1
vote
3answers
89 views

Can I modify the gearing on a 2009 Jamis Aurora?

I have a stock 2009 Jamis Aurora. I'm looking to modify my gear set-up to make climbing hills with large loads a little easier on my knees, as I constantly find myself wishing I had one or more low ...
0
votes
1answer
73 views

how to adjust the derailer - apart from the L/H limiting screws

Pardon my newb terminology. My bike's chain will not stay on the H gear (the big ring) The front derailleur will not allow it. I have loosened the limiter screw out to it's maximum and, still, no ...
2
votes
2answers
176 views

Chain repeatedly tries to click into place without gear change

While pedalling, every 10 seconds or so, the chain on my bike makes the sound it makes during a gear shift - it "clicks", as if it's clicking into place in the new gear. But there is no gear shift ...
6
votes
4answers
194 views

Electronic shifters

I have been reading alot about the electronic shifters that are out now, specifically the ones on TREK bikes. I was wondering if they are worth the price, and more importantly how do they perform.
3
votes
2answers
391 views

(Automatic Bike Project) amount of torque required to change gears?

I am planning to build an electronically controlled automatic bike transmission for my senior design project. I'm personally more of an electrical guy, so dealing with the mechanics is somewhat new to ...
1
vote
1answer
329 views

How long does a shifter, rear mech and front mech last?

I am talking about absolutely dirt cheap components which are non-branded. In terms of number of kilometres how long do they last? The bicycle is ridden on city and country roads and maintained ...
2
votes
3answers
224 views

Slippage Under Load [New Bike]

I got a new bike a three or four weeks ago and have noticed the issue arise this last week or two. When I'm going up a hill (or any heavy load), my gears will slip. I don't think it's moving ...
3
votes
1answer
339 views

Can't change into the largest sprocket on rear derailleur

I bought my first road bike recently, and I've noticed I can't change into the largest cog/sprocket on the rear derailleur because when I pull the shifter the chain is pushed into the side of the ...
0
votes
1answer
405 views

What tension should the front derailleur cable be when setting it up?

I'm attempting to setup my front derailleur. I've slackened off the cable, adjusted the L screw so the derailleur just clears the chain. What position should the adjusting barrel on the handles be set ...
0
votes
1answer
206 views

Slow switching up higher gears

I have a fairly new MTB and I'm currently trying to tune the gears. Currently I can change down gears pretty smoothly I.e. 6 > 5 > 4 etc but going up the gears is slow for the chain to switch cogs. ...
3
votes
1answer
256 views

Direct Mount with top and bottom swing?

I want to buy a new frame that supports Direct Mount. Now I read that Bottom Swing is preferable for hardtails. At the same time, it was also mentioned that Bottom Swing is mounted higher onto the ...
5
votes
3answers
770 views

How can I increase the highest gear ratio?

I am looking for some higher cog front gears for an old bike I am considering. I've been away from it for some time and don't know the current number of cogs on the front ring, but I am looking to ...
1
vote
3answers
786 views

Gear up-shift not smooth

When I am pedaling hard and shift to a larger sprocket, the shift is not smooth or sometimes doesn't happen at all. Sometimes even double up-shifts don't work. There is no problem shifting when I test ...
4
votes
2answers
436 views

Different Gear Type when there's no Front Derailleur?

I have a 7 speed Jamis Boss Cruiser, 7 gears in back and one up front. I've been using it fine for several months now. Lately, the chain is coming off of the single front gear, usually after stopping ...
1
vote
3answers
194 views

Refitting Cable to Rear Derailleur

Whilst riding recently the cable slipped from the clamp on the rear derailleur. I'm attempting to affect repairs by re-clamping the cable. However by pulling the cable tight I have lost the bottom 2 ...
5
votes
2answers
3k views

Upgrade Shimano from 9- to 10- speed

I'm thinking of upgrading the 9-speed Tiagra rear mech on one of my (road) bikes to something, still Shimano, but 10-speed. The obvious replacements I'll need are cassette, right-shifter and chain. ...
6
votes
4answers
542 views

Comparing gear ratios on different bike types

How can I compare gear ratios on different wheel sizes? How can I compare gear ratios on MTB with tracking bikes with bigger wheels? How can I compare gear ratios with gear hubs?
0
votes
2answers
210 views

Unable to change from 14th to 7th

I've got a bike that I have had for about 8 weeks and it has already been back to be serviced twice. It's just returned from the second service and I've noticed that it is not shifting from 14th to ...
4
votes
3answers
9k views

Can I fit a cassette with a larger range with my Shimano Tiagra 10-speed ( GS-4600) derailleur?

I'm currently running a 2x10 shimano tiagra 10-speed drivetrain with a 50/34 compact crankset, a 12-30 rear cassette, and a Shimano Tiagra GS-4600 derailleur (that's medium cage aka road long cage) on ...
6
votes
3answers
2k views

Why does my bike stick in low gears?

When I change into a low gear (i.e. onto a bigger cog) on my back cog all is fine. However, when I later change up again the chain sticks on the larger cog. I commute about 10 miles a day and this has ...
4
votes
2answers
2k views

Is it practical to replace two sprockets on a cassette?

My bike has 53/39T chainrings and a cassette with 12,13,14,15,17,19,21,23,25 sprockets, but I like to ride up steep mountain roads. Is it possible (without great expense) to replace two sprockets to ...
4
votes
1answer
528 views

Is my front derailleur angled straight?

I am attempting to adjust my front gears and have also been following a video to adjust the high/low position of my front derailleur. The issue I am having is that the low adjustment is no where near ...
2
votes
2answers
311 views

Has bicycle gearing become 'easier' over the last few decades?

If you look at a 10-12 speed bicycle from the days before indexed gears you have a 27"/700c wheel with a 42/52 chainset and a 14-28 freewheel. At the time such a setup was standard for High Street ...
22
votes
4answers
26k views

What are the pros and cons of internal gears?

I've had my hybrid 24-speed for a bit over 3 years now, and just last weekend, when looking for a bike for my wife, discovered internal gears. Suffice to say it blew my mind when I saw 7-speed ...
26
votes
7answers
5k views

What's the efficiency of hub gears compared to derailleurs?

What's the efficiency of hub gears compared to derailleurs. I know that hub gears are not as efficient, a part from being heavier, how much will I loose in performance if I use hub gear?
28
votes
5answers
6k views

Perfectly setting up gears - how?

Every time I have my bike serviced, the bike shop sets up the gears on a stand in their workshop. The gears change perfectly on the stand, but when the bike is on the road, the rear derailleur doesn't ...