Usually means the front fork, where the front wheel sits. Can also mean the rear fork, a part of the frame.

learn more… | top users | synonyms

1
vote
1answer
34 views

Pre-load of suspension forks on one side only

I have a question about suspension forks that have a pre-load knob only on one side. I believe having it on one side only is not uncommon, and the other side is often equipped with a lock-out knob. ...
7
votes
1answer
14k views

What maintenance does a front suspension fork need?

I've just bought a used bike on eBay, its a 2002 Marin Bobcat Trail. It has 'In-Sync 266' suspension forks. This is my first suspension bike so I need some guidance in the use and maintenance of these ...
0
votes
0answers
24 views

I self serviced my front-suspension - now its not bottoming out

So to clarify, I followed the instructions from RockShox about how to service my front-suspension. Serviced both my upper and lower legs. Swapped some of the o-rings and seals. Added the designated ...
1
vote
1answer
48 views

Right fork mounting point

I was given an old racer frame and some parts which I am converting into a single speed commuter. The front right fork has a small toothed mounting point, it looks a bit like it could have held a ...
1
vote
2answers
80 views

Retrofit lockout for a suspension fork?

I am new for cycling. I am searching for bikes on which I will ride mostly on roads, but also on terrains/mountains occasionally. After doing a few researches online, I finally decided to buy a hybrid ...
0
votes
3answers
120 views

Headset fully tightened, but fork still loose and wobbly [duplicate]

I'm almost done assembling my new bike :) There is still one thing in the way though... See the headset in the picture? It was installed by a professional (or, at least a LBS owner) when I bought the ...
0
votes
2answers
89 views

Is the bike i'm using right for Mountain Biking?

Im not exactly down with the terms used in MTB, I have recently bought a new bike. It was within my price range and its great for riding on the road and forest trails. Its a "Carrera Hellcat II ...
0
votes
1answer
271 views

Fox Float CTD Evolution vs Fox Float CTD Performance

What is the difference between Fox Float CTD Evolution and Fox Float CTD Performance? Except that one is most expensive and better? I mean real difference...
0
votes
1answer
61 views

Rebound doesn't work on a Rock Shox Recon Air

On my Trek Fuel Ex6 I have a Rock Shox Recon Air fork with rebound valve. The valve has a 2,5mm allen key for adjustment, but it seems broken. The Trek Suspension Setup Guide tells me to set the ...
1
vote
2answers
661 views

Cantilever brakes for older narrow fork bosses (55mm)?

I have an 80s cyclocross frame I am restoring. The fork's cantilever bosses are spaced at 55mm - much narrower than the modern standard (around 70mm I believe). I tried to fit a pair of Tektro ...
0
votes
2answers
161 views

Building an Entry Level MTB. How should I choose suspension forks?

I am new to Mountain Biking. I just bought a CRONUS HOLTS 330 (Hardtail) with Shimano gear system and disk brakes. Its a 19" frame with 26" tyres. All aluminium pretty light weight. The brakes are ok ...
0
votes
0answers
45 views

Front rack is not straight with fork, is this normal? And how can I fix it?

I just received a Racktime TopIt front rack and installed it on my bike. It is heavily angled to the right, which is bad enough on its own right, as it looks pretty bad...but worse yet, because I ...
0
votes
1answer
36 views

Changing to rigid fork on C-dale Killer V 900 w 1.5

I have a 90s era Cannondale Killer V 900., Believe it has the Headshock fork with the shock directly below the headset. I am converting the bike to an electric commuter (please dont hate me or just ...
1
vote
1answer
85 views

Swapping a road bike frame for a bigger one?

I happened to be given a decent bike - Trek 1000 - in a good condition. The only problem is that the frame is only 56 cm while I am quite tall so I need ~62 cm. Is it possible to take all the nice ...
0
votes
1answer
69 views

How to calculate rigid fork replacement for suspension one?

Let's say I am reading spec for 29er with suspension fork and I would like to calculate replacement parameters for rigid one. Calculation is needed because I don't want to change geometry after ...
0
votes
1answer
47 views

Front wheel Fork is having scratches and Oil is getting leaked from it?

