2
votes
2answers
131 views

how many spacers do I need for a 83mm bottom bracket and a 142x10 hub?

I have a Zee crankset on a 83mm bottom bracket (downhill bike). The Shimano manual says to use two 2.5mm spacers on the drive side, and one 2.5mm spacer on the non-drive side. However, this presumes ...
0
votes
1answer
144 views

Peugeot PX-10 with Shimano 105 Triple with BB-6700

Upgrading my french PX-10e with shimano 105 cranks. What bottom bracket can I use with this 68mm bottom bracket with french threading? Is there a threadless BB available?
3
votes
1answer
355 views

Chainring offset - chainline - of Alfine vs. Ultegra/Dura Ace

I have a bike with Alfine 11 and belt drive. I think I could use a 175mm crank, certainly a 172.5, rather than the 170 Alfine comes in (height 6'1" frame size 60cm) and going a little lighter and ...
2
votes
3answers
678 views

Crankset replacement

I have Exage 300 lx crank 48,38,28 Crankset. It is also Biopace. I would like to replace it since it is worn out. What current model from Shimano is a suitable replacement? regards
2
votes
4answers
474 views

deore LH crank on 105 chainset

I have a 105 triple chainset (hollowtechII) and the left hand side has developed a crack. Now I can't find any replacement 105 LH cranks but there are some Deore ones on the ebays that aren't too ...
3
votes
1answer
1k views

Shimano chainring / crankset compatibility

I discovered a Shimano FC-2300 Crankset (175-mm 52/42/30T 8 Speed) for $62 on Amazon - is this compatible to replace my old FC 3301/3304? The longer story is I need to replace my Shimano chain ...
4
votes
2answers
1k views

What chainrings are compatible with the Dura Ace 7900 crankset (apart from 7900 chainrings)?

I need to get a 52t chainring for my 7900 Dura Ace crankset but am not willing to spend 150 euro on a chainring. Would an Ultegra 52t 6700 chainring work on the 7900 Dura Ace crankset ?
2
votes
2answers
836 views

Attaching crank arm with Shimano SLX M660

Firstly, apologies if this question has tones of frustration, my new crank set and bottom bracket has never been installed correctly, so I am going to do it myself. Should the drive spline on the ...
2
votes
1answer
245 views

FSA GOSSAMER ROAD CRANKSET with BB7800?

Can FSA GOSSAMER ROAD CRANKSET be used together with BB7800 Dura Ace from Shimano ? Thanks