1
vote
1answer
100 views

converting to fixed gear, chain problem

I just got a 16 tooth and tried to put on the old chain, BUT while it fits on the pedal cog (46 tooth), it does not on the rear cog. How can I solve this? a different cog in the back or a different ...
1
vote
1answer
1k views

What Are the Widths of Shimano 8, 9, and 10 Speed Cassettes?

I was hoping that someone could provide me with the precise Shimano road-bike 8, 9, and 10 speed sizes for the following: Cassette Spacer Width Cog/Tooth Width Maximum Chain Width
3
votes
1answer
349 views

smallest cog of cassette rubbing on seatstay

I built up a NOS late 90s steel frame with a similar era Campagnolo Chorus 9 speed groupset. Has gone well, except the stays/dropouts don't seem to quite like a 9 speed cassette. The second smallest ...
3
votes
1answer
202 views

Checking fixie for damage

This morning during my morning commute I had an unintended lesson in fixie skidding: I dropped the chain, it got stuck between the cog and the hub and locked the wheel. I'm not sure where that skill ...
2
votes
2answers
408 views

What is causing noise/vibration high power input on right hand (drive side) crank?

I am getting a repetitive grinding sound/slight vibration while fully mashing on my Kona-humu single speed. Description of Problem This grinding is more similar to what you would hear from an ...
4
votes
2answers
529 views

Can you reverse the sprockets on a cassette to lengthen its lifespan?

I know my bike's rear cassette needs replacing, but before I do that, is it feasible to dismantle the 8 sprockets to reverse their spin? Can you increase the lifespan of a cassette by letting the cogs ...
1
vote
1answer
1k views

Using a new chain on worn out sprocket?

I went to REI yesterday because my bottom bracket was creaking. I brought my bike with me so I could get the right tools to take it off, but while I was there the mechanic actually took the ...
2
votes
3answers
4k views

Why is my drivetrain so noisy after replacing the chain?

I ride an SE Lager fixed. On the 30th of May this year I did a bit of an overhaul, replacing the rear cog, chain, wheels, tyres and brake pads. I measured the chain last weekend and discovered that ...