A cluster of sprockets, commonly 5 to 11 of them, attached to a freehub on the rear wheel.

learn more… | top users | synonyms

3
votes
4answers
78 views

Bike gears not shifting how they should

So I've not cycled in a while but my step dad was using my bike and he has a habbit of breaking stuff. I have since decided to start cycling to work again and I replaced various parts due to rust etc ...
2
votes
2answers
84 views

Larger cassette options on a compact set up?

I've been thinking of getting a larger cassette for my bike to tackle hills better, and I'm just looking for some thoughts. I have a 2011 Honky Tonk ...
-1
votes
1answer
51 views

Specific 10 speed chain models that work well on 9 speed Shimano rear drivetrains

I maintain several 9-speed (rear cassette) road bikes (Giant OCR 1/2/3, Tiagra and 105 from 2000-ish era) and one 10-speed rear cassette 105 road bike, made in 2007. I'm trying to find out if I can ...
2
votes
1answer
48 views

Can I use a Suntour Cyclone GT Rear Derailleur for a 10 speed Campagnolo cassette?

I'm building up a road bike and have a wheelset with a rear hub that has a Campagnolo Chorus 10 speed cassette. The front derailleur will be a triple and I'm looking into the possibility of using a ...
6
votes
4answers
224 views

What's the point in a freewheel/cassette with incrementally sized rings?

Pictured is a freewheel with 15, 16, 17, 18, 19, and 20 tooth sprockets. What I don't understand is why such small increments are worthwhile. Surely the point of having gears is the variance that they ...
4
votes
3answers
410 views

Best 9 speed cassette for fast & flat

I have a road bike with a 26/11 9 speed SRAM rear cassette. I cycle in Cambridgeshire on a daily basis and it's very flat. I find that I never use the hardest cog, leave the chainring on the biggest ...
0
votes
1answer
163 views

KMC Z8S IG or HG compatibility

I have bought a KMC Z8S chain , but it slides over the rear cassette . The model of the cassette is Shimano CS-HG30-81 , it is not worn yet , and the chain length is also perfectly calculated . The ...
1
vote
3answers
80 views

How to get a lower gearing

My trusty old CF racer was stolen the other day, and I'm looking for a replacement. I saw this bike at PlanetX and was intrigued. It's a full carbon bike with (last years) Ultegra components for a ...
4
votes
1answer
127 views

How can I tell if my bike has a freewheel or a cassette?

I bought a Frankenbike off Craigslist. It's a Specialized Rockhopper of unknown year, converted to a commuter, with shocks up front and V-brakes. I love this weird little bike and want to put a ...
0
votes
3answers
58 views

FSA Compact 50/34 Need better climbing

I have a FSA compact crank 50/34 with a 9-speed 12-27 cassette. I need better climbing ability for steep grades, not concerned with flat top speed. What should I do? What is the largest size cassette ...
1
vote
1answer
79 views

9 speed cassette and 7 speed shifter

So I bought a new (used) wheel set for my mountain bike and it came with a 9-speed cassette. I currently have 3x7 rapid shifters, which presents an incompatibility. I'm wondering how to fix this ...
3
votes
2answers
923 views

Mounting a 7-Speed Cassette on an 8/9 speed hub

I asked an earlier question regarding putting modern road wheels on my old steel frame. After clarifying a few things the main issue to me is the number of gears on the freehub. (The freehub I'm ...
5
votes
1answer
3k views

Upgrading wheels on a vintage Peugeot Frame

OK so I have a Peugeot Galibier bike that consists of a Reynolds 301 steel frame. A while back the original derailer gave up the ghost while riding, bending the rear-wheel spokes in the process. I ...
0
votes
1answer
51 views

Triple chainset to single chainset; BB compatability?

I'd like to upgrade the chainset on my GT Avalanche 1.0 2013 so I have no front mech or shifter and just one ring on the front; just 10 gears instead of 30. My current chainset is a Shimano M522 ...
1
vote
1answer
86 views

if you replace the front gear system do you need to replace both the rear casette and the rear derailuer or neither

I've been given an old bike from the road which has gears where you can't tell what gear the lever is in (there is no number) just a lever in one of three positions or seven for the back). I am ...
0
votes
1answer
93 views

What Changed with Shimano Hyperglide-C?

