Repairing, maintaining, or replacing the chain on your bike that connects the front of the drivetrain (cranks, chainrings) to the back (cogs, cassette).

learn more… | top users | synonyms (1)

4
votes
4answers
384 views

Chain slipping off a non geared bike

I have a normal ranger bike without gears, I've had this bike for quite a while now, been 8 years. But recently it's chain has started slipping off. I have maintained it well, changed the chain a ...
0
votes
2answers
4k views

Rear wheel stuck (not moving)

I have a Mongoose XR-150. Just brought it from Craigslist a month ago. Suddenly while biking today, the rear wheel got jammed. It just stopped moving, however hard I tried to pedal. Immediately ...
5
votes
4answers
3k views

Chain skipping on some gears

I have an old cruising bike with 21 gears. A few months ago I was pedalling back home when my chain broke, and I was only able to get the chain replaced this week. After having it replaced I noticed ...
4
votes
3answers
2k views

Is a self cleaning lube enough for chain maintenance?

I've been trying to figure out what I should use when cleaning my bicycle chain. When I first purchased my bike, I knew I needed to lube my chain when i did regular maintenance. I purchased some ...
4
votes
2answers
3k views

how do you make a chain longer with a simple chain breaker?

I was replacing a chain and managed to cut the chain too short. Is it possible to make the chain longer using a simple chain breaker? If so, how?
4
votes
1answer
2k views

Why does my chain keep jumping off the front chainring on my 1x9?

My chain has a tendency to frequently jump off the front chainring. I have a 1x9 so it's not a front derailleur issue. It generally happens when I hit something like the lip of a driveway or sidewalk ...
-1
votes
2answers
256 views

the derailer is touching chain and it won't let me go past 14 speed supposed to go 21 speeds

The derailer on my 21-speed bike looks like it's bent. It won't let the chain go onto the 3rd ring of the front derailer so, no I can't shift past the 14th speed. If I try it makes a loud sound, like ...
4
votes
2answers
730 views

Can you reverse the sprockets on a cassette to lengthen its lifespan?

I know my bike's rear cassette needs replacing, but before I do that, is it feasible to dismantle the 8 sprockets to reverse their spin? Can you increase the lifespan of a cassette by letting the cogs ...
2
votes
4answers
298 views

What is causing phantom shifting on front chainring?

I have a steel cyclocross bike which doubles as my weekend bike and my daily commuter. About a month ago I got in a wreck and bent the rear derailleur hanger and the rear derailleur. Got the hanger ...
4
votes
3answers
3k views

Replacing the front derailleur: unlink the chain?

If I want to replace the front derailleur on an already set up bicycle (replace SRAM Apex with SRAM Force), do I have to unlink and relink the chain on order to thread it through the FD cage? Or can I ...
14
votes
3answers
26k views

Help Me Understand My Bicycle's Gears

I've recently started commuting with a bicycle (Giant hybrid bicycle). I've been trying to learn a little about bicycling to make my commute easier and my time on the bicycle more enjoyable. Please ...
1
vote
1answer
705 views

Need help choosing compatible rear derailleur, cassette & chain

I just "inherited" a bike that has no rear derailleur or chain. It also looks like the cassette is pretty worn, so I'm thinking about replacing that too. I've looked around on the forum and I think ...
1
vote
1answer
989 views

Is an Acera cassette compatible with an 8-speed Deore rear derailleur?

Is this Shimano Acera 8-speed cassette and chain compatible with a Shimano Deore 8-speed rear derailleur on my mountain bike?
0
votes
2answers
220 views

Unable to change from 14th to 7th

I've got a bike that I have had for about 8 weeks and it has already been back to be serviced twice. It's just returned from the second service and I've noticed that it is not shifting from 14th to ...
-1
votes
1answer
210 views

Chain fell out of rear derailleur when wheel off.

I took my rear wheel off to fix a flat and hung the bike up by its front wheel to store. when I returned to put the tire back on the chain had slipped totally out of the rear derailleur, caged jockey ...
7
votes
2answers
5k views

Is a 7 speed chainring compatible with an 8, 9 or 10 speed cassette and chain?

