Repairing, maintaining, or replacing the chain on your bike that connects the front of the drivetrain (cranks, chainrings) to the back (cogs, cassette).

learn more… | top users | synonyms (1)

1
vote
1answer
349 views

Can you take apart rear derailleurs, and how do you put them back together again?

I recently took apart my rear derailleur as it was on a 10 year old bike and really old and stiff. So I thought I would unscrew both jockey wheels and clean them, they had a silver bit either side, ...
4
votes
1answer
286 views

Rotating 2 chains on one cassete

I clean my chain on the bicycle, mostly because taking it off for a bath, drying, etc seems to take more time than I have. But maybe I could use 2 chains in rotation, I would take one chain off, ...
5
votes
5answers
397 views

When to lube a chain?

Should a chain be lubed each time after riding in the rain*? What about a 100km mudride (occasional water up to the hubs)? Should I stop in the middle of the ride to re-lube the chain? If so, is it ...
1
vote
1answer
106 views

Did SRAM change/update their 10 speed PowerLink?

On a rare occurrence this weekend I managed to completely destroy my SRAM PowerLink. So I went over to my LBS and got a new one; however, when I went to install it, it was super hard to close the link ...
4
votes
1answer
500 views

What went wrong with my bottom bracket spindle length calculation?

Here's the facts: My bike frame requires a 70 mm Italian threaded bottom bracket I'm going to use a Nuvinci N360 IGH which requires a chainline of 49 (± 0.5) mm. I have Andel fluted cranks, which ...
1
vote
1answer
139 views

When I press on pedal, intermittent loss of power

Recently, when I cycled my bike the pedals would jump when I pushed down on them. I brought it to a shop who replaced the cassette, the chain, the two crank arms and probably the crankset. I have also ...
0
votes
1answer
441 views

KMC Z8S IG or HG compatibility

I have bought a KMC Z8S chain , but it slides over the rear cassette . The model of the cassette is Shimano CS-HG30-81 , it is not worn yet , and the chain length is also perfectly calculated . The ...
0
votes
2answers
99 views

Sliding chain over the cassette [duplicate]

Today I have replaced my chain with a kmc z8s. The rear cassette is Shimano acera 8 speed , and is not worn yet , so everything is OK with the cassette. But the problem is that the chain doesn't fit ...
5
votes
3answers
344 views

What happens when a bike has not had maintenance for a long time?

I recently traded my Kent BMX bike I got from Wal-Mart: for a Ross road bike ). My friend tells me the bike sat in his back yard collecting rust, I see it has rust on the chain, the gears, brake ...
2
votes
4answers
472 views

What should I look for when buying chain lube / lubricant?

In the past, I personally have only used WD-40. However, I have occasionally had my bicycle looked over at the locally run, free service sessions and most of the mechanics there use a hand applied ...
1
vote
1answer
109 views

converting to fixed gear, chain problem

I just got a 16 tooth and tried to put on the old chain, BUT while it fits on the pedal cog (46 tooth), it does not on the rear cog. How can I solve this? a different cog in the back or a different ...
0
votes
1answer
184 views

Alfine 11 chain guard

I'm planning to invest into a Alfine 11 set (both hub gear and crank+front cog(45)). I'm also looking for solution for chain guard for Alfine cog for commuting. I've found Curana brand that makes good ...
5
votes
1answer
220 views

Why do some people leave the chain sitting on the smaller sprocket when the bike is not used for a while?

I guess it is something related to the springs in the derailleur. But is it that important?
3
votes
2answers
735 views

Can you use Shimano 11 speed chain pins on a 10 speed chain?

I want to purchase a spare pin for my Shimano Ultegra 10 speed chain. Looking around I can only see 11 speed pins for sale. Can I put these into a 10 speed chain?
2
votes
2answers
195 views

Chain repeatedly tries to click into place without gear change

While pedalling, every 10 seconds or so, the chain on my bike makes the sound it makes during a gear shift - it "clicks", as if it's clicking into place in the new gear. But there is no gear shift ...
2
votes
3answers
455 views

Chain skipping on new freewheel and chain setup - What went wrong?

