Mechanism to move the chain from one sprocket to another.

learn more… | top users | synonyms (2)

7
votes
6answers
2k views

Mechanic says not to use top three/bottom two gears or the chain will throw

I just bought a BTwin Fit 5, all stock, fresh from the distributor, Decathlon. Took it for light pacing at the store and things seemed OK. About 100 metres out the door, I shift up to the top end of ...
0
votes
2answers
82 views

Upgrading rear derailer and cassette

I recently got what most people would consider a cheap and toy road bike as a gift. It came with very primitive RD and cassette (shimano SIS? I think). I enjoy upgrading my stuff, my question is, ...
4
votes
5answers
262 views

If a derailleur cable snaps on a long ride, how can I keep going?

A couple weeks ago I rode around Crater Lake, a 35 mile ride with over 4500 feet of cumulative elevation gain – the sort of ride you really want functional gears for. The night before my rear ...
1
vote
2answers
198 views

Is it normal for the chain to slip in an 'extreme' gear?

My bike's recently been in for a service so afterwards I checked that all the gears are shifting and working properly. As part of my testing I put some power through the cranks in the photographed ...
0
votes
2answers
116 views

Can I change my 7-speed rear derailleur to an 8-speed?

I bought a 2013 Cannondale Quick 6 Hybrid for my daily commute almost exactly a year ago, and I'm looking to give it some upgrades. It currently has a 7-speed Shimano Altus derailleur, and I was ...
2
votes
2answers
71 views

How much does number of gears matter for a front derailleur?

I need a low clamp 2x10 front derailleur. As it turns out to be a challenge to find locally, I begin to wonder How important is the rear gear specification? What is I get 2x9? How important is ...
0
votes
1answer
65 views

My chain came out of dérailleur frame, but gap seems too small, am I misunderstanding something?

So the chain came off my bike on the way to work this morning, but when I tried to put it back on, it seems like it has also come out of the dérailleur frame, but the gap where it seems to have come ...
0
votes
1answer
49 views

Problem with changing to high gear on the front derailleur on my new Bianchi Spillo Rubino Altus Rigid

It's a 24 speed bike with 3 gears on front (Cranks PROWHEEL 48/38/28T) and 8 on the rear. I rode it today and when I was moving the front gear to 3 to move the chain to the large ring I have to press ...
3
votes
2answers
123 views

Is wear on this derailleur pic normal?

I have had issues with noisey drivetrain and inconsistent shifting despite indexing adjustment. I have found wear on the top jockey wheel cage, is this normal or should the chain not rub here? Does ...
0
votes
0answers
27 views

How to determine what FD is compatable with a hard-tail MTB frame?

I have a Dartmoor Hornet frame and am attempting to install an SLX 2x10 groupset. However the deralleur is FD-M676, which appears to be 'high clamp'. It is not evident from the pictures, but the ...
1
vote
0answers
56 views

Stuck and stiff sora front derailleur

I have a used 2011 trek 1.2 compact road bike with a stiff Sora FD-3400 double front derailleur. Shifter seems very stiff, and when I shift above the second index (trim or third) by accident it gets ...
2
votes
1answer
107 views

Can I replace my Shimano RX 100 with a Campagnolo group?

I just purchased a Concorde Mistral with Columbus Gara tubing and would like to transfer my Campagnolo group from an SLX frame that is too big. The Concorde frame has a front derailleur mounting ...
1
vote
2answers
140 views

Shimano FD-M191 replaced with Shimano FD-M590

just replaced Shimano front derailleur (FD-M191) to FD-M590. And problem appears, on smallest cog chain rubs lightly on left side, and on biggest cog on right side. Just can't lower derailleur more ...
0
votes
1answer
67 views

Is this a short cage or long cage rear derailleur? [duplicate]

Is there an easy, objective way to tell?
3
votes
1answer
162 views

Brand New bike, chain slips into spokes on first gear

I just bought my first bike as an adult with the intents of biking to work. This bike is brand new, is the Schwinn Admiral 700c from Walmart. I get it home and whenever I shift into first gear the ...
5
votes
3answers
901 views

How can you identify if a Shimano rear derailleur is medium or long cage?