Currently I have a 7 speed cassette (13-23) running with a spacer on a new Tiagra hub. After I changed my chain, the wear has made two of the gears unusable. I am considering changing the cassette to ...
4
votes
4answers
2k views

Should I use a master link?

I just ordered a new KMC X10SL Ti 10 Speed chain for my bike. And I am wondering if I should use a master link or not. In the past I have had much trouble with them. I used to use them on my 9 ...
5
votes
3answers
11k views

How to tell what length of chain to get?

I am replacing the chain on my road bike soon. How do I know how many links to get? Does it have to exactly 114 or 116. Or is it not a big deal? I ordered a 116 link chain. Will I need to shorten ...
1
vote
1answer
2k views

Using a new chain on worn out sprocket?

I went to REI yesterday because my bottom bracket was creaking. I brought my bike with me so I could get the right tools to take it off, but while I was there the mechanic actually took the ...
1
vote
4answers
4k views

Can I use gear oil on my chain?

I don't have any chain oil right now, but I have some gear oil left over from working on my car. Would it be an effective chain lubricant? It's listed as 80W90, but reading the Wikipedia article ...
12
votes
1answer
1k views

How bad is cross chaining?

Accepted wisdom is that is bad and that we should never do it. However, most of us set up our bikes so that we can run any gear combination. Invariably, I'll occasionally look down and see that I'm ...
3
votes
3answers
2k views

Why is my chain riding up and skipping teeth on the freewheel?

Due to a number of reasons, I would like to keep my freewheel at all costs (It's a Sachs freewheel, the bike has all sorts of more 'vintage' components, and they're hard to come by). From reading all ...
7
votes
2answers
6k views

Are there any disadvantages to running a stainless steel bike chain?

We are currently using KMC Z51RB rust resistant chains on our bikes, a competitor has started to use stainless steel chains. Does anyone know the advantages and disadvantages of using stainless steel ...
2
votes
2answers
143 views

Is there any reason to keep original drive-train components together until they can all be replaced?

I broke the master link in my chain a while ago and my LSB told me it was because I wasn't cleaning/lubricating my chain often enough. The chain had experienced more wear than it should have as a ...
5
votes
2answers
374 views

Is the Power-Link designed for routine usage?

I have a Power-Link which i intended to use in emergencies (when the chain breaks and i'm far from home). Used it once, worked pretty well. Now i wonder, what if i use it permanently with my chain? ...
10
votes
3answers
15k views

Do cassettes and chains need to be replaced at the same time?

Someone recently told me that if I replace my cassette I need to replace my chain (and vice versa) so that they wear evenly. Is this true? And, can anyone elaborate on the reasoning for this a bit ...
0
votes
0answers
40 views

What sort of bike chain do I need for my bike? [duplicate]

Possible Duplicate: How can I tell which size chain my bike uses? I have a vintage Ross road bike, and the chain recently snapped during one of my rides. The bike has 2 gears in the front ...
0
votes
1answer
315 views

How to Get Starter Pins

I'm not sure if 'starter pin' is the correct terminology. When you buy a new chain, that doesn't have a master link, you get a longer pin that allows you to put the chain together. Then you simply ...
0
votes
1answer
447 views

Clicking gears on new Electra Townie 8i

I asked a similar question related to slipping gears here: Slipping gears on new Electra Townie 8i but now I no longer get slipping, but clicking noise when the pedals are rotated either forward ...
10
votes
2answers
10k views

Chain slipping off derailleur jockey (need suggestions ASAP)

Last week, I had to abandon a training ride due to my chain slipping off my rear derailleur jockey wheel. This would only happen when shifting, and most often when either shifting chainrings or ...
4
votes
3answers
1k views

Why are 10 speed chains so expensive?

I've noticed that 10-speed chains cost 2.5 times as much as their 9 speed counterparts. Is this just because there isn't much demand for these, so the manufacturers can justify the ridiculous expense? ...
1
vote
1answer
95 views

Can I use this chainlink?

I bought this SRAM PC1091 chain for my compact chainset and have been running it since January. In order for the chain to fit properly I cut a few links from it. I am now getting a standard chainset, ...
4
votes
1answer
2k views

What would be the “definitive” formula to calculate chainstay length from sprocket size, chainring size and number of chain links?

