Repairing, maintaining, or replacing the chain on your bike that connects the front of the drivetrain (cranks, chainrings) to the back (cogs, cassette).

learn more… | top users | synonyms (1)

3
votes
1answer
261 views

What kind of lubrication is used on Electra Townie 8i chain?

I just got a new Electra Townie 8i and notice that the chain appears clean and silvery. Is it supposed to be lubricated and if so, what is recommended lubrication?
3
votes
2answers
298 views

What kind of master link is most convenient for IGH / fixie / ss setups?

Here's a question related to this and this -- I've got a IGH bike and want to keep the drivetrain clean. I prefer to remove the chain for regular maintenance, but don't want to have to remove the ...
2
votes
3answers
2k views

Chain skipping on MTB

I've had my Trek 3900 for about a year now, and I replaced the chain about 3 months ago, but otherwise it's running with the same parts it came with (not counting tubes and tires). I had to replace ...
4
votes
2answers
2k views

Chain drop under load

I have a problem. Today I was riding (flat-out) up hill, and went to shift up a gear on the rear, which caused the chain to drop off the front chain-ring (was in the big-ring, so dropped to the ...
13
votes
7answers
34k views

How tight should a fixie's chain be?

I ride an SE Lager fixed. How tight should the chain be and what is the best way of measure it? I have a chain tug so I can be pretty accurate in dialling in the right amount of tension. I don't ...
2
votes
3answers
5k views

Why is my drivetrain so noisy after replacing the chain?

I ride an SE Lager fixed. On the 30th of May this year I did a bit of an overhaul, replacing the rear cog, chain, wheels, tyres and brake pads. I measured the chain last weekend and discovered that ...
10
votes
7answers
3k views

isn't a fixie without a full chain guard a safety hazard?

Yes, I know it would totally ruin the clean lines and the uncluttered, (well maybe just a discreet front brake), looks, but I've never seen this question asked, much less answered. A chain guard ...
3
votes
2answers
827 views

Squeaking sounds after lubricating the cogset and chain

My bicycle didn't produce any squeaks until the last weekend, when I decided to make a little maintenance. First, I used "Easy Clean" spray from the White Lightning brand to clean the cogset and the ...
20
votes
9answers
7k views

How to achieve an always clean chain

My chain and cogs always look very dirty as the oil attracts dirt. It is a constant problem as you can't fully avoid stains on your trousers and hands. Also, that looks ugly and I believe it wears the ...
7
votes
2answers
7k views

if I replace chainset and chain should I replace back cassette as well?

I am replacing my chainset and chain, as its totaly worn and causing the chain to jump off when I pedal. The cassette is fairly worn too, but is not causing any problems. If I buy a new chain and ...
5
votes
7answers
4k views

How long should a well maintained chain last and what can I do to prolong its life?

I commute on a fixie. I'm using KMC Z410 chains. Every evening if it's wet I wipe and re-lube my chain, using ProLink lube. Every weekend I remove the chain, soak it in kero, brush it with a citrus ...
6
votes
3answers
651 views

Should a chain be replaced even if it's not stretched?

This question suggests using a tool or ruler to assess chain stretch to determine when to replace a chain. I have one such tool (Park Tool CC-3), and it tells me that my chain is not stretched even to ...
8
votes
4answers
8k views

Mysterious case: chain falling off large chainring, how to fix?

On my commuter bike I decided to rid myself of the small inner chain ring (which is almost never used) and front dérailleur (now redundant). However, I have come across an unusual problem. Whilst ...
3
votes
3answers
989 views

What's the loss of effective output, with a worn chain?

I was just bought a new fine ultegra chain for 10 speed road race bike. This is actually the first new chain for this not so old bike. I am a fan of statistics, measuring power with a power unit on my ...
1
vote
2answers
901 views

4 year old alivio 8 speed rear gears - compatible chain

I need to replace my chain (for the first time). My bike is roughly 4 years old using Alivio 8 speed (24 gears) system. Looking at wiggle they seem to have 3 chains available. Looking at other ...
1
vote
3answers
12k views

How to fix problem with mountain bike chain falling off gears?

The chain on my girlfriend's bike came off the front gear today, it looks like the back gear changing mechanism isn't handling back-pedaling properly, whenever she pedals backwards the chain slacks ...
1
vote
3answers
7k views

How do you connect and disconnect a quick release chain link?

