Usually means the front fork, where the front wheel sits. Can also mean the rear fork, a part of the frame.

learn more… | top users | synonyms

1
vote
1answer
130 views

Can a bent hub damage my fork?

I've recently noticed that my front hub is bent, or at least the parts that connect to the fork (any name for this?). It's not a huge bent, but it's clearly visible with your eyes. It fits the fork ...
1
vote
1answer
157 views

Will this fork crown race installation tool work?

I am looking to purchase a fork crown race installation tool, ant this one is the only one available online. The IceToolz thing is "to be delivered" someday. I am very skeptical of this tool, as it ...
2
votes
1answer
127 views

Spreading a steel front fork

Has anyone got tips on spreading an old steel front fork to fit a more modern hub? I've got minimal tools. I thought a car jack might be a good way to go..
2
votes
2answers
317 views

Fork replacement for SR Suntour 29er

I ride pretty aggressively cross country and trail in colorado, and occasionally will go to the bike park and do some jumps. I recently bought a specialized hardrock 29er for my wife, who's a novice ...
1
vote
1answer
320 views

Fox Talas full travel not reachable

Last 20 mm of my new Fox 32 Talas 29" 130mm 2013 fork is not possible to reach. It gets quickly hard before the full travel. It is ridden for 150 km so far. Tested both on trail (hitting rocks on hard ...
13
votes
4answers
34k views

What is the “preload” setting on the front fork suspension?

I've made a photo of the actual "thing" as I find it very difficult to explain otherwise: I'm wondering what this "thing" sets and how it actually works. So, what is "preload" and what happens when ...
1
vote
1answer
104 views

Difference between high and low pressure air springs?

I've just been adjusting the spring pressure on my Rock Shox SID XX fork and then adjusted my Manitou Minute Expert because I had the pump out. The SID has the solo air spring and needed 115psi and ...
5
votes
4answers
879 views

Disc brake rotor size and forks strength

I have been told that every fork has a maximum rotor size characteristic. For example, for my $75 Suntour this is listed as 185mm. The explaination that I have been given for this limitation is that ...
0
votes
1answer
516 views

Fort bicycles company from Czech Republic: Where are the steel frames? Company renamed?

There is or was a company from Czech Republic that produced steel frames and forks. The name of this company is or was Fort. Why can’t I find anything about this company or their steel frames and ...
1
vote
1answer
299 views

Pannier rack bag for a not suitable suspension fork (Btwin Rockrider 5.1)

I ride a Btwin Rockrider 5.1 with a baby seat, and want to attach one or two pannier rack bags. I guess I only can put it on the front wheel because of the baby seat which goes over the rear wheel, ...
0
votes
2answers
209 views

Fork slider caps worn out. Replacements?

I have this fork and the plastic slider sleeves have worn out. Can I purchase replacements. The service manual says those are among the "wear-and-tear" parts.
9
votes
2answers
5k views

Cannondale Lefty DLR Ti Fork Rebuild/Maintenance

I have a mountain bike with a 2003 Cannondale Lefty DLR Ti fork. As I've been riding the bike this season, I've noticed that the fork is behaving strangely. It doesn't seem to lockout fully and it is ...
1
vote
1answer
66 views

Deepening the front fork dropout

I have an old 27" road bike in a long, lazy and cheapish process of restoration. I'd like to put 28" wheels on, which requires 4mm longer brake reach. The bicycle used to have fenders and the existing ...
0
votes
1answer
226 views

Oil specs for the 2013 Totem RC2 DH DPA

Does anyone know the oil specs for the 2013 Totem RC2 DH DPA fork? On http://www.sram.com/rockshox/products/totem-rc2-dh the "Technical Manual - RockShox Front Fork Oil Chart - 2011 (44.85 KB)" only ...
2
votes
1answer
331 views

Fork Adjustment

When I ride into my new bike the fork doesn't shrink. My weight is about 81kgs. I think good forks usually shrink to 75% of its length. In my case it does not shrink at all. The fork is cheap. Does ...
10
votes
4answers
2k views

Is it safe to remove “lawyer tabs” on a carbon fork?

Is it safe to file off the "lawyer lips" - the little tabs on the end of the fork dropouts - on my carbon road fork? What about cyclocross forks? I've heard it's "common sense" to remove them...
0
votes
1answer
258 views

What is a Q-LOC axle? Is it compatible with Quick Release?

