The tag has no wiki summary.

learn more… | top users | synonyms

1
vote
2answers
29 views

Campagnolo Athena - Lost plastic part on front derailleur. Now the chain is droping on upshifting

Somehow the plastic part on the side/front of the derailleur is lost. Now I can't shift properly because the chain drops to the outside on an up shift. The plastic part is visible in this image. Its ...
0
votes
1answer
27 views

Campagnolo Ultrashift, Escape, Powershift Identification

Can anyone help identify if this generation of Campagnolo Chorus 10 speed alloy-only is ultrashift, escape, powershift, etc? I've done a bit of googling, but without much more knowledge on the parts, ...
2
votes
1answer
34 views

Campy Chorus Shifter

I just bought a used bike but I'm unsure of the condition of the brifters (Campy Chorus 10 alloys). When set up, the brake lever is pulled outwards by the brake cable, away from the shifting pedal. As ...
1
vote
1answer
21 views

SRAM Cassette on Campy Wheels

I wrecked my current wheel set in a crash and am considering purchasing a set of Campy Hyperons from a friend. AFAIK the wheels are stock and haven't been tweaked in any way. I would like to know if ...
1
vote
1answer
50 views

Campagnolo Ergopower Chorus 9 inaccurate shifting

My Chorus 9 Speed Ergo-power (~2005) got inaccurate during shifting. The local bike repairman couldn't get the dérailleur to shift properly. Sometimes the chain don't jump down or up after shifting. ...
1
vote
3answers
92 views

Chain length and cassette tooth count relationship

A little context first: I'm going to be riding in the French Alps and plan to tackle some of the classic climbs (Alpe D'Huez, Galibier, etc) next month - I currently have a Campagnolo Athena 50/34 ...
2
votes
1answer
57 views

Finding a single speed kit for an old campagnolo from 1997 with screw on freehub

I have an old Campagnolo from 1997 that I want to turn into an single speed. My problem is finding a kit that will fit the freehub. The outer diameter of this freehub including teeth is 34 mm, but ...
3
votes
1answer
52 views

Campagnolo Record C9 / Shimano CS-HG200-9 incompatibility

I drive cheap Shimano cassettes together with Campagnolo Record C9 chains. Yesterday I installed a new C9 and a CS-HG200-9. But the chain sort of slips over the sprockets, not unlike really worn ...
5
votes
2answers
94 views

3 Speed Front Derailleur can't reach small gear

I bought a new frame and put my old Campagnolo Racing T components on it. The seat tube has a diameter of 35mm and I use the Campagnolo 35mm clamp for the Racing T derailleur. The problem is the ...
0
votes
0answers
124 views

Single speed conversion kit

I have an old Battaglin road bike from 1997 that I want to convert to a single speed. My issue is; what conversion kit to buy? The rear hub spline (not sure this is the correct term) has a 4x4 ...
2
votes
2answers
56 views

Does anyone know of a machinist who could convert a dual ring Campy Nuovo Record chainset ('spider') to accept a 3rd chainring?

I have a 1971 Raleigh International whose Campagnolo Nuovo Record chainset has Campy pedals that are 'frozen' into their threads (I know, this is an instance of neglected maintenance). I really like ...
1
vote
2answers
148 views

Campagnolo Crank Compatibility 11 speed crank to 9 speed chain/deraillieur/shifters

I need to replace my 9 Speed Campagnolo Racing T Crank with a new one which uses the power torque system. Is a 11 Speed Athena (or 10 speed Centaur) crank compatible with the racing t front ...
0
votes
1answer
106 views

Rear derailleur shifts all gears at once

I've got Campagnolo Veloce gear system and I recently changed my worn-out rear cassette to a new one. Since then I've experienced issues when shifting to higher gears. When I shift, the cable moves ...
1
vote
1answer
45 views

Shimano XT with Campag Centaur crank?

