Questions tagged [derailleur-rear]
Questions referring to the derailluer responsible for moving the chain along the cassette
601
questions
7
votes
3
answers
1k
views
Devastated- Ribble R872 Ultegra damage to rear dropout
Please see attached photo of damaged frame where rear wheel locks in. The rear derailleur hanger snapped clean off, so it did the job it is supposed to but there is damage to the frame. I’m being ...
3
votes
2
answers
144
views
Vintage derailleur identification
I have a vintage Shimano derailleur that I'm trying to identify, specifically to figure out which jockey wheel set is compatible as mine badly need replacing. The derailleur is marked "Shimano ...
1
vote
0
answers
39
views
New tire tube and grinding noise?
I punctured my tire tube so i had to remove my back wheel out and replaced the tube, when reassembled, derailleurs started making grinding noises.
I checked where the sound was coming and it was ...
0
votes
2
answers
118
views
Granny gear not usable
I have Cyctrac EM5 with SHIMANO DEORE/M6100-12S derailleur. In others gears it's working fine. Here is a video of problem: https://www.youtube.com/shorts/V0Lr_IUTb7c
2
votes
0
answers
48
views
Something like chainsuck on RD lower pulley after new crankset install?
I just switched out a Shimano M5100 crankset for a SRAM GX Eagle crankset. I am using a KMC X11-EL chain. I cleaned the chain before installing it with the new crankset. My RD is a Shimano SLX 11-...
0
votes
1
answer
54
views
Which rear derailleur can I put instead of Shimano Acera
My rear derailleur on Cube Aim Race 29" has broken on the holder. Except for this (and prior to the holder breakage) the derailleur has completely stopped working for some reason. It twists into ...
1
vote
0
answers
68
views
Not able to shift from a specific gear
I have a 9-speed rear derailleur and shifting from 1 to 9 isn’t a problem except when it is from 6 to 7, while downshifting has a bit of lag, upshifting takes forever and sometimes it doesn’t even ...
5
votes
2
answers
891
views
Can I replace a 10 speed cassette with an 11 speed?
I currently have a focus road bike running on Ultegra group set.
The rear wheel is currently 10SP.
I’m looking at purchasing new wheels, and most of the second hand ones come with fitted 11SP. Can I ...
1
vote
3
answers
276
views
Shifter not working in cold weather
My commuter bike has a 7-speed Tourney groupset with thumb shifters. When commuting today, I arrived at the office and shifted down a few gears before parking the bike as usual. I noticed that the ...
1
vote
1
answer
72
views
Shimano rear derailleur compatibility with 13-32 cassette
I have a Freewheel cassette, 9-speed, 13/32T. Currently, I'm using a MicroNew 9-speed RD and a 9-speed shifter, but both of them aren't great, and I want to replace them.
All I can find is the ...
0
votes
0
answers
92
views
Replacement pulleys for Shimano Deore XT RD-M739 SGS derailleur (8sp)
Wondering what replacement pulleys I should get for this type of derailleur.
All details of the derailleur can be found here: https://velobase.com/ViewComponent.aspx?ID=4f90a749-6254-4a37-840d-...
1
vote
1
answer
94
views
How to eliminate flex in derailleur hanger plus Goat Link?
I have a Giant Trance. I have derailleur hanger with a Goat Link to accommodate a large cassette in the rear. Where can I get a custom made derailer hanger made to eliminate the flex with the goat ...
0
votes
0
answers
54
views
My derailleur doesn't go from gear 1 to gear 2 by itself but the rest does
The derailleur doesn't go from gear 1 to gear 2 by itself so I have to manually push it, it works perfectly fine shifting from 2 to 7 but when I try to change the gear to 8, it stays on 7
0
votes
1
answer
195
views
I Have a Triban RC 100 (Small, Women's bike) I am upgrading the cransket to a Shimano 105, do I need to upgrade the entire transmission too?
I have a Triban RC 100 women's road bike and I bent the stock cransket in a crash so I am looking to upgrade to something better. I was thinking of upgrading the cransket to a Shimano Sora but would ...
0
votes
0
answers
50
views
My bike won’t change out of first gear
NoI’ve tried changing the looseness of the H and L screws but my great problem remains the same. It won’t change out of first gear even when I manually put it into another gear. The back derailer is ...
0
votes
1
answer
131
views
Chain repeatedly slips on rear cogs to next higher gear...and sometimes back and forth. What to adjust?
EDIT: Just to be clear, everything has worked fine with the bike and the Kickr up until a few weeks ago (that is, for about six months the combo has worked fine). So something's gone a bit out of ...
