The crankset is the combination of components that convert motion from the rider's leg movements into rotational motion to drive the chain and propel the bike. The crankset includes one or more chainrings (sprockets) and the two cranks, or arms, to which the pedals are attached.

learn more… | top users | synonyms (2)

2
votes
2answers
61 views

Does anyone know of a machinist who could convert a dual ring Campy Nuovo Record chainset ('spider') to accept a 3rd chainring?

I have a 1971 Raleigh International whose Campagnolo Nuovo Record chainset has Campy pedals that are 'frozen' into their threads (I know, this is an instance of neglected maintenance). I really like ...
26
votes
15answers
41k views

Triple vs Double chainring?

I'm bike shopping for my first road bike, and I've asked for a lot of advice from my father who was a serious cyclist once upon a time. After showing him one prospective bike, he dismissed it with a ...
0
votes
1answer
308 views

can you put a shimano XTR M980 175mm stage power meter on a XT M785 175mm setup?

I would like a stages power meter on my set up but cant figure out if the bottom bracket sizes are correct and if even the new crank will fit at all?
0
votes
0answers
429 views

Replacement crankset for Shimano SG B 52/39?

I have a very basic Specialized Allez (XL frame) street bike (pictured in my avatar) with a cheap SG B52/39 chainring needing replacement (warped and wearing out after two years of daily use). But ...
1
vote
1answer
154 views

Praxis Bottom Bracket Performance on BB30 Frame

I'm looking at upgrading the crank (stock FSA to Force 22) and getting a Praxis BB for my Cannondale CAAD10 BB30 frame. http://www.praxiscycles.com/product/conv-bb-sramgxp-isis-2/ It seems like ...
0
votes
1answer
82 views

Bottom Bracket Press fit to a square taper

I like to use my old Campagnolo crank on a new road bike frame. The frame has already a Pressfit BB71-41A installed. The crank needs a sqaure tape. Is it possible to use the crank with a adapter or do ...
0
votes
2answers
80 views

Finding a replacement crankset (and maybe a bb to go with)

I am in need of replacing my crankset on my hybrid discovery 401 - although all that is left of the 401 now is the frame and the bb/crankset. it has a sealed bb 113/68 square taper. I am struggling ...
1
vote
3answers
2k views

Removing bottom bracket from 79 peugeot frame

I would like to remove the bottom bracket from an old french peugeot race frame. I believe the frame was built in 79 judging by the decals and stamp on the bb. The bottom bracket and spindle at the ...
2
votes
2answers
161 views

Older XTR cranks - replace or adapt?

I've been using Shimano XTR cranks since my bike was assembled in 2002 (fc-m952?). I've replaced the rings a few times in the past (though not in several years) but it appears that these cranks were ...
1
vote
1answer
85 views

Hollowtech 2 cranks and bb how good they are?

I have been commuting by a bike for 6 months on a 9 speed bike. It has a standard squared taped BB and cranks screwed on it. Now I have heard those Hollowtech 2 cranks and BB and how they can improve ...
0
votes
1answer
160 views

Crank fell off square taper BB. Should I replace bottom bracket

After years of use and multiple retightenings my crank will fall off my bike about once a week and definitely needs to be replaced. I believe that the square hole of the crank has expanded to the ...
5
votes
4answers
6k views

Advantages of higher quality cranksets

What are the advantages of upgrading the crankset on a bicycle? For example, my bike (2009 Kona Dew) comes with a FSA Dyna Drive crankset. I'm assuming this is a pretty basic crankset since it lies ...
0
votes
1answer
356 views

Technical documentation for Shimano FC-M510

I'm having a hard time finding the technical documentation (equivalent of https://www.dropbox.com/s/yx5hq4cezpdz641/alivio-crankset-service.pdf?dl=0) for the Shimano Deore Hollowtech 1 crankset, ...
1
vote
1answer
60 views

A gap in the hole when inserting JIS square BB to a Truvativ Crank

I push the BB inside a crank hole without any tool but I expect a few milimeters gap. The Truvativ crank definitely uses JIS interface, but the question is: DOES the gap make any problem? or is it ...
4
votes
1answer
163 views

What is “crank preload”

I'm in the middle of swapping my BB30 cranks from stock FSA Gossamer to a (shorter length) SRAM BB30 "IA" S950. The S950 has a "crank preload" adjuster on the NDS which the spindle is also attached ...
1
vote
1answer
236 views

Is there any reason I can't convert a 36/46 to a 36/52 chainring?

