I'm interested in recommending my boss get the workshop in which I work a bottom bracket tap and facing set. As it's quite an investment it's important to me to know what you're getting for your ...
I've part stripped, and ultimately crossed the thread on my crank and can't remove my pedal now. This was done whilst riding and then trying to remove the pedal from the damaged crank. I figure the ...
I'm trying to troubleshoot a weird barely-felt click on my cruiser. The nest step of the process is to swap out the pedals and see if the problem goes away (if not, the problem is likely the bottom ...
I just replaced my cassette and my crank with one from the LBS that the guy said would work. I've had no problems with the cassette, but the crank is too wide so that my front derailleur does not ...
A friend called me up yesterday after a mis-adventure during his attempt at a bottom bracket overhaul. He stripped out the threads on the (left) crank arm while using a Park crank puller. In a pinch, ...
On mountain bikes of a certain age, "Biopace" chainrings are ubiquitous. These chainrings are (purposely) not circular. It seems that most people today agree that Biopace rings didn't live up to the ...
I am looking for a a 10 speed dual crankset that has 180mm cranks. I see the SRAM cranksets only come in 170 and 175mm.
What is the best way to determine the correct crank length for my height and more specifically my leg length?
As far as I can tell just the Outboard BB is.
Recently the cranks on my bike started to creak. I checked with my usual "bike-bible" Park Tool. They recommended dis-assemble, lubricate, re-assemble. So I did that. Remove cranks. Remove spindle. ...