3
votes
2
answers
533
views
Replacing a hanger mount derailleur with a direct mount derailleur
I got a low-quality walmart bike for free in decent condition. I am trying to make it rideable. I have given up on the stock derailleur and bought a cheap shimano tourney direct mount derailleur to ...
3
votes
2
answers
1k
views
Can I upgrade my 11-28t cassette to 11-34t with Ultegra 6800 rear derailleur?
I think I am okay here but would be really good to triple check!
My current cassette: Shimano 105 5800, 11-speed, 11-28t
My front chain ring: 52-36t
My rear/front derailleur: Shimano Ultegra 6800, 11-...
4
votes
2
answers
173
views
rear derailleur stuck on first gear after changing rear tire
I am a cycling newbie. My bike has 18 speeds with two chainrings in front and nine in back. I just did my first rear tire replacement. Most of that went well, however when I took it out for a short ...
4
votes
1
answer
302
views
Is it normal for rear derailleur tension to impact front derailleur tension?
I just received a bike from a bike shop. It has a GRX800 front derailleur (FD) and rear derailleur (RD). When taking a look at the derailleur setup to check if it is alright, I found something very ...
0
votes
0
answers
174
views
Which currently available rear derailleur would work as a replacement for a Schwinn Boundary 29 Pro Shift?
I would like to change my rear derailleur. I have a Schwinn Boundary 29 inch, Pro Shift. I am not sure what year. Which currently available derailleur would mount up to the frame and operate correctly ...
0
votes
0
answers
16
views
Claude butler urban rear derailer upgrade
Hi looking to upgrade rear derailer. Currently has shimano tourney tx30 with 3 x 7 set. Can I fit a deore instead?
4
votes
2
answers
662
views
Compatible derailleur/hanger and going 1x
So the green Kona dew plus is my bike. It's an 8-speed with a 11-34 cassette. It came factory with an Alivio 9-speed derailleur. I need to upgrade the rear derailleur because I got hit by a taxi. My ...
4
votes
3
answers
856
views
Is the mechanism that holds a bike to a specific gear in the lever that I use to change the gear or in the derailleur?
I have a big-box-bike 18 speed that I ride around the neighborhood for exercise. Recently it stopped staying in the rear gear I put it in -- I roll the gear selector where I want it, but as soon as I ...
2
votes
1
answer
198
views
Upgrading Shimano Acera 8 speed Rear Derailleur to 8 speed Shimano XTR derailleur
Looking for some help here. I am upgrading Shimano Acera 8 speed rear derailleur to 8 speed Shimano XTR rear derailleur and it appears that because the old 8 speed XTR derailleur has a clip for the ...
0
votes
0
answers
48
views
Chain slipping at specific chainring angle
1x11 road bike suddenly starts “slipping” gears without fully jumping gears. I noticed that, only when pedaling backwards in the bike stand, it happened in 180 degree intervals at a specific part of ...
1
vote
1
answer
99
views
Should the chain go inside or outside of the derailleur cage? [duplicate]
I see there is a lot of confusion about this. Should the chain be leaded through inside of the derailleur cage or outside? Example shown below is correct or not?
https://preview.redd.it/et0gzv72mop71....
3
votes
2
answers
893
views
Rear derailleur not staying on largest gear
When I try to shift up to the largest gear, the derailleur moves up, and the chain moves on to the gear, but then comes back down. Upon closer inspection I found that when I hold the shifter, it ...
3
votes
2
answers
604
views
What kind of rear derailleur is compatible with hanger on my bicycle
I have a Giant OCR (2004). I need to replace the rear derailleur (10 speed long cage - triple front chain ring).
I've attached a picture of the hanger.
What type of derailleur would work with this ...
2
votes
0
answers
56
views
clicking chain on 3rd gear only
Shimano DI2 11 speed XTR on my gravel bike. The 3rd from smallest gear on the cassette makes a clicking sound. Any other gear its fine. Cassette and chain are fairly new. Have reindexed, checked ...
0
votes
1
answer
219
views
Shimano 105 R5800 - Noise on largest cog?
Today, I had a weird problem with my road bike's rear derailleur. During an event (which was a 2-hour climb up an Alpine summit), I got a noise when riding in the smallest gear. It has a R5800 105 ...
1
vote
0
answers
33
views
Compatibility Shimano rear derailleur RD-6300
I have this Shimano 600ax. Due to my stupidness I broke the body of the rear derailleur endings its life. There are other rear derailleurs (RD-6300) on ebay for example but these are very expensive ...
1
vote
1
answer
309
views
How to fix bicycle shifting down twice on a single click
I have a 1x Microshift Advent x system with Dropbars. I replaced the shift cable housing and cable and now it shifts perfectly, however it downshifts twice in the middle of the cassette. This did not ...