So what is a Q-LOC axle? If I decide to install a fork with such an axle, do I need another front wheel or is is it possible that my current QR hub is compatible. What do a Q-LOC wheel look like and ...
0
votes
1answer
306 views

Choosing a long-travel cross-country fork

I ride hard-tail cross-country for recreation (Specialized Hardrock with disc brakes). Recently, my fork got damaged and now I am looking for a replacement. My current(now previous) fork has 80mm or ...
3
votes
3answers
1k views

When is using a suspension fork worth it?

I've recently picked up biking again since my childhood years, so I'm quite the newbie. I've figured out most of the features I'd need so far but I'm at a loss at this one. Why would you pick front ...
5
votes
1answer
2k views

Suspension fork - Can you leave them locked for a long time?

My bike's two years old (about 1800km on it, almost all road and bridleway) and kept in a garage. Back in November or so I locked the front suspension fork for road-riding, and over the winter ...
2
votes
1answer
181 views

How can I fit this mudguard?

I thought this would be simple. The problem is that the entire brake assembly needs to be rotated to screw into a thread built-in to the fork. There's also a hex/allen hollow tube-nut at the back ...
1
vote
2answers
380 views

What torque for caliper brakes onto carbon-alloy forks?

I've recently got a new bike with a Kinesis DC07 carbon/alloy fork. This comes with deep-drop calliper brakes (Shimano R451 Dual Pivot). The first time out I bumped one of the brakes and it twisted ...
0
votes
1answer
93 views

Missing a part from an internally threaded steer tube

I recently obtained and then disassemble a Kink Co. BMX. It had a threadless headset. Unexpectedly, instead of having a star nut inside the fork's steer tube, the steer tube was internally threaded ...
1
vote
3answers
626 views

If I replaced the fork on my cyclocross bike with a track fork, what would be the effect on the bike geometry?

If I replaced the fork on my cyclocross bike, surly cross check, with a track fork, what would be the effect on the bike geometry? What would be the effect of the modified geometry on bike handling. ...
5
votes
1answer
737 views

conversion to rigid fork

Is it possible to put a rigid fork onto a 120mm travel hardtail without upsetting the handling? I used to ride a Kona P2 fork on a 96 AA frame, which I suppose was designed for a max. of 100 mm ...
1
vote
2answers
1k views

Installing a compression plug

I am currently building a bike up. I have a carbon fork, with a carbon steer tube, and I have to install it using a compression plug. I picked up one of these this morning: ...
3
votes
2answers
252 views

Trying to build a bike, confused about fork/headsets/compatability

I have a fork with a 1" steerer tube, and a frame with a 1.5" head tube. The steerer tube is slightly short, and when inserted into the frame, is flush with the top of the head tube. The fork is ...
7
votes
3answers
10k views

How do I choose a bicycle fork?

I'm putting together a bicycle on a budget from a frame I was given and various parts from a bike with a broken frame. The only part of any expense that I really need is the fork, and I want to get ...
3
votes
1answer
995 views

Is it possible to replace a 1 1/8 steering tube with a 1"?

I have a 94 Giant ATX. Threaded 1 inch steeering tube. I need a shorter stem, and would also like to install a suspension fork. Is it doable? Could I take a modern suspension fork, heat the crown, ...
1
vote
3answers
976 views

Is it safe to ride with bent fork?

My bicycle went from this when I bought it: To this when I crashed (note the front fork bent where it attaches to the stem; front wheel almost touches the down tube): Update: Just looked at the ...
5
votes
4answers
1k views

Frozen suspension in the winter

Winter is coming! Last season I put my road bike in the garage and just road my mountain bike all winter. Something strange happened: My suspension fork froze. When spring came everything ...
-1
votes
1answer
414 views

Fork MTB clearance problem

I have a felt Nine comp. It is a 29er with rockshox forks. The clearance is poor with a continental rubber queen tyre. Is there anything I can do to increase the clearance? (we're talking 1cm, which ...
2
votes
2answers
879 views

Any wheel on any fork / frame?

I have been braking for a bit too long with worn off brake pads on not so new rims so I basically killed them. I currently have the stock wheels of an FX Trek 7.2 bike. I will most probably change ...
5
votes
2answers
955 views

Can a steel fork be unbent?

