Repairing, maintaining, or replacing the chain on your bike that connects the front of the drivetrain (cranks, chainrings) to the back (cogs, cassette).

learn more… | top users | synonyms (1)

2
votes
1answer
109 views

how to fix gear ring that over-jumps

I am pretty new here, and I am not acknowledged with the bicycle terminology in English, so this topic might be a duplicate. Sorry in advance. So, when I put more pressure while pedaling, the chain ...
5
votes
1answer
181 views

I shortened my chain, is this bad?

H, I'm pretty new to bike maintenance. This weekend I tried breaking my chain to clean it. This went well up until I accidentally popped the chain pin out and as a result had to remove a link. This ...
2
votes
2answers
436 views

Can I use a SRAM PC850 chain on a 6-speed bike?

I want to buy a chain for a 6-speed bike. I know SRAM chains have the special link, meaning that no tools are needed. I've seen a very good deal on the SRAM PC850 chain, but their website lists this ...
3
votes
1answer
449 views

Should I remove the chain before installing new rear derailleur?

I want to put a new Sram X7 instead of killed one, should I open the chain (if I have no chain lock) or it's better to open the derailleur?
4
votes
1answer
2k views

Formula to calculate Single Speed Chain Length from Chainring Size, Cog Size, and Chainstay Length

I've seen formulas to calculate chain length for multi-speed bikes, but I need something for single speed. Example: 42T Chainring 17T Cog 406mm (16") Chainstay Length The answer in this case should ...
1
vote
1answer
96 views

Is it ok to use a 9spd link on a 10spd chain?

I accidentally broke the master link (a.k.a reusable missing link) on my 10psd KNC x-10 chain. Since I only had a SRAM 9spd replacement link, i used that to connect the chain. I rode 30 Km without any ...
3
votes
2answers
2k views

Can a 10-speed mountain bike chain be used on a 10-speed road bike?

I would like to use a Shimano Deore XT Chain CN-HG94 on my road bike. Are there any differences between roadbike chains versus mountain bike chains that prohibit this? Sample Road Bike Chains: Dura ...
1
vote
1answer
655 views

Chain guards for front derailleurs: Metal alternative to SKS chainboard?

Can anyone recommend an aftermarket, front-derailleur-compatible chainguard (along the lines of the SKS chainboard) that's not made of plastic? Maybe something like the one on the Marin Bridgeway ...
3
votes
5answers
1k views

Are single-speed bikes better equipped to handle cog/chain wear?

I need to decide between a single-speed and multiple-speed bike. I usually ride multiple-speed mountain/city bikes in the highest gear anyway (around town). They're not intended for that, and doing ...
2
votes
1answer
435 views

Are these chainrings the reason my chain skips/hops?

When I ride my bike normally, then chain skips like crazy. I know it skips in the front because I stuck some paper in the chain to see if it moved and it didn't. Chainrings:
-2
votes
2answers
502 views

Why does chain slip when I move my pedals?

Why does chain slip when I move my pedals? How do I fix it? Here is a clip: ...
7
votes
5answers
266 views

I live in a place where it frequently floods. How can I keep my chain from rusting?

My poor bike's chain lasted all of three months before it gave in to the winter floods where I live. Storing it indoors is not an option, and despite my maintenance efforts, the knee-deep floods that ...
1
vote
1answer
104 views

Question about chain re-attaching

I have a question about chain "closing" (not sure of the english word, but you get it, right?). I know how to open a chain with a chain tool, and I know I must not "go too far" as to remove the rivet ...
0
votes
1answer
317 views

Shimano Ultegra chaninrings on Truvativ Elita Tandem crank

I'm attempting to replace the chainrings on my Cannondale Road tandem. The crankset is a Truvativ Elita Tandem (52-39 10 speed big/middle ring). The new rings are Shimano 6603 52-39 rings. I swapped ...
8
votes
3answers
12k views

What cleaner and oil should I use on my bike chain

Hope everyone is well. I need to clean and oil my chain as its getting a little clunky when I’m changing gears. I have no idea what I should be cleaning it with and then what I should oil with. Any ...
4
votes
1answer
605 views

What to do about a stuck chain link on 10 speed chain

I put a new chain on my bike and after 3 rides or so, I developed a stiff link. I'm not sure what caused the issue, but now it barely bends at the pin at all, unless forced. It causes skipping ...
1
vote
2answers
860 views

10-speed chain too short, can I add links?

