Bikes that have no gears/shifters, and no freewheel - the pedals are always spinning when the bicycle is moving. Note that fixed gear is not the same thing as singlespeed, which has its own tag.

learn more… | top users | synonyms

2
votes
1answer
49 views

Replace hub from old cassette to new fixed

I have an old mavic race rear wheel where the hub is rusted, but the spokes and rim is in prime condition. Thinking about changing just the hub (reusing spokes) to a fixed flip-flop to use the wheel ...
3
votes
6answers
212 views

Quick Release on Fixed Gear Bike

I recently purchased a fixed gear bike, Kilo TT. I had some fenders lying around, SKS raceblade. I tried to install them on my bikebut noticed that the fenders attached to the skewers. My fixed gear ...
0
votes
1answer
64 views

How to reuse a rim after the brake edge has been damaged [duplicate]

My chain fell of and got stuck a few days ago (i ride fixed gear) and made a real mess of my back rim. I noticed 2 marks on the brake edge of the rim where the chain scraped along. they are not very ...
2
votes
1answer
50 views

Do I have all needed for flip flop swap

Forgive my ignorance, but I have a 2011 Bianchi Pista that I've always ridden fixed. I knew that it had a flip flop hub, but now that I'm looking at it, it appears that I need to actually buy a ...
1
vote
3answers
261 views

Theoretical question about double drivetrain (both-sides drive)

If one were to take a single-speed flip-flop hub, and fit two identical freewheels, and couple them to two identical chainrings (i.e. two drive-side cranks, one on each side of the bike), you would ...
4
votes
3answers
138 views

Building a city/trail bike with a CX frame, what should I consider? [closed]

What would be a good build for a 80% city / 20% trail bike? I recently purchased a Cinelli Mash CXSS frame, I will be mainly riding in the city but wanted to also take it to the trails every couple ...
12
votes
7answers
32k views

How tight should a fixie's chain be?

I ride an SE Lager fixed. How tight should the chain be and what is the best way of measure it? I have a chain tug so I can be pretty accurate in dialling in the right amount of tension. I don't ...
0
votes
3answers
740 views

Adding gears to a single speed Cycle

I have a single speed cycle and i want to have minimum of six gears on it, Is there a cheap and good way so that i can get gears on it?
5
votes
3answers
408 views

Physical limits for a fixie rider

As fixie-biking is really trendy at the moment, i often see fixie riders 'skidding' and stopping their bike by blocking their backwheel. As this only works by shifting the riders weight to the ...
4
votes
4answers
2k views

Learning to ride fixed gear: Clipless or not?

Which strategy is better for learning to ride fixed gear, if you're already comfortable with clipless pedals: Flat pedals at first, clipless after you're comfortable with being unable to coast. ...
1
vote
2answers
105 views

Threads visible on axle of rear fixed wheel

See attached photo, I can see the threads on the drive side of my axel. Is this something that I should be worried about? Edit: Other side for reference
4
votes
3answers
752 views

Fixed Gear Chainring Centering

I have a fixed gear bicycle with a chain that gets periodically tight and loose as I complete a rotation of the pedals. How do I center my chainring so that the chain has even tension throughout?
9
votes
8answers
18k views

What is safer…coaster brakes, regular brakes, or fixed gear braking?

I currently have a 'regular' bike, i.e. a bike with typical brakes but I've been more fascinated recently with single speed and fixed gear bikes. One of the reasons that I've held off on getting on is ...
5
votes
3answers
842 views

Safety of fixies

I am feeling minimalist and hipster, considering buying a fixie. I have never ridden a fixie and cannot gauge the safety of fixies (an important issue for me). I am only considering fixies with both ...
4
votes
3answers
1k views

Cyclocross racing with fixed gear road bike with cross tires

I would like to take part in three local cyclocross races in the coming weeks but have a bike dilemma: Should I convert my track frame to a new fork and put one cantilever brake on it and change the ...
106
votes
20answers
85k views

Why ride a fixed-gear bike?

I must confess, I don't know much about bikes. Until fairly recently, a bike was just that thing that I rode to work each day. I've been slowly learning more about bikes but I still have some newbie ...
1
vote
1answer
102 views

converting to fixed gear, chain problem

I just got a 16 tooth and tried to put on the old chain, BUT while it fits on the pedal cog (46 tooth), it does not on the rear cog. How can I solve this? a different cog in the back or a different ...
4
votes
2answers
852 views

Are there tugnuts made to fit forward facing horizontal dropouts?