Shimano's HyperGlide-C (11-speed), are the hubs backwards compatible? Can I put an 8/9/10-speed cassette on a Hyperglide-C hub? Can I put a Hyperglide-C cassette on a Hyperglide hub?
0
votes
1answer
125 views

shimano 14-34t megarange casette not shifting to first gear

I bought a new deraluier and it wont shift to the first aka largest aka closest to the wheel / dropouts gear its about two inches too high. So it (the deraulier) knocks into the largest easiest cog. ...
2
votes
2answers
108 views

Direction of chain whip

Is there an easy way of working out which way round to apply a chain whip to a cassette for its removal? I've taken plenty of them off in my time but always end up having a couple of tries at it ...
4
votes
5answers
785 views

Transmission (cassette/crankset) considerations for 1st road bike purchase

I currently have a touring bike, with fenders, rack, panniers, and so on. I currently run a triple crankset 28/38/48 and 9sp 11-34 cassette. I mostly commute and tour with this bike. And with a fair ...
11
votes
5answers
19k views

How to tell when to replace cassette?

How do you tell when it's time to replace a cassette? Are there any specific wear patterns on the teeth to watch for or symptoms specific to a worn-out cassette?
5
votes
5answers
7k views

7-speed MTB cassette on 8/9-speed wheel hub, where does spacer go?

Sheldon Brown says "Add a 4.5 mm spacer before installing a 7-speed cassette on an 8-, 9-, or 10-speed hub", but doesn't seem to show spacer placement in any picture. My direct experience is that the ...
4
votes
2answers
1k views

Is it practical to replace two sprockets on a cassette?

My bike has 53/39T chainrings and a cassette with 12,13,14,15,17,19,21,23,25 sprockets, but I like to ride up steep mountain roads. Is it possible (without great expense) to replace two sprockets to ...
1
vote
1answer
68 views

7-speed cassette on an 11-speed freehub

Is it possible to use an SRAM cassette PG 730 7-speed cassette with a Mavic FTS-X freehub? According to the spec, no spacer is required for an 11-speed cassette and for 9/10 speed version a spacer is ...
0
votes
2answers
299 views

What do I need to know about fitting new wheels on a bike?

My girlfriend has had the wheels stolen from her bike. I'd like to replace them, but we're working with a limited budget so I'm going to do the work myself and source the parts second hand. I've done ...
1
vote
1answer
124 views

When I press on pedal, intermittent loss of power

Recently, when I cycled my bike the pedals would jump when I pushed down on them. I brought it to a shop who replaced the cassette, the chain, the two crank arms and probably the crankset. I have also ...
0
votes
2answers
82 views

Sliding chain over the cassette [duplicate]

Today I have replaced my chain with a kmc z8s. The rear cassette is Shimano acera 8 speed , and is not worn yet , so everything is OK with the cassette. But the problem is that the chain doesn't fit ...
8
votes
2answers
886 views

What is the purpose of the plastic disk between the cassette and the rear wheel?

There's a plastic disc between the cassette and rear wheel on my bicycle. It doesn't seem to have any effect on the actual drivetrain; but I've seen it on a number of bicycles. What is it for?
1
vote
1answer
99 views

Can I change the rear cassette on a folding bike?

I currently have a folding bike (think Dahon like) with 20" wheels and a front chainring of 52T and a rear cassette of 14-24T. Although 14 provides me with good speed I'd love to get faster speed for ...
5
votes
4answers
586 views

Can I increase my highest gear ratio?

I have a modern bike (ridgeback meteor '13) and It currently has a 21 speed shimano chainset. I find that going down hills (which I do a lot) and on flats I need a higher gear. Can I do anything to ...
1
vote
2answers
374 views

Why does the rear hub (cassette) moves on the axle when I pedal?

I am new to this website. I am also new to the terms, and names related to bicycle components. I have a bicycle called a Burner SuperCycle. I went to the repair shop twice in the last year because ...
2
votes
4answers
960 views

How can I remove a stuck rear cassette?

I've been trying in vain to remove a rear cassette that I myself installed about a year ago. I may have over-tightened the lock ring and now I can't remove it no matter what position I hold the ...
22
votes
11answers
29k views

Why would one ever buy a 12-25 cassette when an 11-25 is available?

I was looking at purchasing some Sram Rival components. Looking at the available cassettes, there is a big variety of sizes available: 11-23: 11-12-13-14-15-16-17-19-21-23 11-25: ...
3
votes
1answer
333 views

What is the widest range 9 speed cassette?

My commuter rig is an old trek mountain bike that I've converted to fixed gear with an ENO hub/crankset. I am thinking about going geared for the winter. I have a rear wheel that I built last year ...
1
vote
3answers
233 views

Chain really quite stretched, should I change cassette at the same time?