I can't find any nice video or pictures tutorial that explains how to connect and disconnect a quick release chain link. Am I not finding anything because it has another more common name? How do you ...
5
votes
2answers
316 views

Chain loses tension on straight drop out

I have single speed bicycle with a straight dropout. The problem I'm having is that over the course of a week, the chain loses tension until eventually, if I do not re-position the back wheel again, ...
22
votes
3answers
6k views

Does the chain direction make a difference?

Recently, I helped a friend install a new chain on her road bike, and for the first time read the instructions for installing one. It seems to claim that there's a forward direction, and that it ...
2
votes
1answer
146 views

Which chain should I use for Rex Touring with 5 gears?

The bike is about 15 years old. The size of tyre is probably 28. I want to change the old chain. I am not sure which chain I can put to the bike. Does any chain which length is enough for 28 fit my ...
3
votes
3answers
1k views

Are chain-drive gears 'ridiculously' efficient even when dry of oil?

Allegedly chain-drive gears are something like 99% efficient when well oiled and something like 98% efficient when without oil. Personally I do not like the noise a dry chain makes, this has a 'I ...
1
vote
1answer
328 views

Dismounting wheel in a fixie

I have a fixed gear bike, Rocky Mountain Boroughs Fixie (see picture). The chain is very tight compared to any free wheel bike. So anytime the tire gets punctured (unfortunately very often) and I want ...
5
votes
6answers
20k views

Problem with chain skipping without trying to shift (even with new chain and gears)

I have a mountain bike where the chain intermittently skips when put under load on the middle (and very rarely on the smallest) chain ring. It is not related to shifting. I've taken several steps to ...
5
votes
3answers
2k views

What are the advantages and disadvantages to chain wax?

I recently bought a new chain for my bike and it came full of chain wax. I was wondering if this was a better lubricant then regular chain lube, or if it had some other qualities that the manufactures ...
7
votes
3answers
9k views

Is my chain too long?

I'm in the process of setting up a new drive train. When using the smaller chainring and smallest sprocket (hence least amount of utilized chain), the chain brushes up against the bottom of the ...
5
votes
8answers
8k views

Should you use GT85 on your chain?

I've been told by various sources that WD40 is bad for your chain so have avoided using it. I've seen people using GT85 on their chains but I'm not really sure how the two products differ. So my ...
6
votes
3answers
22k views

How many chain links do I need?

Looking for chains at ebay, I see, that they have 106, 114, 116 links and so on. I have a racing bike (2x7) and see, that chains are often announced as 6-7-8-speed, 10-speed, 11-speed. Since there ...
5
votes
1answer
331 views

does my degreaser hang around and destroy my new chain lube?

I generally clip on the Park chain cleaner, fill it with a cheap department store degreaser (Rubbermaid), run it through for a few seconds, then fill the chain cleaner with water once or twice or more ...
13
votes
3answers
459 views

Will regular removal, cleaning and re-placing of my chain weaken or damage it?

When I'm cleaning my bike, the quickest way to degrease my chain is to remove it and degrease it in a small tub. Will constant removal / re-adding to the bike cause damage? I don't have a quick ...
1
vote
1answer
229 views

For what kind of bike and under what riding conditions would a Biologic FreeDrive Chain Cover be suitable?

I've got a Strida 5.2 and absolutely love the greaseless experience. For ordinary chain bikes, when could a Biologic FreeDrive Chain Cover be used without causing troubles, but only provide a cleaner ...
20
votes
4answers
113k views

How can I tell which size chain my bike uses?

After learning how to break a chain and reattach it, and also how to add and remove a master link, I find that I can now do much more in the way of maintenance at home. I'll no longer need to bring my ...
2
votes
2answers
776 views

Which master links for 1/8 inch aka BMX chains?

It was very easy to find master links for 3/32inch (aka 9-speed chain) but I cannot find them for 1/8 inch (aka BMX chain). My chain is the Nexus CN-NX10. Cannot understand the odd observation that ...
3
votes
5answers
1k views

Properties with Belt-driven Chains?

