10 speed Ultegra CS 6600. When I march up and down the gears on the stand it shifts fine. If I test it on the road and march up down the gears it shifts fine. But on a ride if I have been coasting ...
I had installed my front derailleur and was adjusting the high/low when I noticed my rear derailleur was hitting the spokes of my wheel. Suddenly, I saw a screw pop out and then my derailleur popped ...
I recently took apart my rear derailleur as it was on a 10 year old bike and really old and stiff. So I thought I would unscrew both jockey wheels and clean them, they had a silver bit either side, ...
This is a shimano ultegra 6700 rear mech. The swing arm/cage is incredibly stiff where it connects to the derailleur. I can just about rotate (red arrows) it a small amount but requires a lot of ...