1
vote
1answer
63 views

Chain brushes derailleur

I just got my ever first road bike, Revenio 3.0. I'm so excited. Already got my ever first road bike injury as well - those damn cleats are hard to unclip, springs on those shiny new pedals are too ...
0
votes
1answer
79 views

Replaced faulty Shimano twist shifter but front derailleur still won't catch 3rd

I have one of the ubiquitous Wal-Mart-sourced Chinese Kent bikes, badged as a "GMC Denali." It came with the Shimano RS41 3x7 twist shifters. The front shifter got to where it would not physically ...
2
votes
1answer
179 views

Can I use friction shifters with a clutch style rear derailleur?

Can I use friction shifters with a clutch style rear derailleur like the 2014 Shimano Deore M615 Shadow Plus? Or does this put extra tension on the shift cable that will cause slips with a friction ...
6
votes
4answers
192 views

Electronic shifters

I have been reading alot about the electronic shifters that are out now, specifically the ones on TREK bikes. I was wondering if they are worth the price, and more importantly how do they perform.
3
votes
1answer
528 views

Can I run 2x10 XT Shifters on a flatbar road bike with 105 10 speed STI components?

I want to run 2x10 XT shifters on a flatbar but still want use the 10 speed 105 components of the road bike would there be any problems?
3
votes
2answers
384 views

(Automatic Bike Project) amount of torque required to change gears?

I am planning to build an electronically controlled automatic bike transmission for my senior design project. I'm personally more of an electrical guy, so dealing with the mechanics is somewhat new to ...
1
vote
1answer
322 views

How long does a shifter, rear mech and front mech last?

I am talking about absolutely dirt cheap components which are non-branded. In terms of number of kilometres how long do they last? The bicycle is ridden on city and country roads and maintained ...
3
votes
3answers
574 views

SRAM Rival front derailleur throws chain to the outside, even after professional adjustment

TL;DR: if you have a SRAM Rival front derailleur I'd love to know if yours looks "funny" like mine does--it's described in bold. I have a SRAM Rival groupset (from late 2011), including front ...
1
vote
2answers
829 views

Are Shimano R440 road flat bar shifters compatible with a mountain bike front derailleur?

The Shimano shifter flat bar series have the same cable pull length than the mountain bike shifters. Is this series compatible with a mountain bike front derailleur, Deore, for example?
2
votes
1answer
456 views

Can I run a SRAM road rear derailleur with downtube shifters?

Can I run a SRAM road (apex/rival/force/red) rear derailleur with downtube shifters? I though you might be able to mount the bar-end shifters on downtube, but it seems like they are a ratcheting ...
1
vote
1answer
212 views

First time buying parts ( derailleur, chain, rear axel, shifters) need help!

I have a 21 speed (3 front, 7 rear) NEXT bicycle ( model number 8568-49, year 2007.12.06) sitting in my back yard at the moment a few missing parts and I was hoping to get some help on what to get and ...
2
votes
1answer
1k views

Replaced Shimano Bottom Bracket, now front derailleur won't shift to largest gear

OK, so in my quest to get my old Trek 7000 ZX MTB running again after a long retirement, I am having an issue with replacing the bottom bracket. The bike came with a Shimano LP25 that is marked BC ...
4
votes
1answer
3k views

Upgrade Shimano Sora shifters to 105

I want to upgrade my 3x9 Sora shifters to 3x10 105s. However, looking at the Shimano Compatibility Chart, it appears to indicate that I'll have to replace my front and rear derailleurs in addition to ...
2
votes
1answer
408 views

Can I use microshift bar end shifters with 9-speed deore lx rear derailleur and 10-speed cassette?

Can I use indexed 10-speed microshift bar end shifters (on retroshift levers) with 9-speed deore lx rear derailleur and 10-speed 11-36 cassette? If not, What rear derailleur would work with the ...
3
votes
1answer
287 views

Anyone know the pull ratios of Zee 10sp and XT 9sp Mechs?

I'm putting a bike together from a load of spares and I'm having difficulty getting a shifter and derailleer to play well. I think the problem is the Zee mech. Does anyone know the pitch/pull ratio in ...
4
votes
1answer
852 views

upgrading an old bike gears and shifter

I don't have a whole lot of knowledge on this, but here goes. I have an old Murray Ultra mountain bike (prob. 15 yrs.+). It is a 15 speed bike, with a 5 speed freewheel. The whole Shimano system is ...
1
vote
3answers
2k views

Front Derailleur Not Working

I recently bought a new bike off of BikesDirect. http://www.bikesdirect.com/products/windsor/wellington2_IX.htm However, no matter what I do, I can't seem to get the front derailleur to do anything. ...
1
vote
3answers
208 views

Are shifters compatible with different derailleurs?

Can I simply choose one shifter without taking into consideration the derailleur that will be used with it and vice-versa?
3
votes
1answer
953 views

9 Speed Road STI + MTB Derailleur

Apologies if this is is obvious or has been answered before. I'm looking at setting up a touring bike, using road STI levers (Shimano or equivalent, looking at Tiagra 3x9 or possibly the Microshift ...
3
votes
1answer
801 views

How can I adjust index shifter so it doesn't skip the second chainring?

I recently replaced my chain and cassette on my commuter bike. It was a first time operation for me, as I am a new to doing bike maintenance. That part seems to have gone fine. While I was at it, I ...
2
votes
3answers
1k views

change derailleur and shifter in an old road bike reconverted to hybrid

I have an old road bike, that I converted to a hybrid bike, I just use it for small tourings. Some time ago I changed the handlebar, the brake levers and the tires. Recently the derailleur broke up, ...
2
votes
3answers
2k views

Front derailleur doesn't seem to be moving

I'm trying to troubleshoot my 24 speed hybrid bike. As it was, the front shifter was having very little effect. I would change gears and not much would happen. When I had a chance to look at it, I ...
1
vote
2answers
864 views

Is it possible to reverse cable direction in Shimano M770 shifter?

I tried to set up the perfect shifter + derailleur. For the last part it is better (for me) to have low-normal version, because reducing gears is essential for me (I bike mostly within city). So I ...
11
votes
4answers
5k views

Why has indexed shifting displaced traditional friction shifting?

I really don't like indexed shifters, at least on the front. They're harder to adjust, more sensitive to cable stretching, and limit the number of gear combinations you can use (because you can't ...
6
votes
4answers
6k views

Bike is shifting on its own

Ever since I got my bike (Surly Long Haul Trucker), it has been prone to shifting on its own. This is almost guaranteed to happen when I stand up on the pedals, and happens regularly when sitting as ...