I thought that it might be a fault of Oil seal but Mechanic was telling that I have to replace both the fork If I replace only the Oil & Oil seal then again It will leak oil. Is it a dangerous ...
1
vote
1answer
51 views

Having the fork blades aligned

I got a classic steel road bike, gazelle tour de France, and one of the fork blades was bent in the frame direction, some two centimetres, after a crash. I read here that this can be realigned, I'd ...
0
votes
1answer
32 views

Torque for front caliper bolt. [duplicate]

What's the recommended torque of the front caliper bolt for a carbon fork? The Fork is from a Felt F1. I don't want to damage the fork from over thightening.
0
votes
2answers
2k views

Tapered fork into 44mm head tube?

I have a MTB Ghost SE 2000 frame which has a 1 1/8" head tube. I just measured it and it has a 44mm diameter top and bottom. I want to replace the stock fork. However it is hard to find non-tapered ...
0
votes
2answers
426 views

Upgrade suspension on hard tail MTB

I have a Suntours xcm (spring 80mm) on my hard tail. I drive more frequent and more pretentious. So I consider to upgrade my fork. How can I tell if I need a better one? What can a good air-suspension ...
0
votes
0answers
67 views

Replacing Suntour M3010 with rigid fork (sag and measurements)

I have an entry level Giant Revel 3 (2014). The Suntour fork is horrible. But, I like the frame and, to me, it's worth doing a couple of minor things. I use the bike for communiting and, from what I ...
0
votes
2answers
73 views

What fork will fit my bike? [duplicate]

I have this bike: http://www.bikebarn.co.nz/2015-merida-big-nine-20d-white.html I want to swap out the forks for some rigid forks. Please tell me what specs I should be looking at to get the right ...
2
votes
2answers
161 views

Safe steerer spacers stack height

I'm building my first road bike, which means I'll have to find appropriate bar height through personal experience and cut the fork steerer in process at least once. I plan to start with the following ...
1
vote
1answer
160 views

Is there more than one type of tapered steerer?

I have a set of forks (Rock Shox XC/30/TK on a Focus Black Raider 2.0 2012) that measure 30mm at the bottom and 28.6mm at the top, (or 1 3⁄16" to 1⅛" in pre-enlightenment measurements). So they're ...
-1
votes
3answers
166 views

No non-sus 29er mtbs? [closed]

So I sat down and said "what kind of a bike do I want?". I ride mostly in the city, but I wanted something that I could take out to the trails. I don't do anything crazy... maybe a 2' drop at the ...
1
vote
0answers
216 views

Rigid fork replacement for Rock Shox Bluto fat bike suspension fork? [closed]

I'm considering the purchase of a fat bike with a Rock Shox Bluto Fork. This fork takes a 150x50mm Maxle Light and 150mm hub. However, since winter is coming and I'll likely be riding in slop and ...
0
votes
0answers
56 views

How to clean and lube SR 29 XCM-HLO fork?

I want to clean and lube my fork , and found this video on youtube ...
2
votes
1answer
75 views

Carbon fork torque

I notice that my fork is squeezed together when I tighten the quick release mechanism. Is it possible then to over torque the quick release and squeeze the fork too close together?
8
votes
1answer
1k views

Hard fork and low tire pressure or viceversa?

With mountain bikes, what do you think is more efficient: highly preloading the fork and using low tire pressure or having a "bouncy" fork and hard tire pressure? I like to have the fork with quite a ...
2
votes
3answers
365 views

Rockshox Quadra 21R — Removal tips for old brittle elastomer

I am tuning up the mountain bike I purchased in 1994, which has the old yellow Rockshox Quadra 21R front suspension fork. I have found a nice video on YouTube which shows how to service the ...
1
vote
2answers
130 views

Wheel Wobbles and Rubs on Brand New Bike?

I just got a brand new bike and it came partially assembled in the box. I don't have a whole lot of experience when it comes to working on or building bikes but I managed to put it together. theres a ...
2
votes
1answer
489 views

Are single-sided forks a gimmick? [closed]

The first time I saw a Cannondale with a one-sided fork I was in shock & awe. But I got to thinking about it, and it seems to me like it's just a marketing strategy, touting the quality and ...
2
votes
3answers
151 views

Inflating airspring fork with Topeak products

Today in receipt of a Topeak "Pressure-Rite Schrader Valve Adapter" to inflate my airspring fork, thinking it would work perfectly with my Topeak "JoeBlow Pro" floor pump. It doesn't work very well, ...
3
votes
4answers
4k views

Badly rusted suspension fork

I have a $300 MTB used for commuting. It has been three years now, and the rain and snow have said their word. Two weeks ago I disassembled the fork and spent a good one hour with the sandpaper, ...
-1
votes
1answer
86 views

I need help planning my bike renovation!

