Usually means the front fork, where the front wheel sits. Can also mean the rear fork, a part of the frame.

learn more… | top users | synonyms

-1
votes
1answer
68 views

I need help planning my bike renovation!

I'm planning on buying this bike online and making it, well y'know, mine. And to do this, I would like to make it look like an Aristotle bike. So I'm basically am going to need new rims to start and a ...
0
votes
3answers
83 views

Are front forks supposed to pull to centre?

So I took my bike in to the repair shop, to have the rear wheel replaced, but after the repair I noticed immediately the steering feeling a bit strange. I've since worked out why. The problem is that ...
0
votes
1answer
80 views

SR Suntour XCM v3 forks Headset

Currently building a new mountain bike and for the time being I'm using the old forks until I buy some new ones. My question is how do I find out what type of headset I need? Because from my ...
3
votes
2answers
58 views

torque specification on headset

I was wondering why there is a torque specification on the steer tube end of the stem for mountainbikes. The torque specification that goes to the handlebar is reasonable, after all handlebars are ...
17
votes
5answers
2k views

Is front-suspension a false-economy for cheaper bikes?

I'm a 30 year old male looking to purchase my first non-department store bike. I haven't biked in more than a couple years. My use-case is 90% asphalt (inner-city, occasional low-speed highway) and ...
1
vote
0answers
70 views

Lowrider style bent forks techniques

Would a 24 inch bent fork fit on a 20 inch frame? Is there even a 24 inch fork? Would a 26 inch fit? Also if it doesn't fit in could I just add to the 20 inch - would you be able to extend it making ...
0
votes
1answer
181 views

Replace 140mm fork with 160mm on Remedy 7 27.5 possible?

I'm Curious about whether it's possible or whether Remedy's frame is designed for such a replacement. Some bicycles makes it possible to upgrade to longer forks. I searched in Google, some people say ...
2
votes
2answers
111 views

I need to change my fork after having an accident with my bike

I need help as I need to change the fork for my bike (Ridgeback Speed 2013 Womens Hybrid Bike) I live in London and I went to few shops but in all of them they need to order the fork and it will cost ...
0
votes
1answer
79 views

Help with pairing the right headset to a new 3T fork

I recently purchased an Aventon Mataro (http://aventonbikes.com/track/) frame and a 3T Funda Pro with tapered fork (1 1/4' - 1 1/8' 1.25 ). I've been trying to figure out which headset I need to fit ...
0
votes
1answer
91 views

Dual air forks negative positive chamber pressure equality

Regarding solo air forks everything is clear. Once we bumped both chambers pressure is equal. But why for dual air forks air pressure doesn't try to get equal in both chambers? What's the point of ...
1
vote
1answer
69 views

What is the problem with my suspension fork?

I have a Manitou Skareb. I think it is a 2005. It was working fine the last time I rode it. I pulled the bike out after about 1 month of not riding and I could push the fork down about 1.5 inches with ...
2
votes
3answers
136 views

Bike type xc ht or cx? [closed]

I am a newbie on bikes and i want to buy one. I want to buy a bike that i can cover some small city road distances ~30km daily with comfort and to be able to go on some mountain trails when i got time ...
0
votes
1answer
624 views

Tapered fork into 44mm head tube?

I have a MTB Ghost SE 2000 frame which has a 1 1/8" head tube. I just measured it and it has a 44mm diameter top and bottom. I want to replace the stock fork. However it is hard to find non-tapered ...
0
votes
2answers
86 views

Carbon Fork Noise

I've got a 2 month old Cannondale Evo Supersix. When I take it over a rough patch of road (far too many of these in Wiltshire!) there is a loud noise coming from the forks - it's obviously caused by ...
2
votes
1answer
183 views

Road Bike Bending Rear Skewers

I'm pretty handy with bicycles, but I'm a little stumped on this one. Have a 90s Cannondale SR800 which is solid other than the back wheel was angled to the left side of the chainstays. Ridable, but ...
2
votes
1answer
1k views

Suspension fork swap for rigid: axle-to-crown confusion

I'm looking to replace the suspension fork on my bike with a rigid one. After much soul searching I've tentatively settled on the Surly 1x1. What's got me wrapped around the axle (pun intended!) is ...
2
votes
1answer
66 views

Are both sides of a Avid rotor the same?

i've got a Cotic Roadrat, and the disc mount on the fork is on the right hand side (as you're seated). However, the front rotor of the avid BB5s (road) i just bought can only be fit on the left fork ...
3
votes
2answers
309 views

Dual position air, solo air, coil, rebound: what do they mean about forks?