2
votes
2
answers
262
views
Tight shifting and handlebar weird stiffness
I got my hybrid bike serviced 2 days back. Before the service, the handlebar used to turn freely, and the shifter was not stiff.
I had given it because the day before something went wrong with the ...
2
votes
1
answer
212
views
Tiagra 4600 trigger shifters, 10-speed 105 RD-5701-GS derailleur and 11-32 cassette compatible?
My Cannondale Quick 1 Carbon has Tiagra 4600 trigger shifters, a 10-speed 105 RD-5701-SS derailleur and a 12-30 cassette.
I would like to change to a 11-32 cassette, and understand that I would ...
4
votes
2
answers
299
views
What do I need to change on the rear derailleur to match with the new cassette?
I'm going to the Alps soon and thought that it is a good idea to change my cassette from 11-30 to a 11-32 (with a fresh chain).
I started with replacing the chain, so I used like 3 different 'chain ...
4
votes
1
answer
926
views
Could I use a Shimano GRX RX400 10-speed shifter with a Shimano Dura-Ace 7900 10-speed rear derailleur?
I am trying to be budget friendly and recycle parts for a new project.
2
votes
1
answer
207
views
Should this bolt be tightened?
This bolt on the left side makes the derailleur move hardly or loosely on the derailleur hanger. I don't know how it should be set. Should I keep it tight or loose?
4
votes
2
answers
242
views
105 R7000 chain rubbing bigger sprocket when pedaling backwards
I am new to this so I wanted to know if this behavior is normal. When I pedal backwards and the chain is on the smallest sprocket I can see that the chain rubs for a second and then does a little jump....
1
vote
0
answers
36
views
Chain goes slack in gear 5-10 and very noisey hum
When I’m coasting downhill >35 kph and chain is in gears 5-10 and I hit a bump the chain goes slack, a very loud irritating hum/vibration sound is emitted from the rear wheel until either I pedal ...
3
votes
1
answer
532
views
Is this a long or medium cage Shimano XT 10 RD-M786-(S)GS rear derailleur?
Update
Thanks for the replies and comments. I finally managed to compare with a new RD-M786 derailleur, and it's a medium size.
I think this is a Shimano XT 10 RD-M786 rear derailleur
but is it a ...
5
votes
1
answer
341
views
What are good ways to remove initial cable slack when replacing rear derailleur shift cable housing?
I needed to change the cable and housing of a rear derailleur lately, and what I usually do to help with the initial cable slack is:
Install the housing end caps on the newly cut housing and strike ...
3
votes
2
answers
434
views
Unmounting a stuck rear derailleur
I am trying to unmount my rear derailleur. However it seems to be seized and I am unsure how to proceed.
See the pictures below.
The current state of the derailleur is as follows:
The screw inside ...
8
votes
3
answers
637
views
click, click, click... new jockey wheels break-in period?
I just replaced the jockey wheels on my 6800 ultegra rear derailleur. I noticed some clicking on a couple of the cogs on the the cassette. Upon further investigation, I discovered it was the new guide ...
0
votes
0
answers
72
views
Shimano Dura-Ace M5 10-speed bar end shifters compatibility
I currently have Dura-Ace M5 10-speed bar end shifters on my triathlon bike. I want to add a larger cassette up to at least 30T. I will need a larger cage derailleur but I am not sure which one is ...
8
votes
2
answers
2k
views
What does this screw do (on my bicycle)?
I was trying to adjust the "H" and "L" screws on my rear derailleur to as to adjust the gears better to a Wahoo Kickr I just set up. However I accidentally gave a turn to another, ...
10
votes
4
answers
3k
views
Is it okay for my rear derailleur to be as "compressed" as this when in the lowest gear on the bike?
Recently replaced the cables on this old road bike. When indexing the cable I notice how compressed this derailleur is and the two cogs are almost touching - it certainly doesn't look right to my ...
2
votes
2
answers
138
views
Using Burley Coho XC on road bike with Magic Speed Release axle
I have purchased a Coho XC trailer to use with my 2021 Orbea Avant H-60 (disc brake) bike.
I ordered a Burley Thru-Axle after following the Burley axle guide, but on attempting to install it (without ...
5
votes
3
answers
1k
views
Can I use a vintage derailleur adapter claw on a modern derailleur
I am restomoding a vintage Hi-C branded Schwinn road bike. There is no derailleur hanger on the drop outs so I am in need of an adapter claw. Can I remove this claw from the old derailleur or is the ...
1
vote
1
answer
254
views
Pulley wheel and washers - Rear derailleur
I bought a 2nd hand read derailleur (Shimano M340) and now I've realized that pulleys wheel have not the metallic cover plates(washers) that Shimano derailleurs pulley wheels always have.
What should ...