I'm planning on buying this bike online and making it, well y'know, mine. And to do this, I would like to make it look like an Aristotle bike. So I'm basically am going to need new rims to start and a ...
0
votes
3answers
95 views

Are front forks supposed to pull to centre?

So I took my bike in to the repair shop, to have the rear wheel replaced, but after the repair I noticed immediately the steering feeling a bit strange. I've since worked out why. The problem is that ...
0
votes
1answer
157 views

SR Suntour XCM v3 forks Headset

Currently building a new mountain bike and for the time being I'm using the old forks until I buy some new ones. My question is how do I find out what type of headset I need? Because from my ...
6
votes
1answer
280 views

Why would higher fork contribute significantly to breaking the frame?

When I recently cracked my frame near the headtube, every bike shop that I went to, asked me explicitly "Did you put a longer travel fork?". Putting aside that apparently fork travel and fork crown ...
5
votes
4answers
1k views

What is the advantage of a reverse arch suspension fork?

There are a couple of suspension fork manufacturers that have adopted a fork design where the lowers have a reversed arch. I can't see that they claim any particular performance advantages for it, ...
3
votes
2answers
124 views

torque specification on headset

I was wondering why there is a torque specification on the steer tube end of the stem for mountainbikes. The torque specification that goes to the handlebar is reasonable, after all handlebars are ...
17
votes
5answers
2k views

Is front-suspension a false-economy for cheaper bikes?

I'm a 30 year old male looking to purchase my first non-department store bike. I haven't biked in more than a couple years. My use-case is 90% asphalt (inner-city, occasional low-speed highway) and ...
1
vote
0answers
127 views

Lowrider style bent forks techniques

Would a 24 inch bent fork fit on a 20 inch frame? Is there even a 24 inch fork? Would a 26 inch fit? Also if it doesn't fit in could I just add to the 20 inch - would you be able to extend it making ...
3
votes
2answers
804 views

Dual position air, solo air, coil, rebound: what do they mean about forks?

Lyric is available as Dual Position Air/ Solo Air / Coil. What do those terms mean generally? My speculations are leading me nowhere. If Dual Air means no hydraulic cylinder, how can the fork have ...
0
votes
1answer
502 views

Replace 140mm fork with 160mm on Remedy 7 27.5 possible?

I'm Curious about whether it's possible or whether Remedy's frame is designed for such a replacement. Some bicycles makes it possible to upgrade to longer forks. I searched in Google, some people say ...
2
votes
2answers
135 views

I need to change my fork after having an accident with my bike

I need help as I need to change the fork for my bike (Ridgeback Speed 2013 Womens Hybrid Bike) I live in London and I went to few shops but in all of them they need to order the fork and it will cost ...
0
votes
1answer
113 views

Help with pairing the right headset to a new 3T fork

I recently purchased an Aventon Mataro (http://aventonbikes.com/track/) frame and a 3T Funda Pro with tapered fork (1 1/4' - 1 1/8' 1.25 ). I've been trying to figure out which headset I need to fit ...
4
votes
3answers
4k views

Why isn't my suspension bouncy?

I recently bought a Carreras centos limited edition mountain bike. I want to find out how to make my suspension bouncier and I want to experience a MUCH more comfortable ride. I have tried fiddling ...
0
votes
1answer
375 views

Dual air forks negative positive chamber pressure equality

Regarding solo air forks everything is clear. Once we bumped both chambers pressure is equal. But why for dual air forks air pressure doesn't try to get equal in both chambers? What's the point of ...
1
vote
1answer
145 views

What is the problem with my suspension fork?

I have a Manitou Skareb. I think it is a 2005. It was working fine the last time I rode it. I pulled the bike out after about 1 month of not riding and I could push the fork down about 1.5 inches with ...
2
votes
3answers
162 views

Bike type xc ht or cx? [closed]

I am a newbie on bikes and i want to buy one. I want to buy a bike that i can cover some small city road distances ~30km daily with comfort and to be able to go on some mountain trails when i got time ...