Are there tugnuts meant to fit forward facing horizontal dropouts such as those on a Surly Cross Check, All City Space Horse, or Salsa Cassaroll which won't block rack and fender bosses and keep wheel ...
1
vote
1answer
611 views

How do I install a fixed gear cog on a screw-on freewheel hub?

I'm converting my old favorit bicycle to a fixie, but the hub is obviously not made for a fixed gear cog. I've removed the freewheel (not sure if it's called that, the thing that spins backwards on ...
-1
votes
2answers
886 views

Is deep v wheels safer then the standard fixie rims

I'm thinking about getting a new fixie but wonder what size rims I should get. I've heard that deep v wheels are easier to handle then just the standard rim size.
4
votes
2answers
561 views

'Best' Gear inch to start with on a fixed gear? Moderatley hilly area

For a starting fixie rider, what is there a 'best' Gear inch to start with? Moderatley hilly area. Edit-just got done with the build, a 70's Motobecane 77.6 GI, (46x16/27" wheels/ 165mm cranks.) now ...
1
vote
2answers
360 views

Does height of bicycle affect the energy we put to ride?

I used a road-bike (gearless) and its height was even not reaching to my waist and I was becoming very tired even after 10 min. of cycling (in city). I remember I have read somewhere that angle of ...
8
votes
3answers
774 views

Is it normal for a fixed gear bicycle's rear wheel to slip forward in its dropouts from time to time?

My fixed gear bike has a track fork with a chain tensioner, and uses Pitlock's solid axle nuts to secure the wheel in the dropout, though I had similar issues with the stock nuts. After tightening ...
2
votes
1answer
105 views

Fixed gear conversion - hub spacers

I am converting my 80s steel peugeot to a fixed gear. I have purchased most of the parts an had a wheel built onto a SS hub. Now, SS hubs are narrower than road hubs - 120mm vs 130mm (although I ...
2
votes
2answers
967 views

Planning on building a fixed-gear/single-speed from an old Schwinn World. What new parts will I need?

I think I want a flip flop hub, to keep my options open. If I get one off amazon, do I need to buy a freewheel and fixed-gear cog as well, or will those come with the hub? Also, does the hub have to ...
1
vote
1answer
590 views

Will this Retrospec Siddhartha bike suit my needs? [closed]

This is my first question on here so please take it easy :) I will be relocating to Surrey (UK) in 2 weeks due to being offered a new job (as a software developer) and I am thinking of (finally) ...
5
votes
5answers
980 views

Fixed gear wheel hard to spin

My wheel feels harder to spin than usual. I just put new tires on, and at first I thought a tire must be rubbing, but that's not the case. Seems like the hub might just be gunked up inside, but I'm ...
6
votes
2answers
1k views

Can one replace double chainrings with a singlespeed chainring on the original crankset/spider?

I have an 80's Peugeot steel-framed racer that I want to convert to singlespeed/fixed. It has a standard square-taper BB with a double chainring chainset. I can see the chainrings are removable from ...
1
vote
5answers
448 views

What type of bike is appropiate for my situation?

First off, sorry for being unable to phrase my question more precisely. Currently, I ride a 26" hardtail mountain/trail bike to and from work/university (around 7km each way). Surely, this is not the ...
7
votes
3answers
835 views

Fixed gear Biking, how to ride properly?

I Have been riding bikes since I've been 6 years old, and I don't mean riding up and down the street - I mean touring with my sisters for 10-20 Km. Later on, I really got into Downhill. Over time I ...
5
votes
4answers
3k views

Quiet and strong chain recommendation for fixed gear commuter bike

I went through a couple of chains on my fixie bike, but I was not too happy with any of them. Basically they seemed pretty noisy when more pressure was applied where cycling. Could you recommend one ...
-1
votes
2answers
497 views

I want to buy a fixed gear bike. Which one should I buy? [closed]

This is my first time posting here. I'm 15 years old, I want to buy a fixed gear bike to get to school, job and metro. I live in Montreal,Canada if you wonder... A fixie would be perfect since ...
0
votes
2answers
296 views

I'm lost with all the names of bike parts flying around!