I have a 2013 Shimano XT rear derailleur. It is part of a 2x10 drivetrain. How can I find out if it is a medium or a long cage one? The picture below shows the derailleur.
1
vote
2answers
94 views

Adjusting disk brake positions

I recently got a new bike (below). It's rather latest technology for me. I got it assembled from a supermarket, but had to do almost all the adjustments myself. I don't know what I did wrong with ...
1
vote
0answers
77 views

How can I fix my rear derailleur's B-tension adjustment?

I've noticed that my rear derailleur (Ultegra 6700) will not return to where I've set the B-tension adjustment. Pulling it away from the hanger means it will just stick there, or maybe move back a ...
1
vote
1answer
102 views

Chain Slipping?

I am not the most knowledgeable when it comes to bikes so please bear with me. I have a Claud Butler and after fixing a puncture I decided to ride it. As I was riding, I could hear a sort of rattling ...
1
vote
2answers
218 views

chain getting stuck between chainrings

I have an old Cannondale road bike with Suntour shifters. When I shift from the front middle ring to the small inner-most ring, the chain falls into the gap and binds tightly between the two rings. ...
1
vote
1answer
73 views

Chain brushes derailleur

I just got my ever first road bike, Revenio 3.0. I'm so excited. Already got my ever first road bike injury as well - those damn cleats are hard to unclip, springs on those shiny new pedals are too ...
3
votes
1answer
85 views

Stuck front derailleur

On a ride recently my front derailleur seems to have gotten jammed. The levers wouldn't index and the derailleur itself wouldn't budge. After continuing the ride for a bit, the problem went away on ...
3
votes
1answer
132 views

Trek 1.1 Derailleur Hanger

I've got a 2011 Trek 1.1, and my derailleur hanger broke in a crash a few weeks ago. I've tried both a number 5 and number 6 hanger, which are what WheelsMFG has listed, but neither seem to fit. There ...
2
votes
1answer
182 views

Can I use a Suntour Cyclone GT Rear Derailleur for a 10 speed Campagnolo cassette?

I'm building up a road bike and have a wheelset with a rear hub that has a Campagnolo Chorus 10 speed cassette. The front derailleur will be a triple and I'm looking into the possibility of using a ...
1
vote
1answer
109 views

Upgrading cassette - what do I need to be aware of?

I'm looking to replace my rear cassette and reduce the tooth count between the sprockets in order to make my gear changes less dramatic. I currently have a 11/26 9 speed SRAM cassette, and a stock ...
1
vote
3answers
113 views

Can I modify the gearing on a 2009 Jamis Aurora?

I have a stock 2009 Jamis Aurora. I'm looking to modify my gear set-up to make climbing hills with large loads a little easier on my knees, as I constantly find myself wishing I had one or more low ...
1
vote
1answer
117 views

Front derailleur adjustment

I need some advice on properly adjusting the front derailleur (shimano -tourney) of my bike. I did watch youtube videos and stuff on the internet but was not able to adjust it properly. When I ...
0
votes
0answers
46 views

Is this FD compatible with this crankset: 2 teeth too litle

I am a proud owner of this guy. The crankset is SRAM S1200, 36/22 and the FD is SRAM X7, direct mount. However, the cage on the FD broke, and I ordered this item in a hurry. 1) Dyna-Sys 10-speed ...
1
vote
3answers
322 views

Can I replace the front front derailleur with chain guide?

My front derailleur (Shimano LX T670 / 34.9mm) has been stuck on the highest gear for a couple of weeks now which has got me thinking about how little I use it. To save weight could I replace my front ...
3
votes
4answers
300 views

Password protect Shimano Di2?

I'm working on a bike with Shimano Di2 (electronic shifting with servo motors in the derailleurs), and I use the e-tube software on a laptop to configure it. What I would like to do is be able to ...
2
votes
1answer
108 views

Will I snap my derailleur? (too large front chainwheel)

I have an old racer (1994 Specialized Epic Allez - lugged carbon) that's in pretty good shape. I brought it to an LBS that's got a pretty good reputation and that I've used before, to change the chain ...
1
vote
3answers
152 views

How do I stop my rear derailleur from rubbing against my chassis?