My commuter bike is a converted cross bike (really just a cross bike with a rack on it). It works great, but I occasionally wish I had a higher top end gear. The crankset that came on it is a 36/46 ...
0
votes
2answers
449 views

Creaky crank problem: Campag 11sp Athena crankset (Ultra torque)

I have an awesome Ridley Noah carbon frame, fitted with Athena Campag 11sp groupo. Recently it's been making a lot of creaky and "pop" noises as I ride up hills (putting more force on the crank ...
1
vote
1answer
488 views

How to remove crank arm with broken bolt on SRAM Omnium crankset

I apparently over-torqued the crank bolt and it made a loud snapping sound. Now the hex wrench just spins freely and so I can neither tighten nor loosen the bolt. How do I remove the (non-drive side) ...
0
votes
2answers
342 views

Replacing Sora crankarm

so I accidentally screwed the wrong side pedal into my left hand crankarm on my Giant Defy 3 2014, and I have been looking to buy a replacement part myself and get a mechanic to install it. I am ...
0
votes
2answers
106 views

How to avoid getting swindled when buying used cranks?

I'm looking for a cheap, used set of cranks for a bike that was fished out of the garbage :) Because the cranks won't be on a bicycle when I go buy them, how can I tell if they're bent or not? I'm ...
1
vote
2answers
182 views

How much assembly is required when an LBS orders a bike?

I'm looking to order a Marin Lombard Elite from my LBS but I want to replace the FSA BB and crankset with Shimano or SRAM parts, and change to a 52/36. When my LBS orders it, does all of that come ...
3
votes
2answers
1k views

how many spacers do I need for a 83mm bottom bracket and a 142x10 hub?

I have a Zee crankset on a 83mm bottom bracket (downhill bike). The Shimano manual says to use two 2.5mm spacers on the drive side, and one 2.5mm spacer on the non-drive side. However, this presumes ...
2
votes
1answer
99 views

Scott Mountain bike. Problem with pedaling

Last 2 runs out my bike I have as suffered from what I can only describe as the pedal free wheeling ie pressure put on pedal does not drive the bike, but after a couple of turns it then drive the bike ...
3
votes
2answers
612 views

I have a broken my drive side crankarm - what do I need to do?

I recently had to dash home for a minor emergency. I noticed that one pedal was a bit wobbly but I had no choice but to push on. Once I got home and the emergency had been dealt with I noticed that my ...
0
votes
1answer
196 views

What to consider when looking for a chainguard?

Alright, the inner seam of my jeans is about done for, and I'm worried that I'll take a nasty spill the next time my pants get caught in there. Given that I don't want to wear gaiters or Lycra, I'm ...
0
votes
2answers
143 views

24t or 26t granny gear?

Getting a new crankset, decided on this one from Rivendell: http://www.rivbike.com/product-p/cr1.htm Question: Should I keep the 24t granny or get them to swap it out for a 26t? I have some concerns ...
3
votes
3answers
192 views

Problem with inside of shoe clipping crank arm

Crankset http://velobase.com/ViewComponent.aspx?ID=c50c795c-1016-4021-8ae8-9f68450fde36 and I know I'm using the right bottom bracket (119mm) The pedals ...
0
votes
4answers
1k views

Crank threads stripped - both pedals fell off

Something really strange happened to me - 2 years ago I bought a bike (Carrera Gryphon Hybrid from Halfords). I had just about 100 miles on that bike the month I bought it and than I locked it to a ...
1
vote
1answer
47 views

Crank type for an old peugot

I'm renovating an old Peugot and need to replace the crank. It takes a clotted crank however I'm not sure on the size. I brought a crank previously and it didn't fit, I couldn't get it on the bike ...
0
votes
2answers
420 views

How to find compatible cranks?

The threads on both cranks got busted due to putting the wrong pedals by the shop (here is my post with details) so I need to find replacement. How to find compatible cranks? My bike is Carrera ...
1
vote
1answer
145 views

Peculiar feel when pedaling

I ride an early 90s Scott Unitrack CST with the original Shimano Deore drivetrain it came with. Same as this one. When pedaling, the right pedal has a peculiar feel like a sudden inward jerk at a ...
1
vote
2answers
146 views

My bike Crank is making noise like Tuk, Tuk… once or twice when I pedal hard

I get a sound from my crank as if something were about to break to pieces when I stand and pedal hard.
0
votes
0answers
66 views

Don't know spindle size?

