I broke a spoke on my rear wheel, and ended up messing with it a bit too much - I may need to get it re-dished. If it's a common market model bike, can I simply take the wheel into my bike shop, ...
I'd like to build a wheelset that would work on my cross bike or my 29er, assuming I had disc brakes on the 29er and rim brakes on the cross bike, is there any way I could use a 130mm hub (that fits ...
I'm trying to buy a front wheel which will work with both disc and rim brakes so that I can use it on my cross bike (with rim brakes) and my mountain bike (with disc brakes) with a dynamo hub to power ...
My bike's front wheel is quick-release (QR), but the rear has a traditional skewer (because of the hub gears). It also has disc brakes, and as you'd expect, there isn't a lot of clearance between the ...
so I am creating a few posts about bearings and wheels, (story so far): how to reassemble mountain bike rear wheel hub and bearings mountain bike freewheel hub stopped rotating I have now got the ...
People say (for example here) that disc brakes are relatively heavy, giving this as a reason for not using them. How much heavier than rim brakes are disc brakes? Is the extra heaviness in the ...
How do I separate disc brake pads after accidentally pulling the front brake while the wheel is off?
The title says it all really. I've taken the front wheel off my mountain bike to get it in my car. When I get it out and try and put the front wheel back on the space between the brake pads isn't wide ...