I was hit by a car and now the steerer of my Reynolds 753 aero fork is bent. Is it possible to bend them back? Would that be safe? I can't afford a new pair!
1
vote
3answers
324 views

What's the beefiest front shock (26"), avail in quick release, with travel of 100-125mm (no more)?

Details: I mostly enjoy XC and all mountain riding. However, I also from time to time, will go out with friends on some much more intense downhill trails. I'm also about 240 pounds, give or take. ...
2
votes
1answer
209 views

2009 Boxxer Team Dual Crown - Are springs different from 2010 + models?

I have a 2009 boxxer team fork on my bike. I'd like to buy the firmer spring as I am heavier than the last owner. Can I put the spring from a 2010/2011/2012 boxxer in there or was there something ...
2
votes
1answer
407 views

Suspension Fork Axles

I'm looking to upgrade my suspension forks from Rock Shox Dart 3 to something like Rock Shox Sektor RL. A lot of the forks have either a 15 or 20 mm axle, or 'Maxle'. What does this mean? Will this ...
0
votes
1answer
298 views

Front suspension fork woes

I recently bought a preowned Saracen Havoc 2000 (Team Saracen edition) and had to replace the original forks (Zokes branded double crown) as they were seized solid. Replaced them with an old but ...
7
votes
2answers
11k views

What maintenance does a front suspension fork need?

I've just bought a used bike on eBay, its a 2002 Marin Bobcat Trail. It has 'In-Sync 266' suspension forks. This is my first suspension bike so I need some guidance in the use and maintenance of these ...
0
votes
2answers
286 views

RS Revelation '11 dual air fork leaks

I have a RS Revelation dual air fork. It's new, never used before. I installed it and after a few days I noticed, that it loses air. Maybe 20-30 psi over night. So at morning it's just too soft and ...
1
vote
2answers
408 views

Does “Carbon & Aluminium” really mean cheap plastic coated aluminium?

I'm looking to replace the suspension fork on my MTB (which has blown a seal) with a rigid fork now that I'm exclusively commuting in the city. During my research I came across the MOSSO 26" MTB ...
2
votes
4answers
978 views

How can I remove a fork if the bolt on the stem is rusted?

I got run over a car a few weeks ago and now i have to change the fork. It's an old racer, as you can see in the picture, with a 1 inch fork. I am trying to loosen it from the frame, but I can't ...
0
votes
1answer
337 views

Gap between fork and frame

I removed the fork from my old racer because I was hit by a car. When I'm trying to put the new fork on the frame, I get a gap where the top bearing is situated. What should I do? Could I just remove ...
0
votes
2answers
4k views

Where can I find a fork pressure guide?

I have a SR Suntour Rux S 130 mm fork and I don't know what pressure should I put into the left valve. For some reason I think this fork should have only 0 - 15 PSI pressure, but I don't know what ...
1
vote
2answers
2k views

100 mm front hub, 94 mm fork dropouts, options?

Simple as that. I thought I could He-Man the fork to fit the hub as it's only 3 mm on either side. Looks like it requires a bit of force and I'm concerned about breaking something in the long-run; ...
0
votes
2answers
2k views

Good resources to learn about forks

Quick question. I have a lower quality mountain bike with a bad suspension fork. Overall the bike isn't bad. It fits me well and I have a lot of fun on it. I would like splurge on a new mountain bike ...
1
vote
2answers
782 views

Why does a bike frame have to be above 56 cm usually to fit 700c tires?

I first came across this when I was looking at the Surly LHT, but I started to see it everywhere. It seems to me they can just put on a longer fork or something, or is it more for the back wheel?
3
votes
3answers
4k views

Are modern forks compatible with older style bikes?

I have an old 10-speed bike (likely 80's vintage) with a threaded fork. Can I replace it with a modern threadless fork with the style of stem that slides over the top of the fork and clamps on? I know ...
3
votes
3answers
1k views

Can I use normal grease for a car on the surface of carbon bike?

Helo Guys, I want to know your experience about carbon material and grease Can I use normal grease with carbon ? I want to put grease onto fork and stem.... Or WD-40 or silicone penetrant would be ...
7
votes
2answers
6k views

Is it possible/sensible to add a suspension fork to an old mountain bike?

I have a ~1993 Giant mountain bike. It's not great, but I am a very new and casual rider. The bike has a solid fork and it makes for the predictable rough trail ride. The trails are generally ...