Before I started to write this answer, I thoroughly read this question, its answers and comments: How do I calculate the diameter of a chainring from the number of teeth? So, my question tries to ...
2
votes
1answer
992 views

Better 7-speed chain for Trek Allant?

Bought a Trek Allant for cycling to work (ca 10 miles). Now, after exact 512 miles the chain is worn out and starts damaging the cassette and chainset. Cheap crap material! Is there anything out there ...
1
vote
2answers
3k views

Cassette HG 51, which chain?

I need to replace my cassette (Shimano HG30 8speed 11-32) and chain (KMC Z7) that is currently on my bike (pinnacle Aura), however these parts are now discontiuned and I need to find the replacments. ...
1
vote
4answers
3k views

Alternative Chain Grease/Lube

Can I use this general-purpose lithium grease on my chain until I can get some Finish Line lube? Thanks in advance.
8
votes
3answers
1k views

What's the point of removing the excess oil after lubing the chain?

There is a very strong point in bike-mechanics culture, which I've seen in very competent answers here, too, to apply one drop of lube in every single roller of a clean chain, and then (!very ...
2
votes
1answer
623 views

Using non-Shimano link with Shimano chain?

I know the official answer from Shimano is you can only use their quick link, but practically is it okay to use SRAM or KMC links? Specifically, I have the Shimano HG-40 chain.
8
votes
2answers
1k views

Should a link opened/closed by a chain-breaker be stiff afterwards?

I disassembled my bike's drivetrain to degrease and regrease all the components. I used a chain-breaker for the first time (previous bikes had a master link) to open a chain link and remove the chain. ...
0
votes
4answers
7k views

Rust on chain and cassette

It looks like rust on my chain and cassette. Both were new 5 months (4000 km) ago. The chain is about 60% worn/stretched. I've been riding 5 days/week, 40 km/day, Toronto on mild winter roads, and ...
1
vote
2answers
2k views

Chain “vibrates” on higher gears

My freewheel that I have installed myself only 1.5 years ago has totally worn out by the moment and so I just had it replaced along with a chain at the workshop. I'm still concerned though about the ...
4
votes
6answers
3k views

What's the most useful style of chain gauge?

I see that there are three kinds of chain wear gauge: The basic kind. I'm used to using this kind: The hook style. Supposedly provides an indication of how worn the chain is. I've used these and ...
8
votes
2answers
3k views

Should I Oil A Single Speed Chain?

My question is simple. Do I need to oil a chain on a single speed bike?
8
votes
3answers
4k views

how do I paint a bicycle chain?

I've seen chains with so many colours, white, red, you name it. I would like to give it a try (this paint job is intended for visual styling of the bike, nothing related to protecting it), but I have ...
4
votes
1answer
679 views

Is my front derailleur angled straight?

I am attempting to adjust my front gears and have also been following a video to adjust the high/low position of my front derailleur. The issue I am having is that the low adjustment is no where near ...
3
votes
2answers
6k views

Options for replacing a 7 speed Shimano cassette / chain

I would like to replace my 7 speed HG70 cassette and chain. My problem is that it is increasingly difficult to find quality parts for 7 speed system. My bike is a Trek 970 from 1993, originally with ...
2
votes
2answers
2k views

SRAM chain with Shimano cassette and crankset?

When new my bike had all Shimano components. When it was time to replace the chain, the LBS installed an SRAM chain. Was that a mistake on their part (if so, was it a bad mistake)? I had a problem ...
9
votes
9answers
15k views

While pedaling standing up, bike crank gives in as if shifting, what is causing this?

While standing up and pedaling, the cranks give in as if shifting. It seams like I am shifting down, but my hands are off the shifter, almost like the chain is skipping a link. I took it to a bike ...
5
votes
4answers
2k views

What causes chain suck?

Specifically when changing gears from middle chain ring to smallest, the chain will sometimes get 'sucked' up between the inner chainring and chain stay. It seems to happen more often in muddy ...
18
votes
8answers
8k views

New chain is pre-lubricated, should I clean it?

My new chain is totally coated in lube. I would never ride a bike with a chain like this normally. All that goop is just going to collect flotsam from the road and wear out the chain. Should I clean ...