Mechanism to move the chain from one sprocket to another.

learn more… | top users | synonyms (2)

2
votes
1answer
104 views

Can I replace my Shimano RX 100 with a Campagnolo group?

I just purchased a Concorde Mistral with Columbus Gara tubing and would like to transfer my Campagnolo group from an SLX frame that is too big. The Concorde frame has a front derailleur mounting ...
7
votes
6answers
2k views

Mechanic says not to use top three/bottom two gears or the chain will throw

I just bought a BTwin Fit 5, all stock, fresh from the distributor, Decathlon. Took it for light pacing at the store and things seemed OK. About 100 metres out the door, I shift up to the top end of ...
2
votes
2answers
126 views

Derailleur twitching in low gears

I had a mild spill today on my new bike, which put the (Tiagra) derailleur cage a little bit out of line. With some bending and eyeballing, I got the two jockey wheels lined up 'almost' perfectly ...
0
votes
2answers
79 views

Upgrading rear derailer and cassette

I recently got what most people would consider a cheap and toy road bike as a gift. It came with very primitive RD and cassette (shimano SIS? I think). I enjoy upgrading my stuff, my question is, ...
1
vote
2answers
198 views

Is it normal for the chain to slip in an 'extreme' gear?

My bike's recently been in for a service so afterwards I checked that all the gears are shifting and working properly. As part of my testing I put some power through the cranks in the photographed ...
4
votes
5answers
256 views

If a derailleur cable snaps on a long ride, how can I keep going?

A couple weeks ago I rode around Crater Lake, a 35 mile ride with over 4500 feet of cumulative elevation gain – the sort of ride you really want functional gears for. The night before my rear ...
1
vote
1answer
120 views

My front deraileur needs adjustment after every ride

I have a Cannondale Women's Adventure 1 that I got this spring and have been riding on local (paved) trails every weekend. I started off riding about 6 miles a weekend and recently have progressed to ...
1
vote
3answers
4k views

Front derailleur won't spring back to lower gears

The front derailleur on my mountainbike sometimes gets stuck in high gears. When this happens and I want to shift down I can nudge it a bit with my foot and it will spring back to the lower gear. I ...
18
votes
7answers
4k views

Is there such thing as an automatic transmission for bikes?

Has anyone ever designed or manufactured an automatic transmission (or automatic shifter?) for cycling? I imagine such a device would automatically change the gearing to allow the rider to maintain ...
4
votes
3answers
10k views

Can I fit a cassette with a larger range with my Shimano Tiagra 10-speed ( GS-4600) derailleur?

I'm currently running a 2x10 shimano tiagra 10-speed drivetrain with a 50/34 compact crankset, a 12-30 rear cassette, and a Shimano Tiagra GS-4600 derailleur (that's medium cage aka road long cage) on ...
0
votes
2answers
106 views

Can I change my 7-speed rear derailleur to an 8-speed?

I bought a 2013 Cannondale Quick 6 Hybrid for my daily commute almost exactly a year ago, and I'm looking to give it some upgrades. It currently has a 7-speed Shimano Altus derailleur, and I was ...
2
votes
2answers
70 views

How much does number of gears matter for a front derailleur?

I need a low clamp 2x10 front derailleur. As it turns out to be a challenge to find locally, I begin to wonder How important is the rear gear specification? What is I get 2x9? How important is ...
0
votes
1answer
64 views

My chain came out of dérailleur frame, but gap seems too small, am I misunderstanding something?

So the chain came off my bike on the way to work this morning, but when I tried to put it back on, it seems like it has also come out of the dérailleur frame, but the gap where it seems to have come ...
8
votes
1answer
6k views

Chain slipping off derailleur jockey (need suggestions ASAP)

Last week, I had to abandon a training ride due to my chain slipping off my rear derailleur jockey. This would only happen when shifting, and most often when either shifting chainrings or shifting ...
0
votes
1answer
48 views

Problem with changing to high gear on the front derailleur on my new Bianchi Spillo Rubino Altus Rigid

It's a 24 speed bike with 3 gears on front (Cranks PROWHEEL 48/38/28T) and 8 on the rear. I rode it today and when I was moving the front gear to 3 to move the chain to the large ring I have to press ...
3
votes
2answers
123 views

Is wear on this derailleur pic normal?