Lyric is available as Dual Position Air/ Solo Air / Coil. What do those terms mean generally? My speculations are leading me nowhere. If Dual Air means no hydraulic cylinder, how can the fork have ...
1
vote
2answers
228 views

Can a 120mm fork be mounted on Specialized Myka?

I have this fork available: RST Gila T8 (120mm travel option). The 80mm XCT fork on a 2-year old Specialized Myka is getting worn. I am considering installing the fork. Here it is explained that ...
0
votes
1answer
267 views

Upgrade suspension on hard tail MTB

I have a Suntours xcm (spring 80mm) on my hard tail. I drive more frequent and more pretentious. So I consider to upgrade my fork. How can I tell if I need a better one? What can a good air-suspension ...
0
votes
1answer
296 views

Trek 3700 XC Hardtail - looking to convert to temp road bike [duplicate]

Bike Description Front suspension, knobby tires Frame: Aluminum w/semi-integrated head tube, bi-oval down tube w/integrated gusset, rack & fender mounts, disc compatible dropouts, replaceable ...
1
vote
2answers
199 views

Screw cap stuck in adjustable stem connection, how to remove or reattach?

I was trying to detach my handlebar, because lowering was insufficient to make my bicycle fit in my box. I detached the long screw going connecting two lids thereby fastening the stem-handlebar ...
1
vote
4answers
241 views

Should cheap suspension forks be oiled often?

Should a cheap fork be oiled / lubricated from time to time? If yes, how?
2
votes
3answers
6k views

Thru Axle and Quick Release Fork/Frame Compatability?

Without using manufacturer specific parts: Can I use a wheel with a thru-axle hub on a standard quick release fork or frame dropouts (with an adapter)? Can I use a wheel with a quick release hub on ...
0
votes
2answers
190 views

Do quick release wheels require certain design in the fork?

Basically, can a older (early 90's) American/SAE measured non-suspension fork take a quick release wheel? I'm looking to rebuild/restore my old Huffy Fire Mountain MTB made around 1990*. It has a ...
1
vote
1answer
784 views

How can I fit a tapered fork to a 1 1/8 semi-integrated/zero stack head tube?

I have a 2004 Giant VT frame with a zero stack / semi-integrated headset. It currently takes a straight steerer threadless fork. Is there any type of headset I can put on so I can fit a tapered ...
0
votes
2answers
445 views

Differences between Izoard XP 2013 and Izoard XP 2014?

I wanted to buy a Wilier Triestina Izoard XP. The dealer told me that the Izoard XP 2013 with Shimano 105 cost 3021$ and I would have sold discounted to 2060$. The same price of the Izoard XP 2014 ...
0
votes
0answers
139 views

How much grease on a coil suspension fork?

When servicing my SunTour XCR suspension fork, I happen to put about a handful of grease. On a factory-lubed fork I found out that they pout less that 1/10th of that ammaunt. The grease goes tot the ...
4
votes
1answer
287 views

How often to sevice suspension forks

Consider a SunTour XCR coil fork or any similar. Service manuals suggest "full service" every 30 hours of riding time. I take that to mean removing the boots and re-lubing the stanchions. However, ...
1
vote
2answers
283 views

Building a 36er bike [closed]

I'm casually researching building a 36er bike, preferably mountainbike style. I'm looking for the experience of others on this. I would like to own it more for curiosity sake than any other, but would ...
3
votes
2answers
360 views

Gap between lower headset cup and fork. Is this likely to be a problem?

Yesterday I had a headset and fork fitted by my LBS. Lacking the specific tools or knowledge, I thought it better to leave this job to a professional; as a consequence of my inexperience, however, I ...
4
votes
2answers
256 views

How do I know if there is water in my fork

I have a SunTour XCR fork. Not wanting to ruin it I am worried that a significant amount of water has penetrated beyond the seals. I have recently ridden the bike in rain, snow, and washed it in a ...
1
vote
1answer
164 views

Not working fork

I have watched several video tutorials about how to service a fork and decided to try to open and clean my Suntour Nex 4610 fork . I didn't do anything besides cleaning and lubricating the tube. I ...
1
vote
2answers
469 views

Cantilever brakes for older narrow fork bosses (55mm)?

