I am replacing my chainset and chain, as its totaly worn and causing the chain to jump off when I pedal. The cassette is fairly worn too, but is not causing any problems. If I buy a new chain and ...
Sheldon Brown says "Add a 4.5 mm spacer before installing a 7-speed cassette on an 8-, 9-, or 10-speed hub", but doesn't seem to show spacer placement in any picture. My direct experience is that the ...
I've got a 20 year old Cannondale mountainbike (model # scratched off long ago). It's been used as a daily commuter for a few years and for a couple long trips. I've been told that the original ...
Alert: this cassette conf cannot be used in all touring locations because of poor support. I use it only in 1st world countries. The largest cog at the back is about 12-14cm. The length from ...
I bought a new road bike with Campag Athena 11 speed in March last year. To the end of Jan it had covered 9000km. In all that time I hadn't changed the chain because I don't have the Campag tool, and ...
I figure the jockey wheels on my derailer will last nearly forever, but what about the rest: cassette, chainrings, and chain? How many miles, kilometers, or furlongs do they normally last? I know ...
My road bike currently has a 27/39/53 crankset and a 13-26 cassette, both of which need to be replaced. I occasionally find myself in both extremes—while heading up the very steep hills of the Bay ...