A cluster of sprockets, commonly 5 to 11 of them, attached to a freehub on the rear wheel.

learn more… | top users | synonyms

15
votes
6answers
16k views

Why are higher-end freewheels so much louder when coasting?

I tend to ride relatively modest gear (Tiagra/Ultegra), but when I'm riding near higher-end bikes, I sometimes notice that the clicking sound that comes from their cassette/free-wheel while coasting ...
0
votes
2answers
20 views

Sora 9 Speed on Campagnolo Cassette

I have a wheelset with a Campagnolo cassette body. I want to run Sora 9-speed brifters with my wheelset. Will this work? I believe that it will because according to the information posted on ...
1
vote
3answers
78 views

Chain length and cassette tooth count relationship

A little context first: I'm going to be riding in the French Alps and plan to tackle some of the classic climbs (Alpe D'Huez, Galibier, etc) next month - I currently have a Campagnolo Athena 50/34 ...
0
votes
1answer
32 views

SRAM compatible 11 speed 12-25 cassette?

I'm looking for an 11 speed 12-25 cassette compatible with a SRAM drivetrain, however I don't think SRAM makes one. They list specs for their 11 speed cassettes as follows: 11-25: ...
1
vote
1answer
76 views

cold setting 3-speed road frame to 7 8 speed cassette

So my old road bike has a 3-speed freewheel, dropout spacing is about 114 mm. I'd like to give it an upgrade and put a 7 or 8 speed cassette (maybe stick with a freewheel if 6-7 speed, I just want ...
2
votes
2answers
6k views

7 speed to 8 or 9 speed cassette change

this is my first time here and i am new in the bike sport. I have a mtb for a month now and i usually use it for road trips with some dirt intervals. It has a 7 speed shimano cassette (14-34) and on ...
1
vote
2answers
78 views

What gears should I go for?

I have a Trek road bike (although you might call it a hybrid since it has straight handlebars. I do about 3,000 miles per year on it for general health reasons (up to 30 miles at a time and averaging ...
0
votes
2answers
3k views

Can I change my 7-speed rear derailleur to an 8-speed?

I bought a 2013 Cannondale Quick 6 Hybrid for my daily commute almost exactly a year ago, and I'm looking to give it some upgrades. It currently has a 7-speed Shimano Altus derailleur, and I was ...
3
votes
3answers
712 views

Replacing an 8-speed cassette with a 9-speed one to make my bike faster

I'd like to make my 8-speed tokyobike Classic Sport city bike go faster so I'm considering replacing the 8-speed cassette with a 9-speed one which can be found on the tokyobike Sport. The bike has ...
2
votes
2answers
83 views

Will two spacers between the cassette and the hub effect the chain line?

So I have a set of custom wheels (White Industries T11 hubs) and when the cassette is correctly fastened to the hub with the single spacer provided the cassette cogs can be moved in the direction ...
3
votes
1answer
44 views

Campagnolo Record C9 / Shimano CS-HG200-9 incompatibility

I drive cheap Shimano cassettes together with Campagnolo Record C9 chains. Yesterday I installed a new C9 and a CS-HG200-9. But the chain sort of slips over the sprockets, not unlike really worn ...
4
votes
2answers
437 views

Replace rear deraileur without breaking the chain

I currently have a Shimano Dura Ace 10 speed rear derailleur with a 12-25 cassette. For some hilly rides I'd like to change to a 12-30 cassette. The maximum the rear derailleur can handle is 28, so ...
4
votes
2answers
8k views

Advantages / disadvantages of freecoaster and cassette hubs

I've been reading a lot over the past few days about BMX, and last night I watched a few videos like this one. I have been seeing the words "freecoaster" and "cassette" around a lot, and I was curious ...
2
votes
1answer
147 views

Shimano 105 10 and 11 speed compatibility

currently i have on my bike the Shimano 105 system (2 years old) with 10 speed cassette. Currently i am buying a new wheelset (Fulcrum racing zero) made for shimano 11 cassette. I was told that i can ...
1
vote
2answers
448 views

How to recognise a 6-speed freewheel compatible hub?

I need to change the freewheel and the hub on my road bike and have been looking for a suitable replacement. I wish to keep my rim so I will rebuild the wheel. Also, I want to stay with a 6 speed ...
0
votes
1answer
58 views

Chain slipping in cassette when under load, could a different type of cassette work better?

This is my second modern bike and I got the same problem each time. The chain slips when under load (usually when I'm standing, but I can slip starting at a light and still sitting too). At first I ...
0
votes
1answer
65 views

Do I need to replace 10 speed chain if using a bigger cluster, also 10 speed?