I purchased a new KMC DX10SC 10-speed 114 link chain to replace my worn out chain. I'm running a mountain triple and it seems that The chain is slightly too short at it's full length. I can't get in ...
5
votes
2answers
3k views

New Chain causing skipping on cassette - will this work itself out or is it unsafe?

I just installed a new chain on my 2002 Trek 2200 Road Bike. The old chain was a Shimano 9 speed that I installed 18 months and about 5000 miles ago. It had stretched modestly and was full of winter ...
5
votes
1answer
345 views

Can I flip my worn chain to extend it's life?

Assuming my chain is showing that it's worn and getting close to needing replacement due to chain 'stretch'. I know you can flip single speed chainrings to extend their life when they become worn. Can ...
3
votes
4answers
4k views

Replacing Crankset. Do I need to replace chain? Then do I need to replace cassette?

Over the past year, my road bike's crankset has gotten pretty bent up and out of wack. Not due to abuse, just wear and tear I guess. It's pretty bent and has a nice wobble that I can see as I look ...
4
votes
3answers
445 views

Cold weather chain lube?

My Rock N Roll Gold bike lube seems to get solid or gelatenous when stored on my unheated, but enclosed porch at colder temperatures. Is a chain lubricated with this product still going to be ...
6
votes
3answers
4k views

Apart from the size, is there any difference between chains for derailleurs or for single-speed / internally geared hubs?

I might need to replace my bicycle chain (see this question). The store where I've bought components before (cyclecomponents.com) seems to be entirely marketed to derailleurs, and I have an internally ...
4
votes
3answers
658 views

Shorten or replace bicycle chain?

The chain on my internally geared hub bicycle is now too long even when the rear wheel is entirely pulled back. How do I tell whether it's sufficient to shorten the chain by removing some links, or if ...
2
votes
4answers
497 views

Chain replaced but bottom jockey wheel “jumps”?

I have a 10speed MTB and replace the chain using a powerlink. Now the bottom pulley wheel makes like a jumping kind of movement. It is not smooth. Also when in my small ring in front I get chain ...
3
votes
4answers
306 views

Will an 1/8' chain and cogs wear slower than 3/32' chain and cogs for single speed / fixed gear setup?

Will an 1/8" chain and cogs wear slower than 3/32" chain and cogs for single speed / fixed gear setup? What about using an 1/8' chain mismatched on 3/32" chainring and cogs?
4
votes
2answers
2k views

My chain appears to be squeaking when I ride it forward but not backwards

At first I thought I just needed to lubricate my chain, so I degreased it and just re-lubed it very thoroughly. It's still squeaking. I thought it could maybe be a derailleur pulley issue, but I ...
3
votes
1answer
213 views

Checking fixie for damage

This morning during my morning commute I had an unintended lesson in fixie skidding: I dropped the chain, it got stuck between the cog and the hub and locked the wheel. I'm not sure where that skill ...
2
votes
2answers
188 views

Had the front derailleur adjusted, now it feels like the rear is skipping

Here is the short version. I'm all for adding more once I know what that more is to help answer said question. I work on the road. I take my Felt ZW75 ...
1
vote
2answers
201 views

Snapping master links

I have a 3x9 gearing installed and I've noticed that the chain broke, by failure of master link, twice within 25 km. Interestingly, the failure was perpendicular to the direction of motion: What am I ...
6
votes
1answer
4k views

Upgrading wheels on a vintage Peugeot Frame

OK so I have a Peugeot Galibier bike that consists of a Reynolds 301 steel frame. A while back the original derailer gave up the ghost while riding, bending the rear-wheel spokes in the process. I ...
4
votes
1answer
1k views

How to mount SRAM snaplock?

I am trying to join PC-1 SRAM chain, it has such snaplock: And the problem is, the distance between holes is slightly less (IMHO) than distance between the pins. Every hole on its own fits any pin, ...
2
votes
2answers
2k views

my chain is skipping on my single speed

The chain keeps wanting to load towards the right hand side of the cog no matter how I orientate the chain. This causes painful skipping. Do the marks have anything to do with it? I have a ...
12
votes
4answers
751 views

Minimal effort chain cleaning

One of the main reasons I eventually give up my bicycle commute in winter is that keeping my bike -mainly the drivetrain- clean despite all the rain/dirt/salt/hail/snow becomes too much of a time ...
9
votes
5answers
1k views

Do I need a new chain after 1300 miles?