I have an 80s cyclocross frame I am restoring. The fork's cantilever bosses are spaced at 55mm - much narrower than the modern standard (around 70mm I believe). I tried to fit a pair of Tektro ...
0
votes
1answer
239 views

Maintenance of Fork springs on Marzocchi Bomber Dirt Jumper

I recently took my fork into my mechanic for service because it was making a rattling noise in one of the fork legs. Upon initial assessment he thought it was a broken return spring for the air ...
6
votes
3answers
430 views

Can I leave a suspension fork upside down?

I currently have my mountain bike disassembled, I broke a tire and needed some space in my room. The frame is resting upside down on the saddle and handlebar. The fork itself is a Rock Shox SID Dual ...
1
vote
1answer
130 views

Can a bent hub damage my fork?

I've recently noticed that my front hub is bent, or at least the parts that connect to the fork (any name for this?). It's not a huge bent, but it's clearly visible with your eyes. It fits the fork ...
1
vote
1answer
157 views

Will this fork crown race installation tool work?

I am looking to purchase a fork crown race installation tool, ant this one is the only one available online. The IceToolz thing is "to be delivered" someday. I am very skeptical of this tool, as it ...
2
votes
1answer
127 views

Spreading a steel front fork

Has anyone got tips on spreading an old steel front fork to fit a more modern hub? I've got minimal tools. I thought a car jack might be a good way to go..
2
votes
2answers
322 views

Fork replacement for SR Suntour 29er

I ride pretty aggressively cross country and trail in colorado, and occasionally will go to the bike park and do some jumps. I recently bought a specialized hardrock 29er for my wife, who's a novice ...
6
votes
1answer
227 views

Why would higher fork contribute significantly to breaking the frame?

When I recently cracked my frame near the headtube, every bike shop that I went to, asked me explicitly "Did you put a longer travel fork?". Putting aside that apparently fork travel and fork crown ...
1
vote
1answer
320 views

Fox Talas full travel not reachable

Last 20 mm of my new Fox 32 Talas 29" 130mm 2013 fork is not possible to reach. It gets quickly hard before the full travel. It is ridden for 150 km so far. Tested both on trail (hitting rocks on hard ...
6
votes
2answers
423 views

What is the purpose of this braze-on?

I'm wondering what the purpose of the braze-on pictured below is? It's on the non-drive side of my fork. I thought it could have something to do with racks, but then I figured they would put one on ...
1
vote
1answer
299 views

Pannier rack bag for a not suitable suspension fork (Btwin Rockrider 5.1)

I ride a Btwin Rockrider 5.1 with a baby seat, and want to attach one or two pannier rack bags. I guess I only can put it on the front wheel because of the baby seat which goes over the rear wheel, ...
0
votes
1answer
524 views

Fort bicycles company from Czech Republic: Where are the steel frames? Company renamed?

There is or was a company from Czech Republic that produced steel frames and forks. The name of this company is or was Fort. Why can’t I find anything about this company or their steel frames and ...
0
votes
2answers
209 views

Fork slider caps worn out. Replacements?

I have this fork and the plastic slider sleeves have worn out. Can I purchase replacements. The service manual says those are among the "wear-and-tear" parts.
1
vote
1answer
104 views

Difference between high and low pressure air springs?

I've just been adjusting the spring pressure on my Rock Shox SID XX fork and then adjusted my Manitou Minute Expert because I had the pump out. The SID has the solo air spring and needed 115psi and ...
4
votes
1answer
2k views

Upgrade/Replacement options for Cannondale Headshok DD50?

I have an older Cannondale that I love. It's an F600 comp (the special edition one in pumpkin orange), with a DD50 front shock. The problem is that the DD50 is WORN as all heck. Even when locked ...
5
votes
4answers
889 views

Disc brake rotor size and forks strength

I have been told that every fork has a maximum rotor size characteristic. For example, for my $75 Suntour this is listed as 185mm. The explaination that I have been given for this limitation is that ...
1
vote
1answer
66 views

Deepening the front fork dropout

I have an old 27" road bike in a long, lazy and cheapish process of restoration. I'd like to put 28" wheels on, which requires 4mm longer brake reach. The bicycle used to have fenders and the existing ...