I have had issues with noisey drivetrain and inconsistent shifting despite indexing adjustment. I have found wear on the top jockey wheel cage, is this normal or should the chain not rub here? Does ...
0
votes
0answers
27 views

How to determine what FD is compatable with a hard-tail MTB frame?

I have a Dartmoor Hornet frame and am attempting to install an SLX 2x10 groupset. However the deralleur is FD-M676, which appears to be 'high clamp'. It is not evident from the pictures, but the ...
6
votes
5answers
4k views

Rear derailleur shifting poorly, skipping gears

I've got a Shimano Sora on a 8-gear cassette, and have odd behavior and skipping, shifting under stress. This started with a trip to the mechanic for a tune up which replaced the chain. I had some ...
1
vote
0answers
54 views

Stuck and stiff sora front derailleur

I have a used 2011 trek 1.2 compact road bike with a stiff Sora FD-3400 double front derailleur. Shifter seems very stiff, and when I shift above the second index (trim or third) by accident it gets ...
1
vote
2answers
139 views

Shimano FD-M191 replaced with Shimano FD-M590

just replaced Shimano front derailleur (FD-M191) to FD-M590. And problem appears, on smallest cog chain rubs lightly on left side, and on biggest cog on right side. Just can't lower derailleur more ...
0
votes
1answer
66 views
3
votes
1answer
160 views

Brand New bike, chain slips into spokes on first gear

I just bought my first bike as an adult with the intents of biking to work. This bike is brand new, is the Schwinn Admiral 700c from Walmart. I get it home and whenever I shift into first gear the ...
5
votes
3answers
823 views

How can you identify if a Shimano rear derailleur is medium or long cage?

I have a 2013 Shimano XT rear derailleur. It is part of a 2x10 drivetrain. How can I find out if it is a medium or a long cage one? The picture below shows the derailleur.
3
votes
1answer
131 views

Trek 1.1 Derailleur Hanger

I've got a 2011 Trek 1.1, and my derailleur hanger broke in a crash a few weeks ago. I've tried both a number 5 and number 6 hanger, which are what WheelsMFG has listed, but neither seem to fit. There ...
1
vote
2answers
94 views

Adjusting disk brake positions

I recently got a new bike (below). It's rather latest technology for me. I got it assembled from a supermarket, but had to do almost all the adjustments myself. I don't know what I did wrong with ...
1
vote
0answers
75 views

How can I fix my rear derailleur's B-tension adjustment?

I've noticed that my rear derailleur (Ultegra 6700) will not return to where I've set the B-tension adjustment. Pulling it away from the hanger means it will just stick there, or maybe move back a ...
1
vote
1answer
101 views

Chain Slipping?

I am not the most knowledgeable when it comes to bikes so please bear with me. I have a Claud Butler and after fixing a puncture I decided to ride it. As I was riding, I could hear a sort of rattling ...
1
vote
2answers
211 views

chain getting stuck between chainrings

I have an old Cannondale road bike with Suntour shifters. When I shift from the front middle ring to the small inner-most ring, the chain falls into the gap and binds tightly between the two rings. ...
1
vote
1answer
72 views

Chain brushes derailleur

I just got my ever first road bike, Revenio 3.0. I'm so excited. Already got my ever first road bike injury as well - those damn cleats are hard to unclip, springs on those shiny new pedals are too ...
3
votes
1answer
82 views

Stuck front derailleur

On a ride recently my front derailleur seems to have gotten jammed. The levers wouldn't index and the derailleur itself wouldn't budge. After continuing the ride for a bit, the problem went away on ...
2
votes
1answer
182 views

Can I use a Suntour Cyclone GT Rear Derailleur for a 10 speed Campagnolo cassette?

I'm building up a road bike and have a wheelset with a rear hub that has a Campagnolo Chorus 10 speed cassette. The front derailleur will be a triple and I'm looking into the possibility of using a ...
1
vote
1answer
108 views

Upgrading cassette - what do I need to be aware of?

I'm looking to replace my rear cassette and reduce the tooth count between the sprockets in order to make my gear changes less dramatic. I currently have a 11/26 9 speed SRAM cassette, and a stock ...
1
vote
3answers
310 views

Can I replace the front front derailleur with chain guide?

My front derailleur (Shimano LX T670 / 34.9mm) has been stuck on the highest gear for a couple of weeks now which has got me thinking about how little I use it. To save weight could I replace my front ...
1
vote
3answers
110 views

Can I modify the gearing on a 2009 Jamis Aurora?