This reply about belt-driven belt got my interest here. It does not need lubrication at all according to the replier. What are other properties with belt-drive chain? Where does the idea come from? ...
5
votes
2answers
355 views

Wiping extra Lube really important with all types of Lubes?

This question about chain maintenance during touring raised this quetion. This tip sounds very unintuitive, of course, I know that the extra lube will attract dust (not good to chain) but I have paid ...
7
votes
2answers
1k views

How to maintain chains during touring?

I think requirements are reusable, simple, small-size and things-to-easily-to-carry. There are exotic answers with chain clearers and other things that do not qualify to me simple. Perhaps, the ...
4
votes
3answers
679 views

Which durable Chain Breaker?

I bought the cheapest chain breaker, XLC 10EUR, and its head got loose on the first try (maybe due to my poor handling or it is not well-done product). I was on the journey and had to get it so did ...
11
votes
1answer
940 views

Do I need to change my cassette if I can't see any wear?

I bought a new road bike with Campag Athena 11 speed in March last year. To the end of Jan it had covered 9000km. In all that time I hadn't changed the chain because I don't have the Campag tool, and ...
3
votes
1answer
234 views

Should I use an already master-linked chain or add a masterlink to a plain chain?

Trying to find moderately-priced 9-speed chain is a pain, particularly with a master/missing link already installed. I can only find PC-971 master-linked chains from US market but shipping and ...
3
votes
1answer
394 views

Are all 9 speed chains compatible with all 9 speed systems?

My current chain is x9, but it's expensive in eBay. Can I use any 9 speed chain like on this page?
21
votes
2answers
5k views

How to know when to change a chain?

A bike shop employee used a tool he said would check the wear on the chain, and said that it should be changed. He said it took a measurement that meant the chain had expanded, but it is still hard ...
11
votes
2answers
531 views

How do you evaluate and choose chain lubricants?

Terms such as wet/dry/xyz/winter/summer/autumn lubricants are not well defined. I find it very hard to determine which bottle is worth buying, spray, bottled, wax, parafin, purple, green, Y (other ...
5
votes
2answers
842 views

Are lighter chains worth the cost?

I'm replacing chains on a number of bicycles, and trying to decide what chains to purchase. I'm a fan of Sram's master links, so I'm comparing the Sram PC-971 to the PC-991. The PC-991 is ...
4
votes
3answers
16k views

Heavier Thicker Chains and Gears for Winter due to Salt?

I have two bikes: one having gear-things outside and one with inner-hub. The gear-outside-bike has suffered a lot due to the salt during this winter, the other hilariously looks like a new one. I ...
6
votes
8answers
12k views

Are there substitutes for chain lubricant?

With long journeys and particularly during winter I have noticed that the salt erodes the chain very quickly, even when I have lubricated the chain beforehand. When you are missing proper chain ...
7
votes
1answer
2k views

If the chain/cog no longer drives the wheel, can this be fixed?

Suddenly (without anything sounding like it was broken) the chain no longer turns the back wheel. The cogged part of the wheel is turned by the chain but this doesn't turn the wheel. Is this ...
6
votes
6answers
474 views

Are there brands that sell weather-resistant chains?

I have to bike in bad weather and especially at work i have no way to store my bike in a dry place, this means that my bike chain picks up rust like nothing else, forcing me to clean it a lot. Now i'm ...
8
votes
1answer
655 views

Setting chain length

My chain broke and in a moment of silliness (I was cold wet and slightly annoyed) I threw the broken one away before thinking about measuring the new one. Is there a guide to getting the chain ...
6
votes
3answers
1k views

Single speed conversion chain keeps derailing rear cog under load?

The chain on my SS mt bike keeps coming off the rear cog under load (like when I hit a steep hill) it will hold right after it's tightened but after a few hills it starts coming off non-stop. Talked ...
7
votes
1answer
303 views

What is a sign that my chain needs to be lubricated again?

I just cleaned my gears, derailleurs, and chain. Lubricated the chain with Teflon dry lube. When will I need to re-lubricate again? Will I hear the chain make sounds? Do I do a visual inspection?
6
votes
5answers
818 views

Is it possible to put a chain on without removing the rear wheel?

I have a bike with a single chainring up front and an internal hub and a coaster brake in the rear. (For those unfamiliar with this setup, it's essentially like having a single-speed bike in that the ...