Most similar questions are asking about using the same chain with a bigger cluster with more gears (10 speed chain vs 11 speed cluster). My concern is being able to simply buy a higher gear ratio ...
0
votes
1answer
63 views

Rear cassette 'ticking' forward, making chain catch, what is the problem and how do I solve it?

I have a Giant Rapid 4, bought in 2009. When freewheeling (i.e. rolling forward but not pedalling) on my bicycle, the chain catches. I had a look and I think this is because the rear cassette ...
2
votes
2answers
49 views

Chain wedging itself between cassette and gaurd

Ok, so, basically, the rear cassette on my bike is giving me a lot of problems, and I'm not exactly a professional cyclist who would know where to begin so I thought I'd ask here; The problem seems ...
1
vote
3answers
185 views

What causes frames to break at the (rear) dropouts?

The drive-side dropout and rear axle have broken twice. It's an old-style freewheel, not a freehub+cassette. (I weigh around 100kg, and ride a lot, and have been touring on hilly, gravel roads, with ...
1
vote
1answer
122 views

Should I switch to a 13-23T or 12-25T cassette?

I am currently riding a Fuji Sportif 1.5 with original configuration. I am not using clipless pedals currently. The bike come with 50/34T chainrings and a 9-speed 11-32T cassette. I noticed that most ...
5
votes
3answers
5k views

New Chain causing skipping on cassette - will this work itself out or is it unsafe?

I just installed a new chain on my 2002 Trek 2200 Road Bike. The old chain was a Shimano 9 speed that I installed 18 months and about 5000 miles ago. It had stretched modestly and was full of winter ...
1
vote
5answers
141 views

Giant Cypress Upgrade

I have very little knowledge when it comes to bicycles and how they work. With that being said, I have a Giant Cypress Hybrid. It is a great bike for the most part. I'm looking to get a little more ...
1
vote
3answers
125 views

Is the plastic piece between the seven gear sprocket and the spokes hard to replace, and how?

I was given a 21 gear mountain bike as payment for some work I did for a neighbor which had been in his backyard for about a year. Though it cleaned up very well there is one part I would love to ...
0
votes
2answers
70 views

I have a Schwinn Tempo which has a 6 speed freewheel

I'd like to replace my rear wheel because it isn't able to be fixed to be made true once again. The bike is an older Schwinn Tempo, the rear wheelset has a 6 speed freewheel. Or so that's what the guy ...
0
votes
3answers
120 views

Is my cassette or chain worn out?

I bought this road bike as my first road bike in 2011. I have not changed the chain or any parts on it since then and I bike on it almost daily. It's been running great, but sometimes I have trouble ...
0
votes
1answer
139 views

Can i fit a 6 speed wheel onto a 5 speed bike?

I have a 5-speed bike with a buckled back wheel. I have found one on the internet cheap, but it is a 6-speed wheel. Will it fit my bike? Will there be any adaptations needed to the bike to use this ...
4
votes
3answers
1k views

Best 9 speed cassette for fast & flat

I have a road bike with a 26/11 9 speed SRAM rear cassette. I cycle in Cambridgeshire on a daily basis and it's very flat. I find that I never use the hardest cog, leave the chainring on the biggest ...
0
votes
1answer
1k views

Changing cassette from 8 to 10 or 11 to meet the Shimano 105 5800 groupset

I upgraded following parts to Shimano 5800 (front and rear derailleurs, crankset, chain, STI shifters). The last thing left to replace is 8 speed Shimano CS-HG51 cassette. Unfortunately I cannot index ...
2
votes
3answers
1k views

Is 11- 34 rear cassette necessary?

I have a road bike with a compact crank and 11-25 rear cassette(9 rings) at the moment. And my local climb is 35k long with an incline between 10- 30%. I really struggle with it. I have to stop like ...
1
vote
2answers
2k views

Chain “vibrates” on higher gears

My freewheel that I have installed myself only 1.5 years ago has totally worn out by the moment and so I just had it replaced along with a chain at the workshop. I'm still concerned though about the ...
0
votes
1answer
96 views

Upgrading From Shimano 8 Sp Alivio To Shimano 9 Sp Altus

I have an old giant warp D's 2 bike that's about 10 years old. I've maintained it and it still rides good and looks just as good. I wanted to upgrade from the old alivio 8 speed drivetrain to either a ...
1
vote
2answers
411 views

Can a 7 speed Derailleur work on a 8 speed cassette

Can a 7 speed Derailleur work on a 8 speed cassette I have a extra 8 speed shifters? and a wheel that has a 8 speed cassette.
2
votes
4answers
4k views

How can I remove a stuck rear cassette?

