1
vote
1answer
111 views

When I press on pedal, intermittent loss of power

Recently, when I cycled my bike the pedals would jump when I pushed down on them. I brought it to a shop who replaced the cassette, the chain, the two crank arms and probably the crankset. I have also ...
0
votes
1answer
51 views

KMC Z8S IG or HG compatibility

I have bought a KMC Z8S chain , but it slides over the rear cassette . The model of the cassette is Shimano CS-HG30-81 , it is not worn yet , and the chain length is also perfectly calculated . The ...
0
votes
2answers
66 views

Sliding chain over the cassette [duplicate]

Today I have replaced my chain with a kmc z8s. The rear cassette is Shimano acera 8 speed , and is not worn yet , so everything is OK with the cassette. But the problem is that the chain doesn't fit ...
1
vote
3answers
195 views

Chain really quite stretched, should I change cassette at the same time?

I measured my chain last night - 10 links were 25.8-25.9 cm. So I ordered a new one, tools and spare link pins (Shimano 8-speed HG). I'm thinking this amount of wear might explain why my least ...
4
votes
2answers
170 views

Help with cassette, worn or not?

I have done exactly 2879 km on my cassette, and currently I got myself a new chain which is a third for this cassette. With first chain I made 1985km, but I already noticed a significant degradation ...
1
vote
2answers
398 views

Upgrade my Rear Cassette from 12/25t to 11/28t

I have a Specialized Secteur 8-speed road bike with a Shimano HG850 12/25t rear cassette running on a KMX Z type narrow chain my crankset is a 52/42/30, I have done about 2,000 miles so it's probably ...
1
vote
1answer
426 views

What Are the Widths of Shimano 8, 9, and 10 Speed Cassettes?

I was hoping that someone could provide me with the precise Shimano road-bike 8, 9, and 10 speed sizes for the following: Cassette Spacer Width Cog/Tooth Width Maximum Chain Width
3
votes
1answer
359 views

Can a 10-speed chain be used with a 9-speed cassette?

I have an extra 10-speed chain I would like to use with a 9-speed cassette on my mountain bike. Will this combination work ok?
3
votes
1answer
226 views

smallest cog of cassette rubbing on seatstay

I built up a NOS late 90s steel frame with a similar era Campagnolo Chorus 9 speed groupset. Has gone well, except the stays/dropouts don't seem to quite like a 9 speed cassette. The second smallest ...
3
votes
2answers
1k views

New Chain causing skipping on cassette - will this work itself out or is it unsafe?

I just installed a new chain on my 2002 Trek 2200 Road Bike. The old chain was a Shimano 9 speed that I installed 18 months and about 5000 miles ago. It had stretched modestly and was full of winter ...
3
votes
4answers
2k views

Replacing Crankset. Do I need to replace chain? Then do I need to replace cassette?

Over the past year, my road bike's crankset has gotten pretty bent up and out of wack. Not due to abuse, just wear and tear I guess. It's pretty bent and has a nice wobble that I can see as I look ...
5
votes
1answer
2k views

Upgrading wheels on a vintage Peugeot Frame

OK so I have a Peugeot Galibier bike that consists of a Reynolds 301 steel frame. A while back the original derailer gave up the ghost while riding, bending the rear-wheel spokes in the process. I ...
4
votes
2answers
464 views

Can you reverse the sprockets on a cassette to lengthen its lifespan?

I know my bike's rear cassette needs replacing, but before I do that, is it feasible to dismantle the 8 sprockets to reverse their spin? Can you increase the lifespan of a cassette by letting the cogs ...
1
vote
1answer
544 views

Is an Acera cassette compatible with an 8-speed Deore rear derailleur?

Is this Shimano Acera 8-speed cassette and chain compatible with a Shimano Deore 8-speed rear derailleur on my mountain bike?
6
votes
2answers
2k views

Is a 7 speed chainring compatible with an 8, 9 or 10 speed cassette and chain?

Currently I have a 7 speed cassette (13-23) running with a spacer on a new Tiagra hub. After I changed my chain, the wear has made two of the gears unusable. I am considering changing the cassette to ...
3
votes
3answers
1k views

Why is my chain riding up and skipping teeth on the freewheel?

Due to a number of reasons, I would like to keep my freewheel at all costs (It's a Sachs freewheel, the bike has all sorts of more 'vintage' components, and they're hard to come by). From reading all ...
6
votes
3answers
8k views

Do cassettes and chains need to be replaced at the same time?

Someone recently told me that if I replace my cassette I need to replace my chain (and vice versa) so that they wear evenly. Is this true? And, can anyone elaborate on the reasoning for this a bit ...
1
vote
2answers
1k views

Cassette HG 51, which chain?

I need to replace my cassette (Shimano HG30 8speed 11-32) and chain (KMC Z7) that is currently on my bike (pinnacle Aura), however these parts are now discontiuned and I need to find the replacments. ...
0
votes
4answers
3k views

Rust on chain and cassette

It looks like rust on my chain and cassette. Both were new 5 months (4000 km) ago. The chain is about 60% worn/stretched. I've been riding 5 days/week, 40 km/day, Toronto on mild winter roads, and ...
1
vote
2answers
848 views

Chain “vibrates” on higher gears

My freewheel that I have installed myself only 1.5 years ago has totally worn out by the moment and so I just had it replaced along with a chain at the workshop. I'm still concerned though about the ...
3
votes
2answers
4k views

Options for replacing a 7 speed Shimano cassette / chain

I would like to replace my 7 speed HG70 cassette and chain. My problem is that it is increasingly difficult to find quality parts for 7 speed system. My bike is a Trek 970 from 1993, originally with ...
2
votes
3answers
2k views

Chain skipping on MTB

I've had my Trek 3900 for about a year now, and I replaced the chain about 3 months ago, but otherwise it's running with the same parts it came with (not counting tubes and tires). I had to replace ...
7
votes
2answers
6k views

if I replace chainset and chain should I replace back cassette as well?

I am replacing my chainset and chain, as its totaly worn and causing the chain to jump off when I pedal. The cassette is fairly worn too, but is not causing any problems. If I buy a new chain and ...
11
votes
1answer
907 views

Do I need to change my cassette if I can't see any wear?

I bought a new road bike with Campag Athena 11 speed in March last year. To the end of Jan it had covered 9000km. In all that time I hadn't changed the chain because I don't have the Campag tool, and ...
6
votes
4answers
3k views

How much distance can I put on drivetrain components?

I figure the jockey wheels on my derailer will last nearly forever, but what about the rest: cassette, chainrings, and chain? How many miles, kilometers, or furlongs do they normally last? I know ...