I would like to use a Shimano XT group for my flat-bar disc-brake touring bike, but the XT crankset doesn't suit my touring needs very well. I would prefer having a 50/34 crank instead of the XT's ...
0
votes
2answers
329 views

Creaky crank problem: Campag 11sp Athena crankset (Ultra torque)

I have an awesome Ridley Noah carbon frame, fitted with Athena Campag 11sp groupo. Recently it's been making a lot of creaky and "pop" noises as I ride up hills (putting more force on the crank ...
1
vote
1answer
93 views

Campagnolo crank spider inter-compatibility between 'standard' and 'compact' chainrings

Will a Campagnolo Athena (2014) crank spider and crank arm from a 'standard' chainring setup of 39/53 accommodate 'compact' chainrings of 34/50, also Campagnolo Athena (2014)?
0
votes
2answers
169 views

Difference between 3 campy 80mm deep section wheels

Currently, three 80mm wheels are listed in Campagnolo's websites, but I can't fully see what's exactly the difference between them. BORA ULTRA 80 BULLET ULTRA 80MM BULLET 80MM I guess BULLET 80MM ...
0
votes
2answers
52 views

Changing '75 international to clip in pedals and shoes

I have developed foot issues because my stiff insoles don't do me much good on the bike, especially if I stand to go up hills. So I think I need to switch to clip ins with good stiff shoes (Bont ...
2
votes
1answer
493 views

Why is it important to keep bearing sets when greasing a campagnolo hub?

In almost all cases where hubs are regularly serviced, bearings don't need to be replaced. The general consensus though is to replace bearings after so many thousands of kms. Many posts on the web say ...
1
vote
1answer
156 views

Vintage Campagnolo hood

I'm looking for a Campagnolo hood like the one in the photos below. Will the newer ErgoPower hoods fit? If not, what should I do?
4
votes
3answers
2k views

Are Campagnolo and Shimano 11 speed chains interchangeable?

I have an Athena 11 speed group set, but can get a good deal on the Shimano 9000 chain. Does anyone know of any reports of issues combining the two?
4
votes
2answers
438 views

Chain drops in smallest gear under load

I'm baffled. I installed a new chain, cassette, cables and housing yesterday. On the stand, all is happy and shifting is silky smooth. On the road all seems happy except on the bigger cogs in back (in ...
2
votes
2answers
3k views

Can I swap a shimano free hub body for a campag one and be able to attach it to the existing Deore hub?

I want to convert my Surly Cross Check into a Campagnolo set up. The problem I am having is i have Shimano Deore Hubs on Mavic rims at present. I would rather not buy new wheels, so I am looking at ...
2
votes
2answers
348 views

Upgrading Bicycle Gearing

I have a Raliegh falcon touring frame, which I've been upgrading gradually as it's in good nick, putting modern componants on it. I've got to the point where the next thing I need to do is upgrade ...
1
vote
2answers
363 views

Campagnolo Athena 9 speed compatibility?

I own some NOS shifters, Campy Athena 9 speed, from 1998 i guess. do you guys know if I can use it with any campagnolo front/rear derailleur? how do I know what is compatible?
3
votes
1answer
456 views

Can i use a 10 speed hubbed wheel on my 7 speed/cassette bike?

I ride a 2005 Claud Butler San Remo with a Sora 7 cassette on the back. My back wheel has broke and is not repairable and I have bought an Ambrosio WS23 Wheel (700mm) with Bianchi hubs which I believe ...
6
votes
3answers
1k views

Campagnolo 11 speed crank with 10 speed running gear

I currently have an older 10 speed Campagnolo Record group set with 52/39 cranks. I would like to get a compact group set. I can't get an equivalent 10 speed compact cranks now but I can get an 11 ...
3
votes
4answers
1k views

Are frame changes needed to switch groupset from Shimano to Campagnolo?

I want change the groupset on my Scott Addict R2 from Shimano to Campagnolo. Is Campagnolo fully compatible or will I need to make frame changes?
0
votes
1answer
302 views

Right campagolo gears slipping

I have a set of Campagolo Athena 11 levels and the right one is slipping when changing down. What is the problem and which part do I need to replace, please
3
votes
2answers
959 views

Campagnolo QS Front Derailleur/Shifter Compatability

I have older Campagnolo Chorus 10-speed shifters. They are marked 'Carbon BB System'. I am replacing my front derailleur and have a spare 10-speed Record QS front derailleur. QS stands for Quick ...
3
votes
2answers
728 views

Is there a Campagnolo / Shimano compatibility issue for friction shift systems?

I know that for indexed systems, mixing campy and shimano parts is a no-no. Does the same hold for friction drive trains? The reason I ask is that I've never worked on campy parts before and I'm ...
2
votes
1answer
932 views

Convert 9 speeed Campagnolo Ergo Levers to 10 Speed

A friend gave me a carbon set of campag record 9 speed ergos. I would love to convert the 9 to 10 Speed and I understand it is possible. I have read that some dealers will do it but the cost is ...