The cogs (gears) at the front of your drive chain, connected to the cranks.

learn more… | top users | synonyms

0
votes
1answer
58 views

Are chain ring spacers a good solution to adjust chain line?

I recently converted my mountain bike from a 2x10 to a 1x10. I have a Shimano XT Hollowtech ii crankset and I like it a lot, but its traditionally a 2 speed crankset. When I'm in my 1st gear on the ...
0
votes
1answer
11 views

How do you remove the sprocket from an eighthinch splined BMX style crankset?

I have the EighthInch Freestyle Splined Crankset. These are very similar to profile bmx cranksets. I purchased a larger sprocket to use with the crankset. I've used a crank puller to remove the drive ...
1
vote
1answer
155 views

Why is my electric bike 'clanking' under load?

I have a Giant Esprit Twist Power electric bike, which apart from not having nearly enough words in its name also has a problem related to the crank. When I put a lot of load through the pedals there ...
0
votes
2answers
54 views

what is the biggest chainring I can put on my mountain bike?

I am going to do a 'gravel grind' ride with lots of elevation gain and want to be able to keep up with the cyclocross bike riders. From what I understand they have 46/36 chainrings. My mountain bike ...
0
votes
3answers
38 views

Campagnolo chainring bolt stuck to crank

I have a Campagnolo 11 speed Athena setup. I am enjoying a noisy creak which I suspect is located in my chainring bolts. I have replaced all of them, except the one that screws the chainring to the ...
1
vote
1answer
85 views

Front shifter has three positions, but front chainring is only double. Is this a problem?

My Merida Cyclocross 3 bike has a double chainring at the front. After a few weeks of being a little annoyed about the awkward shifting when going up steep hills, I realized that the front shifter and ...
0
votes
2answers
75 views

Can I install a double chainset on a bike that was originally designed for a triple chainset?

I have a BTwin Triban 3 which has a triple chainset that needs replacing. I am thinking of replacing it with a double chainset this time. Is this possible, or do I need new shifters and a different ...
3
votes
6answers
754 views

What is the easiest to upgrade my chainrings from a double to a triple?

I have a 2007 Specialized Tarmac Pro Double and I need some better gearing. I am doing more hill climbs and I feel that I need at least two lower gears than I already have. What would be the most ...
1
vote
2answers
59 views

Which chainring? Shimano M785

So I've never changed a chainring before. But the first step is finding the right one. I have a Cube Hyde SL 2012 . It describes the crankset as Shimano Deore XT FC-M785 Hollowtech II 42x26T., ...
0
votes
1answer
57 views

Are Osymetric chainring and power2max Classic power meter compatible?

I'm thinking about trying the famous Osymetric chainrings, and I would like to use it with a power2max Classic power meter. I just want to be sure that there are compatible? It's very difficult to ...
2
votes
4answers
3k views

Why use 54T (or bigger) chainring?

In time trial races, I see people are using these big chainrings. Is 50/11 combination doesn't give enough top speed? What's the real advantage? I can only think of the negative, which is it makes the ...
0
votes
2answers
41 views

Chain Slip at front changing from large to small front chain wheel (with large cog at back)

I have a Pinnacle Neon 3 Hybrid, Shimano Sora 9 speed cassette and 2 chainrings at the front. The bike is 2 weeks old and I've cycled around 65 miles so far. Chain ring has come off 3 times at the ...
2
votes
1answer
103 views

Upgrading from 50/34 to 50/39 with Shimano Sora?

I have a road-biased hybrid that came with a compact 110mm BCD 50/34 Shimano Sora crankset and chainrings. I'd like to upgrade the inner ring to 39, but I'm having some trouble figuring out what to ...
0
votes
1answer
25 views

Can I add 3rd chainring to a an old Sugino double?

I have a vintage (165mm-Crnk) Sugino 40/48 on here now, but am looking to add some gear range for up hill with med-sm load. I have a Tiagra short cage RD and a Sora double FD. I am friction shifting. ...
0
votes
2answers
80 views

Race Face Crank/Chainring Compatibility

I have a Race Face Evolve DH crankset which takes 104 BCD chainrings. However, I pulled a 104 BCD chainring off a Shimano Acera Crankset and the rings don't interface properly with the Race Face ...
0
votes
1answer
72 views

What symptoms can I expect from two broken teeth on a chainring?

