So my bike has Shimano Tiagra ST-4600/4603 brifters (it's a triple) but is fitted with long-drop BR-R451 calipers. In theory, these should be incompatible because of the change in cable pull ratio, ...
I recently bought a bike from bikes direct (The kilo TT stripper). Its a fixed gear bike that came with a front and rear brake. I was able to setup everything but the brakes. The brakes are: ...
What is the best way to lubricate gear and brake cables in their tubular housings? Up until now, I've used CRC/WD-40 with an extension tube and attempted to squirt the lubricant into the tube ...
I was adjusting the tension of my front derailleur cable and managed to pop off the cable end cap. The cable is now quite frayed at the end and I think it would be difficult to attach another cap. ...
This is a general question, regarding the routing of the cables of both brakes and derailleurs on a frame. I find it highly practical to mount all cables along the bottom of the top tube. This ...
My bike is only 7 months old, but the front derailleur cable fibres are becoming loose i.e. the individual thin metal fibres twised together to form the cable are loosing out. I think I have lost the ...
After 20 years commuting on old/cheap bikes, I finally evolved up to a nice solid touring rig with cable disc brakes (Avid BB5). I love the bike and the brakes. They're much easier to maintain, ...