I've been trying in vain to remove a rear cassette that I myself installed about a year ago. I may have over-tightened the lock ring and now I can't remove it no matter what position I hold the ...
0
votes
3answers
181 views

Can't remove lockring

Have been trying to get the lockring removed from my cassette so I can replace it with a spacer kit and one sprocket (singlespeed conversion). I managed to get it loose, although the wrong way - so ...
8
votes
3answers
3k views

What is the meaning of 11-32 cassette and 12-25 cassette?

I'am going to buy 2015 shimano 105 groupset and i have 2 options in choosing the cassette the first is 11-32 and the second is 12-25 and i don't know what is the meaning of each and which one would be ...
1
vote
1answer
82 views

If I use an 8 speed bar end shifter with the TT bar on my Allez, will I need to change any other parts of the drive chain?

My current bicycle is a 2013 Specialized Allez C2. It has an 8 speed rear cassette. I'd like to put in a TT handlebar. It's a given that I'll have to change the brake levers, as well as the shifters ...
1
vote
3answers
2k views

Replaced chain, bike makes grinding noise?

Recently, I started going to a community bike shop to learn how to maintain and service my own bike. Ever since I changed the old, worn-out chain to a new chain with a master link, I've been ...
1
vote
1answer
152 views

7 to 11 cassette upgrade or new bike

I've recently purchased a 1986 Schwinn Passage. Everything works great, but I'd like to upgrade to STI shifters and the Cassette. I've found a great deal on a groupset, Shimano 105 5800 11 Speed. My ...
5
votes
6answers
9k views

7-speed MTB cassette on 8/9-speed wheel hub, where does spacer go?

Sheldon Brown says "Add a 4.5 mm spacer before installing a 7-speed cassette on an 8-, 9-, or 10-speed hub", but doesn't seem to show spacer placement in any picture. My direct experience is that the ...
0
votes
1answer
874 views

KMC Z8S IG or HG compatibility

I have bought a KMC Z8S chain , but it slides over the rear cassette . The model of the cassette is Shimano CS-HG30-81 , it is not worn yet , and the chain length is also perfectly calculated . The ...
0
votes
2answers
412 views

Why does my chain slip off the chainring when cruising or back pedalling?

My bike is a little more then a year old (although I do put a lot of miles on it, about 12 miles a day), this problem seems to have started about a week ago. It's a 7 speed Avilon Next (a cheap brand ...
2
votes
1answer
567 views

youth racing. 11 speed 16 up cassette

I have been looking around and I cannot find anywhere that sells a cassette with a 16t top gear that is shimano 11 speed compatible. Junior racing requires gear limits and I was hoping to find ...
4
votes
3answers
15k views

Can I fit a cassette with a larger range with my Shimano Tiagra 10-speed ( GS-4600) derailleur?

I'm currently running a 2x10 shimano tiagra 10-speed drivetrain with a 50/34 compact crankset, a 12-30 rear cassette, and a Shimano Tiagra GS-4600 derailleur (that's medium cage aka road long cage) on ...
1
vote
3answers
283 views

I just replaced my cassette, do I need replace the 2 month old chain?

I replaced both my cassette and chain in July (2.5 months ago). For some reason my chain started skipping when I was in the smallest cog in back. I took it to a shop, they could not find anything ...
8
votes
2answers
7k views

What is the purpose of the plastic disk between the cassette and the rear wheel?

There's a plastic disc between the cassette and rear wheel on my bicycle. It doesn't seem to have any effect on the actual drivetrain; but I've seen it on a number of bicycles. What is it for?
6
votes
1answer
7k views

Upgrading wheels on a vintage Peugeot Frame

OK so I have a Peugeot Galibier bike that consists of a Reynolds 301 steel frame. A while back the original derailer gave up the ghost while riding, bending the rear-wheel spokes in the process. I ...
0
votes
1answer
769 views

How To Choose A Proper Sprocket Combination For A Road Bike Cassette?

I guess you have to have at least a couple of cassettes in your arsenal for different occasions. Can anyone please advise on how to choose a proper cassette depending on a trip. What can influence the ...
2
votes
1answer
224 views

New Chain and Cassette - If I am not racing does it matter?

I need to replace my chain and cassette and I am not sure what "level" I need to pick? I have SRAM RED and have never replaced my cassette or chain (Two years) I had brought my bike in for a tune up ...
1
vote
3answers
200 views

Suitable rear mech for Megarange cassettes

I just bought an 11-34T 8 speed rear cassette and noticed that it is a Megarange cassette with a substantially large jump between the lowest and 2nd gears. Will this work with my existing Alivio ...