Dealing with chain skipping (but mostly on the smaller chainrings, truth be told) I've wondered how these affect the riding and how many problems and what kind should i expect from these two broken ...
3
votes
1answer
65 views

'1 1/8' vs '1/2 1/8' chain/chainring

Some 1/8 chains and chainrings are sold as "1/2 1/8" and some as "1 1/8". What is the first number describing? My understanding is that practically all modern chains have a 1/2 inch pitch.
4
votes
2answers
455 views

Chain drops in smallest gear under load

I'm baffled. I installed a new chain, cassette, cables and housing yesterday. On the stand, all is happy and shifting is silky smooth. On the road all seems happy except on the bigger cogs in back (in ...
1
vote
2answers
97 views

What gears should I go for?

I have a Trek road bike (although you might call it a hybrid since it has straight handlebars. I do about 3,000 miles per year on it for general health reasons (up to 30 miles at a time and averaging ...
1
vote
2answers
98 views

Should I switch to a smaller chain ring?

I am back to cycling after 7 years absence due to injury and time commitments. When I started 3 months ago I weighed 20kg more (105 kg in total) than when I stopped. My target is to build fitness ...
6
votes
2answers
367 views

Can I replace a middle chain ring with one with different number of teeth?

I recently upgraded my wife’s bike with a Shimano XT triple crankset. The number of teeth is 44.32.22t. However, the middle chainring on the recent XT crankset is carbon-reinforced, and I’d prefer not ...
0
votes
2answers
144 views

cannondale cadd10 105 crankset replacement

I had a terrible crash on my Cannondale CADD10 105 (11spd) and wrecked the crankset (the bigger ring bent). It is FSA Gossamer Pro, BB30, 52/36 from the website. Is there an identical one available ...
1
vote
2answers
110 views

Why is my big chainring is so scratched form the inside?

I have noticed a lot of scraping on the inside of my Trushift 44T plate. Is it just a function of distance, time and color or is it a clue that something is not working properly? The bike was bought ...
0
votes
1answer
608 views

Can I use 11 speed chainrings with 9 speed chain?

To be more specific, my bike come with Shimano Sora 9 speed group set. I'm using a KMC X9 9 speed chain. I studied quite a lot of websites. They claim that chainrings are compatible with any speed of ...
1
vote
1answer
120 views

Choosing chainring configuration

I'm interested in how I would choose a chainring configuration, supposing I was either replacing mine or building a new bike for a similar usage. I have a 50/39/30 triple chainring (& 10-speed ...
26
votes
15answers
41k views

Triple vs Double chainring?

I'm bike shopping for my first road bike, and I've asked for a lot of advice from my father who was a serious cyclist once upon a time. After showing him one prospective bike, he dismissed it with a ...
0
votes
0answers
427 views

Replacement crankset for Shimano SG B 52/39?

I have a very basic Specialized Allez (XL frame) street bike (pictured in my avatar) with a cheap SG B52/39 chainring needing replacement (warped and wearing out after two years of daily use). But ...
0
votes
1answer
126 views

Shimano FC-M521 middle chainring replacement

What exact torque should be applied to secure the double gear fixing bolt (Y-1FM98020) ? And what tool is usually used to fix the nut without damaging it while tightening the bolt?
2
votes
4answers
417 views

Do I have to stop pedaling when shifting up the front chainring?

If I keep pedaling when shifting up the front chainring, it would fail. Moreover, the chain keeps rubbing with the chainrings and produces many noises. Thus, I have to stop pedaling for around one ...
9
votes
6answers
11k views

Mysterious case: chain falling off large chainring, how to fix?

On my commuter bike I decided to rid myself of the small inner chain ring (which is almost never used) and front dérailleur (now redundant). However, I have come across an unusual problem. Whilst ...
7
votes
3answers
9k views

How do I calculate the diameter of a chainring from the number of teeth?

Simply knowing the number of teeth on a chainring can we determine an accurate diameter?
5
votes
3answers
1k views

Chain slipping on middle chainring

I have recently replaced the chain and the cassette. Previous chain never slipped. I never had any problems with it at all. But I have made about 10 000 km on it and the wear was beyound any limits, ...
3
votes
2answers
145 views

Is it possible to use a two or three chainring with an internal hub?

I have a Bullit cargo bike. It has a Shimano 39t chainring and a Alfine 8 rear hub. I was going to go for a Rohloff to get more gears, but the price is just getting stupid. I looked at the Alfine 11 ...
5
votes
6answers
2k views

Why would a manufacturer change chainring sizes drastically between years?