BACKGROUND NOTE: The bike is a 1992 Univega MTB that originally came with 6-speed SIS with a triple chainring. I removed the SIS shifter when it broke, and went with a friction shifter. The bike is ...
2
votes
2answers
129 views

Derailleur twitching in low gears

I had a mild spill today on my new bike, which put the (Tiagra) derailleur cage a little bit out of line. With some bending and eyeballing, I got the two jockey wheels lined up 'almost' perfectly ...
1
vote
3answers
294 views

Chain really quite stretched, should I change cassette at the same time?

I measured my chain last night - 10 links were 25.8-25.9 cm. So I ordered a new one, tools and spare link pins (Shimano 8-speed HG). I'm thinking this amount of wear might explain why my least ...
1
vote
2answers
265 views

slow bike…is it the chain?

I have two Specialized Langster (one brand new 2013 model (54 cm) and the other a couple of years old unique London model (52 cm)) - both are single speed. Got sick of getting punctures on my daily ...
3
votes
1answer
128 views

Decoding Chain Descriptions

When you see chains advertised, they are specifically noted to be for 11-speed or 10-speed bikes or something similar. Does this mean the they are for bikes with any front cog configuration but only ...
2
votes
2answers
169 views

Suitable remedy for chain damaged by bike shop

I've got a fairly old Dawes Discovery 301 (not sure of the year); earlier today I took it to a shop to have a replacement bottom bracket fitted. I rode it 2 miles home, and noticed a slight ...
6
votes
1answer
127 views

How are Prophete chains with built-in locks assembled?

I recently bought a 3/32" chain from Prophete, and despaired in the attempt to close it. The complex end of the chain looks like this: Now, at first thought, the slight groove (the one where you ...
3
votes
2answers
276 views

When going up hills, my gears drop 2 to 3 slots. Is this my cable tension?

I own an old bike, with the old style gear shifters (levers). I have been trying to get the cable tension right. However, it seems to be getting worse. Whenever I am on a slight incline or just in a ...
2
votes
1answer
125 views

How do I tell if a loose chain is because of the chain or the ring wearing?

My chain looks as though it's 'stretched' - by the time it's fed around the large front chainring it appears to be 'longer' than when on the other chainrings. Therefore I'm trying to work out whether ...
5
votes
2answers
224 views

Help with cassette, worn or not?

I have done exactly 2879 km on my cassette, and currently I got myself a new chain which is a third for this cassette. With first chain I made 1985km, but I already noticed a significant degradation ...
6
votes
7answers
2k views

Reusing SRAM 10 Speed PowerLock?

According to: http://www.sram.com/sram/road/technologies/powerlock "SRAM chain engineers developed PowerLock as a tool free, sure and consistent way to connect our 10 speed chains. While PL does ...
3
votes
1answer
261 views

What chain is this?

I have a Viking Torino 21 speed road bike. The bike has Shimano Sora derailleurs. The chain is in need of replacing but I don't know what chain to buy. Here is a photo I have taken of the current ...
2
votes
2answers
2k views

Can you use a SRAM 10-speed Powerlock with a Shimano chain/drivetrain?

I just bought a pair of SRAM Powerlocks for 10-speed chains. The packaging says that they can only be used with SRAM chains. Will anything nasty happen if I use it with a Shimano chain and cassette?
4
votes
1answer
923 views

Why is 2nd largest rear cog making clicking noise?

I have constant clicking noise from the 2nd largest rear cog on my cycle. It starts as soon as I shift into the 2nd gear either from 1st or 3rd gear. I have checked the following things - 1. Cable ...
3
votes
1answer
2k views

How to remove a Shimano Quick-Link?

I'm currently repurposing an old frame and replacing the drivetrain. If possible I'd keep the old 7 speed drive train the bike had together in case I ever find a use for it. The chain is an HG40 ...
1
vote
2answers
629 views

Upgrade my Rear Cassette from 12/25t to 11/28t

I have a Specialized Secteur 8-speed road bike with a Shimano HG850 12/25t rear cassette running on a KMX Z type narrow chain my crankset is a 52/42/30, I have done about 2,000 miles so it's probably ...
1
vote
1answer
2k views

What Are the Widths of Shimano 8, 9, and 10 Speed Cassettes?

I was hoping that someone could provide me with the precise Shimano road-bike 8, 9, and 10 speed sizes for the following: Cassette Spacer Width Cog/Tooth Width Maximum Chain Width
0
votes
1answer
218 views

Why are master links so expensive?