I have a stock 2009 Jamis Aurora. I'm looking to modify my gear set-up to make climbing hills with large loads a little easier on my knees, as I constantly find myself wishing I had one or more low ...
1
vote
1answer
117 views

Front derailleur adjustment

I need some advice on properly adjusting the front derailleur (shimano -tourney) of my bike. I did watch youtube videos and stuff on the internet but was not able to adjust it properly. When I ...
3
votes
4answers
299 views

Password protect Shimano Di2?

I'm working on a bike with Shimano Di2 (electronic shifting with servo motors in the derailleurs), and I use the e-tube software on a laptop to configure it. What I would like to do is be able to ...
0
votes
0answers
45 views

Is this FD compatible with this crankset: 2 teeth too litle

I am a proud owner of this guy. The crankset is SRAM S1200, 36/22 and the FD is SRAM X7, direct mount. However, the cage on the FD broke, and I ordered this item in a hurry. 1) Dyna-Sys 10-speed ...
2
votes
1answer
108 views

Will I snap my derailleur? (too large front chainwheel)

I have an old racer (1994 Specialized Epic Allez - lugged carbon) that's in pretty good shape. I brought it to an LBS that's got a pretty good reputation and that I've used before, to change the chain ...
1
vote
3answers
150 views

How do I stop my rear derailleur from rubbing against my chassis?

I have a fairly new Shimano rear derailleur on a cheap department store MTB a friend gave me. Recently the derailleur (particularly the jockey wheels) have started to rub against the chassis in high ...
0
votes
1answer
161 views

Replaced faulty Shimano twist shifter but front derailleur still won't catch 3rd

I have one of the ubiquitous Wal-Mart-sourced Chinese Kent bikes, badged as a "GMC Denali." It came with the Shimano RS41 3x7 twist shifters. The front shifter got to where it would not physically ...
3
votes
3answers
193 views

Can Shimano 600 front derailleur handle 3 chain wheels?

I have a 48-38-28 chainwheel and I wonder if Shimano 600EX Arabesque has enough leeway to accommodate it. If you know another derailleur from the same era that could do it that would be also useful to ...
26
votes
7answers
6k views

What's the efficiency of hub gears compared to derailleurs?

What's the efficiency of hub gears compared to derailleurs. I know that hub gears are not as efficient, a part from being heavier, how much will I loose in performance if I use hub gear?
1
vote
1answer
230 views

derailleur P-screw/B-screw does absolutely nothing

I know dérailleur adjustments are frustrating, but this is the 4th day i'm working on this... i stop working just before the rage kicks in and leave everything to continue another day :) The problem ...
4
votes
2answers
2k views

Is it practical to replace two sprockets on a cassette?

My bike has 53/39T chainrings and a cassette with 12,13,14,15,17,19,21,23,25 sprockets, but I like to ride up steep mountain roads. Is it possible (without great expense) to replace two sprockets to ...
22
votes
4answers
29k views

What are the pros and cons of internal gears?

I've had my hybrid 24-speed for a bit over 3 years now, and just last weekend, when looking for a bike for my wife, discovered internal gears. Suffice to say it blew my mind when I saw 7-speed ...
5
votes
2answers
33k views

How to calculate the capacity of a rear derailleur

It's easy to calculate what capacity of a rear derailleur will be needed based on the size of the big and small chainring and the big and small cog. What about the converse question, how to calculate ...
3
votes
2answers
237 views

When to replace rear derailleurs

What is the typical life cycle of mid-range rear derailleurs assuming no accidents? More precisely, what's the average mileage after which it's better to replace it rather than doing tuning all the ...
2
votes
3answers
441 views

How to protect rear derailleur while mountain biking?

I am a college students, and I live right next to an amazing rocky area (picture below), I bike every day, and while I am getting much better and more confident I still take a pretty hard fall every ...
2
votes
1answer
482 views

Shimano SLX Rear Derailleur with Microshift bar end Shifters

I need to replace my rear Shimano Deore derailleur since it got mangled up in an accident. I'm thinking of replacing it with a Shimano America RD-M662 SLX 9-Speed Derailleur. The bike I have is a 2013 ...
1
vote
2answers
77 views

Looking for a narrow-cage 16T capacity FD

I'm putting a 46x30 chainring with a pretty narrow tread on a frame. On the advice of my LBS I got a Sun XCD double FD, but I'm starting to think it's not right for this application. When I have the ...