I have a fairly new Shimano rear derailleur on a cheap department store MTB a friend gave me. Recently the derailleur (particularly the jockey wheels) have started to rub against the chassis in high ...
0
votes
1answer
166 views

Replaced faulty Shimano twist shifter but front derailleur still won't catch 3rd

I have one of the ubiquitous Wal-Mart-sourced Chinese Kent bikes, badged as a "GMC Denali." It came with the Shimano RS41 3x7 twist shifters. The front shifter got to where it would not physically ...
3
votes
2answers
248 views

When to replace rear derailleurs

What is the typical life cycle of mid-range rear derailleurs assuming no accidents? More precisely, what's the average mileage after which it's better to replace it rather than doing tuning all the ...
2
votes
3answers
448 views

How to protect rear derailleur while mountain biking?

I am a college students, and I live right next to an amazing rocky area (picture below), I bike every day, and while I am getting much better and more confident I still take a pretty hard fall every ...
1
vote
2answers
78 views

Looking for a narrow-cage 16T capacity FD

I'm putting a 46x30 chainring with a pretty narrow tread on a frame. On the advice of my LBS I got a Sun XCD double FD, but I'm starting to think it's not right for this application. When I have the ...
1
vote
0answers
105 views

Play in Jockey wheels Sram X7 rear derailleur

I have an SRAM x7 rear derailleur only been using it a few months (through the rain) and the jockey wheels seem in a bad way. There's a lot of side to side play in them and the teeth look sharp when i ...
0
votes
1answer
92 views

how to adjust the derailer - apart from the L/H limiting screws

Pardon my newb terminology. My bike's chain will not stay on the H gear (the big ring) The front derailleur will not allow it. I have loosened the limiter screw out to it's maximum and, still, no ...
2
votes
1answer
73 views

di2 front derailleur braze on for 105?

can di2 front derailleur braze on adapter be used to mount 105 derailleur?
3
votes
3answers
195 views

Can Shimano 600 front derailleur handle 3 chain wheels?

I have a 48-38-28 chainwheel and I wonder if Shimano 600EX Arabesque has enough leeway to accommodate it. If you know another derailleur from the same era that could do it that would be also useful to ...
1
vote
1answer
138 views

Did the Giant Trinity A1 come with a derailleur hanger?

I am putting a bike together and have it all apart but don't see the derailleur hanger anywhere. Did I lose it or did the bike not come with it? If it didn't come with it, why not? Thanks.
1
vote
1answer
232 views

derailleur P-screw/B-screw does absolutely nothing

I know dérailleur adjustments are frustrating, but this is the 4th day i'm working on this... i stop working just before the rage kicks in and leave everything to continue another day :) The problem ...
2
votes
2answers
195 views

Adjusting a triple front derailleur after removing largest chainring

I have a touring/commuting bike with full Shimano 105 -- triple in the front. I just removed the outer (largest) chainring and replaced it with a chain guard. It's easy enough to crank on the limit ...
5
votes
1answer
219 views

Why do some people leave the chain sitting on the smaller sprocket when the bike is not used for a while?

I guess it is something related to the springs in the derailleur. But is it that important?
2
votes
1answer
2k views

What are my options for replacing/upgrading my MTB front mech?

I recently damaged my front mech, a Shimano Acera, top swing, bottom pull, triple chainring. The rear cassette is 8-speed. So I need to replace this front mech. The original Shimano Acera is probably ...
2
votes
2answers
190 views

Chain repeatedly tries to click into place without gear change

While pedalling, every 10 seconds or so, the chain on my bike makes the sound it makes during a gear shift - it "clicks", as if it's clicking into place in the new gear. But there is no gear shift ...
2
votes
1answer
285 views

Can I use friction shifters with a clutch style rear derailleur?

Can I use friction shifters with a clutch style rear derailleur like the 2014 Shimano Deore M615 Shadow Plus? Or does this put extra tension on the shift cable that will cause slips with a friction ...
6
votes
4answers
207 views

Electronic shifters

I have been reading alot about the electronic shifters that are out now, specifically the ones on TREK bikes. I was wondering if they are worth the price, and more importantly how do they perform.
4
votes
1answer
428 views

Derailleur guard on road bikes?

I live in an area with lots of debris, dodgy paving, and rain, and to make matters worse, I fall down sometimes (I know!). The main things that get damaged, of course, are the brake handles and the ...
2
votes
2answers
126 views

Derailleur twitching in low gears

I had a mild spill today on my new bike, which put the (Tiagra) derailleur cage a little bit out of line. With some bending and eyeballing, I got the two jockey wheels lined up 'almost' perfectly ...