A cluster of sprockets, commonly 5 to 11 of them, attached to a freehub on the rear wheel.

learn more… | top users | synonyms

1
vote
1answer
9k views

What Are the Widths of Shimano 8, 9, and 10 Speed Cassettes?

I was hoping that someone could provide me with the precise Shimano road-bike 8, 9, and 10 speed sizes for the following: Cassette Spacer Width Cog/Tooth Width Maximum Chain Width
8
votes
2answers
7k views

Is a 7 speed chainring compatible with an 8, 9 or 10 speed cassette and chain?

Currently I have a 7 speed cassette (13-23) running with a spacer on a new Tiagra hub. After I changed my chain, the wear has made two of the gears unusable. I am considering changing the cassette to ...
3
votes
1answer
932 views

smallest cog of cassette rubbing on seatstay

I built up a NOS late 90s steel frame with a similar era Campagnolo Chorus 9 speed groupset. Has gone well, except the stays/dropouts don't seem to quite like a 9 speed cassette. The second smallest ...
2
votes
1answer
705 views

Best Cassette Cog Material

I am replacing my smallest cassette cog for the 3rd time. I have been using Harris Cyclery's Aluminum Cog Crupi's Chromoly Cog is about 3 times as expensive. Is that still worth it? Can anyone ...
3
votes
1answer
936 views

Can a 10-speed chain be used with a 9-speed cassette?

I have an extra 10-speed chain I would like to use with a 9-speed cassette on my mountain bike. Will this combination work ok?
4
votes
2answers
8k views

Why the wobbly/loose cassette?

Why is my used Ultegra 10-sp cassette wobbly to the touch on a new Ambrosio hub? All spacers present/correct and 11-sprocket well-seated before torquing 40nM lockring. I tried another (used) 10-sp 11-...
4
votes
4answers
6k views

What cassete do I need to run with a compact crankset (50/36), to equal the same gearing as running a standard crankset (53/39) with a 11-28 cassete?

Every new bike in my price range comes with a compact crankset, which I want for climbing, but I race and I need to keep the same top speed that I've had for sprinting and descending (I live in the ...
4
votes
1answer
631 views

Can i use a 10 speed hubbed wheel on my 7 speed/cassette bike?

I ride a 2005 Claud Butler San Remo with a Sora 7 cassette on the back. My back wheel has broke and is not repairable and I have bought an Ambrosio WS23 Wheel (700mm) with Bianchi hubs which I believe ...
2
votes
1answer
559 views

Can I get a wheel dished without the bike?

I broke a spoke on my rear wheel, and ended up messing with it a bit too much - I may need to get it re-dished. If it's a common market model bike, can I simply take the wheel into my bike shop, ...
0
votes
2answers
4k views

I need help on how to make my bike faster [closed]

Hi Just wanted to ask how to make my bike faster. Do I change the front chainring to a larger one, if so do I have to get a whole new drive train or can I just get another shimano large ring. Can I ...
-1
votes
2answers
108 views

Freewheels frequency in 2012?

I would like to know for some future works on my bike whether I have a freewheel or a cassette? I will look at the bike in itself, but just for a little heads-up: my bike is a 2012 FX 7.2 (Trek). In ...
1
vote
1answer
210 views

Rear derailleur speed number interchangability

I have a bike with an 8-speed cassette and would like to switch to 9-speed cassette. Can I keep my rear derailleur? which is a Shimano Alivio one? I understand the indexing might mess up this, but I ...
3
votes
4answers
7k views

Replacing Crankset. Do I need to replace chain? Then do I need to replace cassette?

Over the past year, my road bike's crankset has gotten pretty bent up and out of wack. Not due to abuse, just wear and tear I guess. It's pretty bent and has a nice wobble that I can see as I look ...
3
votes
2answers
178 views

How to prevent ice from clogging the cassette?

I've commuted on a bike in winter for 13 years now, but never as far as now, that is 30 km daily. I have a problem which I never experienced before. In temperatures close to 0C and on paths covered ...
4
votes
1answer
760 views

Should cassette “wiggle”

Recently My freehub broke and so I removed the cassette to replace the freehub and noticed, whilst off the bike, 4 of the remaining bolted together 8 sprockets wiggled (4 wiggled together but ...
3
votes
2answers
127 views

Are derailluers always or usually compatible with any cassettes?

Is it OK to choose a derailleur without taking into consideration the cassette that will be used with it and vice-versa?
1
vote
1answer
2k views

Mixing 9-speed Tiagra and 9-speed Deore XT

I currently have a road bike with the following setup for the gears: 9-speed Tiagra front and rear derailleurs, Sora shifters, all from 2009: 30/39/52 Crankset 11-25 Cassette. I need some more low ...
5
votes
1answer
125 views

Can I replace a 9spd freehub with a 7spd one?