I measured my chain last night - 10 links were 25.8-25.9 cm. So I ordered a new one, tools and spare link pins (Shimano 8-speed HG). I'm thinking this amount of wear might explain why my least ...
1
vote
2answers
501 views

Upgrade my Rear Cassette from 12/25t to 11/28t

I have a Specialized Secteur 8-speed road bike with a Shimano HG850 12/25t rear cassette running on a KMX Z type narrow chain my crankset is a 52/42/30, I have done about 2,000 miles so it's probably ...
4
votes
2answers
192 views

Help with cassette, worn or not?

I have done exactly 2879 km on my cassette, and currently I got myself a new chain which is a third for this cassette. With first chain I made 1985km, but I already noticed a significant degradation ...
1
vote
1answer
74 views

Odd Sound Coming from my new Cassette

I had a new Shimano 105 cassette and chain put on my bike by bike shop. When I exceed 25 mph without pedaling, I get loud screeching sound (and feel some gripping), when I pedal it clearly goes away. ...
2
votes
1answer
152 views

Cube bike cassette wobble

Recently I have bought a used 2012 Cube CLS LTD PRO hybrid bike in a good condition . The only thing was the rear cassette a little wobbling. I asked a mechanic about this and he told that almost ...
9
votes
7answers
10k views

What range of sprockets is useful in a road bike cassette?

My road bike currently has a 27/39/53 crankset and a 13-26 cassette, both of which need to be replaced. I occasionally find myself in both extremes—while heading up the very steep hills of the Bay ...
1
vote
1answer
807 views

What Are the Widths of Shimano 8, 9, and 10 Speed Cassettes?

I was hoping that someone could provide me with the precise Shimano road-bike 8, 9, and 10 speed sizes for the following: Cassette Spacer Width Cog/Tooth Width Maximum Chain Width
6
votes
2answers
3k views

Is a 7 speed chainring compatible with an 8, 9 or 10 speed cassette and chain?

Currently I have a 7 speed cassette (13-23) running with a spacer on a new Tiagra hub. After I changed my chain, the wear has made two of the gears unusable. I am considering changing the cassette to ...
3
votes
1answer
309 views

smallest cog of cassette rubbing on seatstay

I built up a NOS late 90s steel frame with a similar era Campagnolo Chorus 9 speed groupset. Has gone well, except the stays/dropouts don't seem to quite like a 9 speed cassette. The second smallest ...
2
votes
1answer
235 views

Best Cassette Cog Material

I am replacing my smallest cassette cog for the 3rd time. I have been using Harris Cyclery's Aluminum Cog Crupi's Chromoly Cog is about 3 times as expensive. Is that still worth it? Can anyone ...
3
votes
1answer
422 views

Can a 10-speed chain be used with a 9-speed cassette?

I have an extra 10-speed chain I would like to use with a 9-speed cassette on my mountain bike. Will this combination work ok?
4
votes
2answers
763 views

Why the wobbly/loose cassette?

Why is my used Ultegra 10-sp cassette wobbly to the touch on a new Ambrosio hub? All spacers present/correct and 11-sprocket well-seated before torquing 40nM lockring. I tried another (used) 10-sp ...
3
votes
4answers
2k views

What cassete do I need to run with a compact crankset (50/36), to equal the same gearing as running a standard crankset (53/39) with a 11-28 cassete?

Every new bike in my price range comes with a compact crankset, which I want for climbing, but I race and I need to keep the same top speed that I've had for sprinting and descending (I live in the ...
3
votes
1answer
268 views

Can i use a 10 speed hubbed wheel on my 7 speed/cassette bike?

I ride a 2005 Claud Butler San Remo with a Sora 7 cassette on the back. My back wheel has broke and is not repairable and I have bought an Ambrosio WS23 Wheel (700mm) with Bianchi hubs which I believe ...
2
votes
1answer
183 views

Can I get a wheel dished without the bike?

I broke a spoke on my rear wheel, and ended up messing with it a bit too much - I may need to get it re-dished. If it's a common market model bike, can I simply take the wheel into my bike shop, ...
9
votes
2answers
5k views

Why are higher-end freewheels so much louder when coasting?

I tend to ride relatively modest gear (Tiagra/Ultegra), but when I'm riding near higher-end bikes, I sometimes notice that the clicking sound that comes from their cassette/free-wheel while coasting ...
1
vote
2answers
3k views

7 speed to 8 or 9 speed cassette change

this is my first time here and i am new in the bike sport. I have a mtb for a month now and i usually use it for road trips with some dirt intervals. It has a 7 speed shimano cassette (14-34) and on ...