I'm not quite sure what size my spindle is on my giant downhill bike. I bought it a while back and it hasn't caused any problems. I've only recently taken up making it look good. All I want is 2 ...
1
vote
2answers
88 views

My crankset stops the pedals from turning when I tighten it onto the bottom bracket

This sounds like a stupid question however, I'm pretty sure I took these cranks off my current set up before. I wanted to ask if there is such a thing as a spacer on the bb axel ever that I might be ...
0
votes
2answers
52 views

Changing '75 international to clip in pedals and shoes

I have developed foot issues because my stiff insoles don't do me much good on the bike, especially if I stand to go up hills. So I think I need to switch to clip ins with good stiff shoes (Bont ...
1
vote
4answers
14k views

Can any bike crankset be exchanged for another?

I have a Specialized HardRock from the '90s. It's seen better days, but I got it for cheap. I had a bike shop look it over, but for some reason the guys missed the rounded off teeth on the front ...
0
votes
3answers
296 views

Can I fit 3 x9 speed crankset to 3 x 8 speed cartridge

I have a Merida hybrid cycle fitted with Shimano XT Deore 3 x 8 speed (42/32/24T). The crank has a few worn teeth and I would like to replace with Shimano XT Deore (48/36/26T). The seller states this ...
0
votes
1answer
289 views

Right crank (Drive side) on the left?

So, I wonder what happen if I replace my left crank with another right crank (either Square tapered or ISIS splined wouldn't matter). What is the disadvantages apart from: 1) the pedal thread ...
0
votes
1answer
342 views

Loose axis of Shimano Deore FC-M591-S Hollowtech II

I noticed that the right arm (drive side) of the Shimano Deore FC-M591-S Hollowtech II is getting loose. The right side has the axis attached to it as shown in the image. When I take off the left ...
0
votes
3answers
269 views

Can I change my large chainring without changing the entire crank?

The bike I wanna buy has a 42/34/24 crankset and TX-50 FD, now I was wondering if I could install a 48t(or bigger if possible, do tell) ring upfront while keeping the rest (i.e transforming it to ...
1
vote
3answers
1k views

Can I use a Shimano 105 10 speed BCD 130mm 52t chainring as a replacement in my 9 speed tiagra triple crankset?

I currently run Tiagra triple 9 speed crank, 50/39/30 The BCD on the 50 being 130mm. I'd like to replace the 50t with a 52t to make it 52/39/30. I'm looking at a Shimano 105 52t chainring but it says ...
0
votes
1answer
216 views

Can I fit a 105 crank arm (stages) to a Claris 2400 crankset?

I currently have a Specialized Secteur with a Shimano Claris 2400 crankset (compact). I'd like to buy a Stages power meter but they do not sell Claris crank arms. Can I simply put a 105 crank arm on ...
2
votes
1answer
442 views

What are the advantages of 4 arm cranks for road bikes?

Are 4 arm cranks the future for road bikes? What are the advantages?
0
votes
2answers
141 views

Old bike - what can I use for crank replacement?

The LBS doesn't have anything in stock to replace the crank on this bike : What is this type of crank and does anyone still supply them?
1
vote
2answers
4k views

Will a 9 speed crank work with 10 speed groupset? [duplicate]

Will this SLX 9 speed crank work with newer 10 speed groupsets? It looks to me that 9 and 10 speed cranks are the same. Or am I missing something? Are the spaces between the rings different?
1
vote
1answer
365 views

Are 130 BCD chainsets stiffer than 110 BCD?

I would expect the crank spider not to sacrifice much stiffness in expanding from 110 to 130, but the chainrings seem flimsy in comparison. Do I buy extra stiffness by using a standard chainset ...
2
votes
1answer
193 views

What's this noise? Is it from my crank?

I have recently been riding bmx, racing to be more specific. I ride around my neighborhood a lot when im not at the track and have noticed this loud clanking noise. I didn't know where it was coming ...
10
votes
4answers
625 views

Why use multiple materials on chainrings?

Why is it that on a typical mid-level road triple crankset, the outer rings (larger rings) will be aluminum, while the inner ring (small ring) is chro-mo? It seems to me that if aluminium was good ...
1
vote
4answers
252 views

Loose pedal bent under pressure

I was riding home today (with clipless pedals; SPD) and noticed my ankle was twisting strangely with each rotation of my legs. I had just gotten to the top of a massive hill. I pulled off to the ...
1
vote
1answer
15k views

diference between 170mm 172mm 175mm crank arm length on road bike [duplicate]

What is best for which use, advantage, or application, especially for climbing.