Bikes that have no gears/shifters, and no freewheel - the pedals are always spinning when the bicycle is moving. Note that fixed gear is not the same thing as singlespeed, which has its own tag.

learn more… | top users | synonyms

1
vote
5answers
465 views

What type of bike is appropiate for my situation?

First off, sorry for being unable to phrase my question more precisely. Currently, I ride a 26" hardtail mountain/trail bike to and from work/university (around 7km each way). Surely, this is not the ...
1
vote
3answers
433 views

Skid on small frame

I bought a new, cheap and maybe nasty fixed gear bike. They were only in sizes 54cm and 56cm, so I had to go for 56cm, even though my road bike is 61cm and I'm 186cm. My first few skidding attempts ...
1
vote
3answers
3k views

What kind of handlebar should go on a fixie to sell it?

I've seen fixies with mtb handlebars, sawed-off mtb handlebars, drop bars, and bullhorns. The fixie I built has drop bars, but I'm wondering if I should change that if I want to sell it.
1
vote
3answers
514 views

Theoretical question about double drivetrain (both-sides drive)

If one were to take a single-speed flip-flop hub, and fit two identical freewheels, and couple them to two identical chainrings (i.e. two drive-side cranks, one on each side of the bike), you would ...
1
vote
2answers
556 views

Does height of bicycle affect the energy we put to ride?

I used a road-bike (gearless) and its height was even not reaching to my waist and I was becoming very tired even after 10 min. of cycling (in city). I remember I have read somewhere that angle of ...
1
vote
1answer
343 views

Building up a frame

I bought a Philips frame off Craigslist for $60, and decided I wanted to build a fixie out of it. I have the frame and a quill stem so far. The bottom bracket has to be replaced because I don't have ...
1
vote
1answer
323 views

Replace solid axle with quick release on Fixed Gear

This goes off a previous question: Quick Release on Fixed Gear Bike Suppose I want to replace my solid axles with quick release skewers on my fixed gear bike. Yes, I am aware that this isn't ...
1
vote
3answers
170 views

Help! Tire Pressure

I have a sorta light weight 54cm fixed gear (18 pounds) and I weigh about 115 pounds. I have a set of continental ultra tires for my 622/14mm (700x23) bianchi rims with standard 20-25 tubes. The thing ...
1
vote
1answer
180 views

When does a trackstand “officially” ends (or how to measure its duration?)

Trackstands (a trick in which a rider, usually on a fixed-gear bike, keeps balanced with zero speed, by pedalling back and forth with minimum displacement) can be employed either on the track or on ...
1
vote
2answers
135 views

Threads visible on axle of rear fixed wheel

See attached photo, I can see the threads on the drive side of my axel. Is this something that I should be worried about? Edit: Other side for reference
1
vote
1answer
217 views

How can I use a small Shimano BB on any frame?

I have a Shimano BB-ES25 bottom bracket and 45T crankset that was removed from a Giant-CRX City with an eccentric hub (it had Shimano Alfine internal hub gears). They have literally never been used, ...
1
vote
1answer
408 views

Will a track wheel work with the dropouts on my frame?

I've got an old 7 speed steel frame. I've ordered a track wheel with a spacing of 120mm. My frame has correct drop outs for it, but does it have the correct spacing? If not, what are my options? ...
1
vote
4answers
1k views

geared to fixied options

I've got a geared bike back tyre that has a dent in the rim. I'm considering a fixed gear conversion. A few points of issue: The bike has small vertical drop outs. The skewer width on the current ...
1
vote
3answers
149 views

fixie brake lever

I've got a bit of a dilemma with regards to brakes on my fixed wheel bike. Currently I've got both brakes on, as standard road levers on the hoods of the drops, but now I'm running fixed instead of ...
1
vote
1answer
279 views

Clicking noise coming from cog on fixed gear

Ever since I put my rear wheel on after taking it off, I have had this constant clicking noise from the cog. Here's what I know: It wasn't always like this. I rode for a few months with no ...
1
vote
1answer
122 views

converting to fixed gear, chain problem

I just got a 16 tooth and tried to put on the old chain, BUT while it fits on the pedal cog (46 tooth), it does not on the rear cog. How can I solve this? a different cog in the back or a different ...
1
vote
1answer
2k views

How do I install a fixed gear cog on a screw-on freewheel hub?

I'm converting my old favorit bicycle to a fixie, but the hub is obviously not made for a fixed gear cog. I've removed the freewheel (not sure if it's called that, the thing that spins backwards on ...
1
vote
1answer
1k views

Will this Retrospec Siddhartha bike suit my needs? [closed]

This is my first question on here so please take it easy :) I will be relocating to Surrey (UK) in 2 weeks due to being offered a new job (as a software developer) and I am thinking of (finally) ...
1
vote
1answer
339 views

Dismounting wheel in a fixie

I have a fixed gear bike, Rocky Mountain Boroughs Fixie (see picture). The chain is very tight compared to any free wheel bike. So anytime the tire gets punctured (unfortunately very often) and I want ...
1
vote
2answers
115 views

Does my fixie need a chain tensioner

I'm building my own fixie (almost a cliche, sorry) and I debating whether or not to buy chain tensioners. I will be riding my bike with a fixed gear most of the time. One of the reasons I ask is ...
0
votes
3answers
5k views

Adding gears to a single speed Cycle

I have a single speed cycle and i want to have minimum of six gears on it, Is there a cheap and good way so that i can get gears on it?
0
votes
2answers
198 views

Trying to build first fixie?

So this is the first fixie bike I would have owned. I am unsure if I want a freewheel one or not so I won't have to constantly pedal. But I was wondering or seeking help for how I could build one by ...
0
votes
2answers
336 views

I'm lost with all the names of bike parts flying around!

Ok so I've been riding bike since I was as young as I can remember. Now I'm 18 and I've been given a fixie. But I know nothing about bikes I've always just ridden them and brought them to a shop when ...
0
votes
3answers
957 views

What are some Routes to riding from Los Angeles to San fransisco?

I'm a fixed Gear cyclist and I'm trying to set up a big ride with a group of friends from Los Angeles to San Fransisco. I am aware this is not an easy ride but we are willing to go, but I'm not sure ...
0
votes
1answer
27 views

ask about size and how to solve it [duplicate]

i just bought and build a BLB classic frameset. size 53 and im using 700x28c wheelset. but after that, my toe clip touching the front wheelset especially when i want to turn right or left. please help ...
0
votes
2answers
1k views

Recommendations on best-value stock fixed gear model?

I am looking for a decent fixed gear model. My whole cycling background is on Mountain Biking, so I don't want to build a fixie with spare parts or convert. I am looking at some out of the box whole ...
0
votes
1answer
75 views

How to reuse a rim after the brake edge has been damaged [duplicate]

My chain fell of and got stuck a few days ago (i ride fixed gear) and made a real mess of my back rim. I noticed 2 marks on the brake edge of the rim where the chain scraped along. they are not very ...
-1
votes
2answers
1k views

Is deep v wheels safer then the standard fixie rims

I'm thinking about getting a new fixie but wonder what size rims I should get. I've heard that deep v wheels are easier to handle then just the standard rim size.
-1
votes
2answers
657 views

I want to buy a fixed gear bike. Which one should I buy? [closed]

This is my first time posting here. I'm 15 years old, I want to buy a fixed gear bike to get to school, job and metro. I live in Montreal,Canada if you wonder... A fixie would be perfect since ...