I have a Boardman Airpro and probably need a new chain having done about 1,300 miles with it. The bike is used for leisure and commuting and therefore goes through all weathers. I also keep the ...
5
votes
2answers
4k views

Upgrade Shimano from 9- to 10- speed

I'm thinking of upgrading the 9-speed Tiagra rear mech on one of my (road) bikes to something, still Shimano, but 10-speed. The obvious replacements I'll need are cassette, right-shifter and chain. ...
2
votes
2answers
900 views

How to break reinforced Shimano pin?

Sorry if my technical English is a bit imprecise. I just put on new Shimano CN-HG53 chain. I joined the ends not with regular pin, but with provided reinforced one (like one of those below). The ...
0
votes
1answer
75 views

Can i use a thinner standard mtb chain (SRAM 971) or does the chain need to be specific (SRAM PC-1) for coaster brake single speed

Time for a replacement chain, and i have a sram 971 sitting around, don't want to spend the money on a new chain, if i can get away with using a mountain bike chain. Hopefully it won't pop off with ...
3
votes
2answers
499 views

What is causing noise/vibration high power input on right hand (drive side) crank?

I am getting a repetitive grinding sound/slight vibration while fully mashing on my Kona-humu single speed. Description of Problem This grinding is more similar to what you would hear from an ...
2
votes
2answers
5k views

How do I figure out which size chain my fixed gear bike has

My fixed gear bike is going to want a new chain soon, how do I figure out which width I should use?
2
votes
1answer
472 views

stiff gears and chain coming off while pedalling forward (hub gear)

So I recently replaced the back wheel's tyre on my bike. Got it all fitted back on again, and the chain and everything are in place as they should be. However, changing up gears has become very stiff ...
4
votes
4answers
325 views

Chain slipping off a non geared bike

I have a normal ranger bike without gears, I've had this bike for quite a while now, been 8 years. But recently it's chain has started slipping off. I have maintained it well, changed the chain a ...
0
votes
2answers
2k views

Rear wheel stuck (not moving)

I have a Mongoose XR-150. Just brought it from Craigslist a month ago. Suddenly while biking today, the rear wheel got jammed. It just stopped moving, however hard I tried to pedal. Immediately ...
4
votes
4answers
2k views

Chain skipping on some gears

I have an old cruising bike with 21 gears. A few months ago I was pedalling back home when my chain broke, and I was only able to get the chain replaced this week. After having it replaced I noticed ...
4
votes
3answers
2k views

Is a self cleaning lube enough for chain maintenance?

I've been trying to figure out what I should use when cleaning my bicycle chain. When I first purchased my bike, I knew I needed to lube my chain when i did regular maintenance. I purchased some ...
4
votes
2answers
2k views

how do you make a chain longer with a simple chain breaker?

I was replacing a chain and managed to cut the chain too short. Is it possible to make the chain longer using a simple chain breaker? If so, how?
4
votes
1answer
1k views

Why does my chain keep jumping off the front chainring on my 1x9?

My chain has a tendency to frequently jump off the front chainring. I have a 1x9 so it's not a front derailleur issue. It generally happens when I hit something like the lip of a driveway or sidewalk ...
-1
votes
2answers
239 views

the derailer is touching chain and it won't let me go past 14 speed supposed to go 21 speeds

The derailer on my 21-speed bike looks like it's bent. It won't let the chain go onto the 3rd ring of the front derailer so, no I can't shift past the 14th speed. If I try it makes a loud sound, like ...
4
votes
2answers
598 views

Can you reverse the sprockets on a cassette to lengthen its lifespan?

I know my bike's rear cassette needs replacing, but before I do that, is it feasible to dismantle the 8 sprockets to reverse their spin? Can you increase the lifespan of a cassette by letting the cogs ...
2
votes
4answers
270 views

What is causing phantom shifting on front chainring?

I have a steel cyclocross bike which doubles as my weekend bike and my daily commuter. About a month ago I got in a wreck and bent the rear derailleur hanger and the rear derailleur. Got the hanger ...
4
votes
3answers
3k views

Replacing the front derailleur: unlink the chain?

If I want to replace the front derailleur on an already set up bicycle (replace SRAM Apex with SRAM Force), do I have to unlink and relink the chain on order to thread it through the FD cage? Or can I ...