for a cable end cap?

I was adjusting the tension of my front derailleur cable and managed to pop off the cable end cap. The cable is now quite frayed at the end and I think it would be difficult to attach another cap. ...
1
vote
6answers
134 views

How to prevent the derailleur cable fibres getting all over the places?

My bike is only 7 months old, but the front derailleur cable fibres are becoming loose i.e. the individual thin metal fibres twised together to form the cable are loosing out. I think I have lost the ...
1
vote
3answers
894 views

How do I prevent STI shifter cables from blocking access to my Randoneering Bag or Handlebar bag?

I've got drop bars with Shimano Tiagra STI shifters and want to use a Rando Bag on my small front rack or a handlebar mount bag. Currently the shift cables jut out between the drop bars and hit in to ...
2
votes
1answer
406 views

Brake cable housing too long?

I replaced the no-name brake calipers on my bike with Ultegras today. Am I correct in thinking the rear brake housing is too long and needs to be shortened? And if so, how do I determine how much to ...
1
vote
1answer
140 views

Front derailleur cable change

I changed my shifters and need to change my front derailleur cable. I just don't know how to proceed exactly. A guide I found told me to: on big sprocket, small plate (is that the english word?? ...
0
votes
2answers
789 views

My v-brake lever (just one) is stiff. What's wrong?

After tuning my brakes a lot (I was learning how) I noticed suddenly my back brake got really stiff. Does't really matter if the cable is loose or not, the lever itself feels really hard to pull when ...
3
votes
1answer
403 views

Looking for components needed to route 3 cables on top of toptube for cyclocross bike

My bike is setup for cable routing under the downtube. I would like to route my rear brake, front derailleur, and rear derailleur cables along the top tube of a bike I plan to use for cyclocross to ...
4
votes
3answers
400 views

Cable routing and why is there no optimum solution

This is a general question, regarding the routing of the cables of both brakes and derailleurs on a frame. I find it highly practical to mount all cables along the bottom of the top tube. This ...
2
votes
2answers
616 views

What is this cable/hose management clip? (picture)

I've purchased a RockShox Reverb seat post, and its come with these delightful little Cable/Hose clips. Since my bike frame only comes with built in cable clips for the brakes and shifters, these ...
1
vote
1answer
283 views

Do I need better “springs” on my disc brakes?

After 20 years commuting on old/cheap bikes, I finally evolved up to a nice solid touring rig with cable disc brakes (Avid BB5). I love the bike and the brakes. They're much easier to maintain, ...
3
votes
1answer
144 views

What tricks do you use to avoid damaging cables when adjusting the gears?

I was trying to adjust gears, and being my first time, I ended up damaging the cable. I mean that I "smashed" it, the threads became apart, and it was dangerous to deal with it. I replaced the cable, ...
1
vote
1answer
627 views

Brake cable housing doesn't attach to lever

I got a new bike but the front brake doesn't work. I tried reading up about the brake system on line and learned quite a bit (they're cantilever brakes). But I am missing something elementary and ...
4
votes
3answers
512 views

How bad is this broken brake cable strand?

I just bought a new bicycle. While I was fiddling with things (removing tags, mounting a light, etc.) I noticed that the boot on the rear brake cable was loose. When trying to reseat it, I found that ...
5
votes
2answers
245 views

Where to get the short wire of the cantilever brake?

I was riding my bike and rear brake fell apart. As a result I lost the short wire of the cantilever brake, or at least that what it seems to be called. Where can I buy that short cable please ? Here ...
6
votes
3answers
2k views

Why does my bike stick in low gears?

When I change into a low gear (i.e. onto a bigger cog) on my back cog all is fine. However, when I later change up again the chain sticks on the larger cog. I commute about 10 miles a day and this has ...
2
votes
2answers
198 views

How do you switch grip shifters from shifting as if they were on the opposite derailleur?

I was replacing cables on grip shifters recently and when I put them back together they acted as if they were on the wrong side. By that I mean the front shifter (3 chain rings) were shifting 7 times ...
6
votes
5answers
893 views

Do brake cables become more elastic with time?

I bought a used bike a few months ago, and I've noticed a drastic reduction in brake power. At first, I was easily able to lock-up the rear wheel while squeezing the brake lever only half-way to the ...
6
votes
2answers
651 views

Cleaning Cable Housing?

I commute about 3600 miles a year and I am able to keep my gears adjusted pretty well. I do find that I get a lot of grime from rainy, muddy conditions, and I think I might be replacing my shift ...