2.51 euro for a quick-link (the cheapest)? But this is not so different from just single chain link. Why such prices and not for a dime?
2
votes
1answer
95 views

when does a 1/8" chain need replacing?

I use a Park Tool device to check for stretch on my derailleured bikes - can the same tool be usefully deployed on a 1/8" 'track' chain, does anyone know? If not, how then to check for wear?
3
votes
1answer
587 views

Can a 10-speed chain be used with a 9-speed cassette?

I have an extra 10-speed chain I would like to use with a 9-speed cassette on my mountain bike. Will this combination work ok?
-1
votes
1answer
313 views

Upgrades/Repairs Mongoose XR-150 [closed]

First time posting here for bikes. I have an old wally world free xr-150. It was my favorite bike as a kid when it was all about fun. It's been sitting around for many years. No real rust or tarnish. ...
0
votes
0answers
93 views

How can I prevent “chain suck”? [duplicate]

I know what the above is: when your chain bunches when you change gears & the bunch runs through the front derailleur and wrenches it. This damage is pretty much irreparable, and has cost me far ...
1
vote
3answers
2k views

Clicking noise from crankset

A month ago I bought a Scott Aspect 60, and for about a week everything was ok. Then, I started hearing a noise coming from the crankset. First thought was that it was the front derailleur - after ...
1
vote
1answer
240 views

First time buying parts ( derailleur, chain, rear axel, shifters) need help!

I have a 21 speed (3 front, 7 rear) NEXT bicycle ( model number 8568-49, year 2007.12.06) sitting in my back yard at the moment a few missing parts and I was hoping to get some help on what to get and ...
4
votes
2answers
579 views

Why does the chain tension vary as pedals are turned?

I have a new single-speed bike (after purchase this year, it was unused in a garage for a few months), but as I turn the pedals, the tension in the chain varies noticeably. What should I check, ...
1
vote
1answer
365 views

Why does the chain misalign in the lower pulley when shifting to the small front cog?

Almost every time I go from the big, to the small, front cog on my SRAM Red 2011 (with a KMC chain), the chain ends in the lower pulley position, as shown in the photo. Why?
1
vote
1answer
152 views

No more chainguide from Sram?

I remember I saw somewhere new Sram system that does not require chainguide. Don't remember the model, but could you please tell me more about it? How does it work?
3
votes
7answers
2k views

What are the benefits of nickel-plated chains?

Bicycle chains with higher model numbers (and slightly higher prices) are often nickel-plated or half-nickel-plated. What are the benefits of nickel-plated chains over non-nickel-plated chains? How ...
3
votes
1answer
425 views

smallest cog of cassette rubbing on seatstay

I built up a NOS late 90s steel frame with a similar era Campagnolo Chorus 9 speed groupset. Has gone well, except the stays/dropouts don't seem to quite like a 9 speed cassette. The second smallest ...
1
vote
1answer
172 views

Campagnolo master link won't fit

I bought a Campagnolo master link (this one) for use with my Campy 10 speed chain. When it's not on a chain, it joins up and clicks into place and all is well. However, when I try to fit it around ...
0
votes
1answer
96 views

Chain doing noises… what to do?

I have a city bike with a 3 gear hub on the back. From some time now, from time to time I hear (I think) the chain clicking/cracking (noise) specially when going up a ramp. Initially I though it was ...
4
votes
2answers
719 views

Reusable gloves for bike repairs?

I'm looking to degrease/lube the chain, adjust disc brakes, clean, etc. at home, but don't want to get my hands dirty. (Zinger alert.) Are there any special re-usable gloves for this kind of bike ...
1
vote
2answers
202 views

What could be the reason for chain skipping

My chain is skipping only on the smallest sprocket, and it skips with every crank turn. The chain is not stretched. Also, chainrings are almost new. Could this freewheel be the reason, it doesn't seem ...
2
votes
1answer
109 views

how to fix gear ring that over-jumps

I am pretty new here, and I am not acknowledged with the bicycle terminology in English, so this topic might be a duplicate. Sorry in advance. So, when I put more pressure while pedaling, the chain ...
5
votes
1answer
179 views

I shortened my chain, is this bad?

H, I'm pretty new to bike maintenance. This weekend I tried breaking my chain to clean it. This went well up until I accidentally popped the chain pin out and as a result had to remove a link. This ...