A friend was just showing me the 2010 Cervélo S2 specs, as well as the 2011 S2 specs, and the Ultegra line, at least, changes from a 53/39 chainring set in 2010 to a 50/34 set in 2011. This seems like ...
1
vote
2answers
181 views

How much assembly is required when an LBS orders a bike?

I'm looking to order a Marin Lombard Elite from my LBS but I want to replace the FSA BB and crankset with Shimano or SRAM parts, and change to a 52/36. When my LBS orders it, does all of that come ...
0
votes
2answers
95 views

Gears, distance, cadence = Speed [closed]

My bike is a Giant "Revolt" and I have a speed/Cadence sensor (from Giant). It doesn't always record accurately. But my question: I'm looking for a Chart that gives me the distance traveled & ...
1
vote
1answer
97 views

Campagnolo crank spider inter-compatibility between 'standard' and 'compact' chainrings

Will a Campagnolo Athena (2014) crank spider and crank arm from a 'standard' chainring setup of 39/53 accommodate 'compact' chainrings of 34/50, also Campagnolo Athena (2014)?
0
votes
2answers
143 views

24t or 26t granny gear?

Getting a new crankset, decided on this one from Rivendell: http://www.rivbike.com/product-p/cr1.htm Question: Should I keep the 24t granny or get them to swap it out for a 26t? I have some concerns ...
1
vote
1answer
219 views

SLX chainring compatibility

I'm considering swapping the inner ring on my SLX double chainset (M665) from 22T to 28T. I noticed that the newer M675 has a 40/28 option, so I figured that the 28T chainring from this set-up would ...
0
votes
1answer
117 views

What does the chainring have to do with SRAM YAW

I'm shopping for 110 BCD chain rings and I noticed that some of the SRAM ones are labeled "YAW FD only". As far as I can tell the derailleur doesn't touch the chainring so whats so special? Can I ...
5
votes
2answers
202 views

Is the same effort required to maintain a set speed using different sized chainring / cog combinations with same ratio

If I have a bike with the same cranks setup with a 36t (chainring) / 12t (cog) ratio and the same bike setup with a 48t (chainring) / 16t (cog) ratio, would the effort required to maintain a set speed ...
0
votes
1answer
272 views

Swapping chainrings on old ultegra crank

I have a 2002 Ultegra 9-speed triple with 52/39/30(?) chainrings. I swapped out the inner two chainrings twice and kept the original crank and 52-tooth ring. The 52t ring only gets used going downhill ...
1
vote
1answer
106 views

Can you use a 9 / 10 speed chainring with an 8 speed chain?

Does it matter if you use a chainring which is specified at 9 / 10 speed with a 8 speed chain?
1
vote
1answer
155 views

why do left shifters switch chainrings and right shifters cogs?

Can that be changed? Is it just convention? Is there any commercial bike that comes with a left-shifter that switches cogs?
0
votes
2answers
74 views

Chain too wide for gap between chainring and chainring guard

I have a Seek 0 2013 and recently the chain has been stretched so far that it needed to be replaced. On the Giant site it says that this is sold with a KMC Z51 1/2" * 3/32" chain. I've since gone to ...
0
votes
3answers
269 views

Can I change my large chainring without changing the entire crank?

The bike I wanna buy has a 42/34/24 crankset and TX-50 FD, now I was wondering if I could install a 48t(or bigger if possible, do tell) ring upfront while keeping the rest (i.e transforming it to ...
1
vote
3answers
1k views

Can I use a Shimano 105 10 speed BCD 130mm 52t chainring as a replacement in my 9 speed tiagra triple crankset?

I currently run Tiagra triple 9 speed crank, 50/39/30 The BCD on the 50 being 130mm. I'd like to replace the 50t with a 52t to make it 52/39/30. I'm looking at a Shimano 105 52t chainring but it says ...
1
vote
1answer
235 views

What are the differences between Tiagra and 105/Ultegra chainrings

There is quite a big price difference between Tiagra and 105/Ultegra chainrings. Do the more expensive ones last longer? Is there difference between performance? Is the weight only relevant ...
0
votes
1answer
77 views

Outer chainring with two sizes

I see outer 130 BCD chainrings with 52T/39T. Why the the 39T in the label? How does the outer care or know what the inner ring is? What would be different about 52T/42T? Does the 39T care what ...
3
votes
3answers
451 views

Chain falling off inner chain ring no matter how L screw is set

Bike is a relatively new Cannondale Carbon Synapse with the Ultegra 6800 groupset (although front chainrings are FSA). Has about 1000KMs on it. Bike has been great, but I went out on a ride today ...