I have just finished my first fixed gear based on an old Raleigh Rapide frame. But the chain line is off and I hear a crackling/ticking noise when I pedal. The wheels are replace with a gipiemme ...
I'm planning a new build and for the first time, I'm working with a frame that requires an Italian bottom bracket. My question isn't specific to the build, but a general question about chainline. ...
Here's the facts: My bike frame requires a 70 mm Italian threaded bottom bracket I'm going to use a Nuvinci N360 IGH which requires a chainline of 49 (± 0.5) mm. I have Andel fluted cranks, which ...
I am converting an old Trek 660 frame to fixie. It takes a 68mm bottom bracket and I'm putting in an SKF bottom bracket (like this) with both a BMX profile racing 110mm 46t and redline BMX cranks ...
I have a bike with Alfine 11 and belt drive. I think I could use a 175mm crank, certainly a 172.5, rather than the 170 Alfine comes in (height 6'1" frame size 60cm) and going a little lighter and ...
I am getting a repetitive grinding sound/slight vibration while fully mashing on my Kona-humu single speed. Description of Problem This grinding is more similar to what you would hear from an ...
Ok I have a number of variables at play here and I'm trying to obtain the best chain line possible this is on my polo bike so not super important but if there is a way I can do it I'm willing to put ...