I have an 80s cyclocross frame I am restoring. The fork's cantilever bosses are spaced at 55mm - much narrower than the modern standard (around 70mm I believe). I tried to fit a pair of Tektro ...
I thought this would be simple. The problem is that the entire brake assembly needs to be rotated to screw into a thread built-in to the fork. There's also a hex/allen hollow tube-nut at the back ...
I've recently got a new bike with a Kinesis DC07 carbon/alloy fork. This comes with deep-drop calliper brakes (Shimano R451 Dual Pivot). The first time out I bumped one of the brakes and it twisted ...