Ok so I've been riding bike since I was as young as I can remember. Now I'm 18 and I've been given a fixie. But I know nothing about bikes I've always just ridden them and brought them to a shop when ...
2
votes
2answers
162 views

Is it ok to use fixed gear threads for a freewheel?

I have a fixed/fixed flip-flop hub and the lockring threads are stripped out on one side. Would I be ok to just thread a single-speed freewheel on that side and use it as a fixed/free hub?
6
votes
7answers
1k views

Fixie Vs Urban bike for small-distance commuting

My daily commute is a 1.7km long, almost straight line with minimal slope. Since I have no other method of private transportation, I am thinking of getting a bike and have come up with two interesting ...
2
votes
3answers
372 views

can a single sprocket be locked on a road bike?

I have a univega and a fixie. i love the idea of fixed gear bikes but live in a very hilly area which requires more than just one gear. Is there a way to combined those two ideas into one awesome ...
6
votes
3answers
8k views

How do I change my single-speed to a fixed gear?

I've been biking on single-speed for a few months and would like to play around with a fixed gear. I've heard of a flip-flop hub, but I'm not sure exactly what it is. And without any fellow bikers - ...
2
votes
1answer
1k views

Why does my non-drive side crank arm come loose?

I tighten the bolt super hard. Ride for a while. Then it comes loose again. I don't know if its my BB or the bolts. How can this be fixed??
0
votes
2answers
1k views

Recommendations on best-value stock fixed gear model?

I am looking for a decent fixed gear model. My whole cycling background is on Mountain Biking, so I don't want to build a fixie with spare parts or convert. I am looking at some out of the box whole ...
3
votes
1answer
204 views

Checking fixie for damage

This morning during my morning commute I had an unintended lesson in fixie skidding: I dropped the chain, it got stuck between the cog and the hub and locked the wheel. I'm not sure where that skill ...
0
votes
3answers
468 views

What are some Routes to riding from Los Angeles to San fransisco?

I'm a fixed Gear cyclist and I'm trying to set up a big ride with a group of friends from Los Angeles to San Fransisco. I am aware this is not an easy ride but we are willing to go, but I'm not sure ...
3
votes
8answers
6k views

What are the parts needed to build your own fixie?

I've always wanted to build my own bike and I figured that a fixie has the least number of parts. Please post one part per answer. Please explain what I should be looking for in the part. Also please ...
10
votes
7answers
3k views

isn't a fixie without a full chain guard a safety hazard?

Yes, I know it would totally ruin the clean lines and the uncluttered, (well maybe just a discreet front brake), looks, but I've never seen this question asked, much less answered. A chain guard ...
4
votes
4answers
2k views

Fixed-gear bike: How to ride backwards?

I have flipped over my hub to try out the fixed wheel for a change, I am finding it very difficult to keep balanced while attempting to ride backwards! Does anyone have some advice or is there any ...
5
votes
2answers
4k views

Fixed gear: slipping

I have a single speed bike with a flip-flop hub and recently I decided to try out the fixed side. When testing it out in the car-park I was applying backpressure to brake and found sometimes the ...
9
votes
4answers
10k views

Front brake only on a fixed-gear bike

Is it considered safe-enough to only have a front-brake on a fixie in a urban area that has many hills? I've been considering buying one, but I want to get some opinions before I move forward.
1
vote
1answer
181 views

How can I use a small Shimano BB on any frame?

I have a Shimano BB-ES25 bottom bracket and 45T crankset that was removed from a Giant-CRX City with an eccentric hub (it had Shimano Alfine internal hub gears). They have literally never been used, ...
2
votes
2answers
4k views

How do I figure out which size chain my fixed gear bike has

My fixed gear bike is going to want a new chain soon, how do I figure out which width I should use?
3
votes
3answers
6k views

What things should I look for when purchasing a fixed gear bike?

What features are important or of note? What are appropriate prices to pay? Are there specific brands which provide a clear advantage over others?
5
votes
1answer
2k views

Rear dropout adjustment screws on fixed-gear conversion

I have a Surly Cross-check that I absolutely love and adore to pieces. I've also converted it from a geared bike to a fixie and am wondering if I still need the adjustment screws (see picture, in case ...