On my commute this morning I established that my freehub needs replacing. There's obviously something wrong with the ratchet mechanism, because it intermittently refuses to engage. My existing setup ...
7
votes
2answers
522 views

Switching to Lower Gears for Climbing

Right now, I've got a SRAM 11/26 cassette. I just moved to San Francisco, and some of the climbs out here (e.g., Mt. Tamalpais) are pretty brutal with over an hour of climbing. My cadence over some of ...
5
votes
2answers
977 views

Can you reverse the sprockets on a cassette to lengthen its lifespan?

I know my bike's rear cassette needs replacing, but before I do that, is it feasible to dismantle the 8 sprockets to reverse their spin? Can you increase the lifespan of a cassette by letting the cogs ...
3
votes
2answers
5k views

What do I need to know when replacing my cassette?

I'm looking to replace the cassette on my bike with a smaller version, as I find I'm only ever using the top ring of my chainring (except once recently during rain-ageddon). What do I need to know ...
1
vote
1answer
1k views

Is an Acera cassette compatible with an 8-speed Deore rear derailleur?

Is this Shimano Acera 8-speed cassette and chain compatible with a Shimano Deore 8-speed rear derailleur on my mountain bike?
3
votes
1answer
255 views

Am I going to do any damage by swapping cassettes frequently?

I've got a separate wheelset for cylocross riding and road riding. Would it be detrimental to the life of my cassette or hubs If I swapped the cassette between my road and off-road wheelset ...
3
votes
1answer
332 views

Should I have a spare cassette or a spare wheel?

I have a road bike that I use for triathlons as well as club rides in the evenings and on weekends. I don't have the bike in front of me, but the range of the cassette is on the low side. I'm more ...
12
votes
3answers
19k views

Do cassettes and chains need to be replaced at the same time?

Someone recently told me that if I replace my cassette I need to replace my chain (and vice versa) so that they wear evenly. Is this true? And, can anyone elaborate on the reasoning for this a bit ...
1
vote
2answers
16k views

Difference between Shimano HG51 8-Speed Cassette and Shimano HG50 8-Speed Cassette

Can anyone tell me the difference between Shimano HG51 and HG50 8-Speed Cassettes? I can't find any information online about this so was hoping someone might be able to help me. I am looking to ...
1
vote
3answers
2k views

Replace 7 speed 14-34 cassette

I want to replace my cassette which is 7 speed 14-34 shimano. The problem is I can't find exactly the same one. All I saw its 13-34 or 14-32 cassettes. So the question is: It is possible to replace my ...
1
vote
4answers
10k views

Rust on chain and cassette

It looks like rust on my chain and cassette. Both were new 5 months (4000 km) ago. The chain is about 60% worn/stretched. I've been riding 5 days/week, 40 km/day, Toronto on mild winter roads, and ...
1
vote
1answer
171 views

How is the quality of alloy sprocket 10 speed sprocket?

I saw at ebay, 10 speed cassette compatible with shimano, it's very light 103 grams, but the material is alloy with ceramic coated, it says, the cassette can be used up to 3000K, is it true? or may be ...
2
votes
1answer
907 views

Should I put grease under the lockring on my cassette?

I take my cassette off the bike to give it a good cleaning a few times a year and have always put a good amount of grease under the lockring. I am not talking about repacking the hubs, bearings or ...
3
votes
2answers
7k views

Options for replacing a 7 speed Shimano cassette / chain

I would like to replace my 7 speed HG70 cassette and chain. My problem is that it is increasingly difficult to find quality parts for 7 speed system. My bike is a Trek 970 from 1993, originally with ...
3
votes
3answers
3k views

Chain skipping on MTB

I've had my Trek 3900 for about a year now, and I replaced the chain about 3 months ago, but otherwise it's running with the same parts it came with (not counting tubes and tires). I had to replace ...
8
votes
2answers
8k views

if I replace chainset and chain should I replace back cassette as well?

I am replacing my chainset and chain, as its totaly worn and causing the chain to jump off when I pedal. The cassette is fairly worn too, but is not causing any problems. If I buy a new chain and ...
4
votes
1answer
504 views

Chainring and cassette compatible?

I've got a 20 year old Cannondale mountainbike (model # scratched off long ago). It's been used as a daily commuter for a few years and for a couple long trips. I've been told that the original ...
3
votes
1answer
612 views

Good 9-speed cog configuration for touring and which low-cost quality cassettes?

Alert: this cassette conf cannot be used in all touring locations because of poor support. I use it only in 1st world countries. The largest cog at the back is about 12-14cm. The length from hole-to-...
12
votes
1answer
1k views

Do I need to change my cassette if I can't see any wear?

I bought a new road bike with Campag Athena 11 speed in March last year. To the end of Jan it had covered 9000km. In all that time I hadn't changed the chain because I don't have the Campag tool, and ...
6
votes
4answers
9k views

How much distance can I put on drivetrain components?

I figure the jockey wheels on my derailer will last nearly forever, but what about the rest: cassette, chainrings, and chain? How many miles, kilometers, or furlongs do they normally last? I know ...