The freewheel is a ratcheting mechanism, that coupled with a set of gears, is that threaded onto the rear hub of a bike. The freewheel allows the rear wheel to engage and move when the pedals are spun forward, but coast freely when the pedals are stationary or spun backwards.

learn more… | top users | synonyms

1
vote
1answer
46 views

7-speed cassette on an 11-speed freehub

Is it possible to use an SRAM cassette PG 730 7-speed cassette with a Mavic FTS-X freehub? According to the spec, no spacer is required for an 11-speed cassette and for 9/10 speed version a spacer is ...
3
votes
1answer
162 views

Is it a good idea to switch to hub gear?

I have a Firefox Roadrunner Pro. I wanted to know if it was a good idea to install an internal hub gear on it. I want to install it to reduce dust accumulation and oiling and to simplify the ...
2
votes
2answers
997 views

How should I lubricate my Shimano freewheel?

I have a Shimano freewheel (MX-30) that came with my bike from new. Unfortunately the internals got all gunked up and it stopped working (never engaged and became free both ways). I have bought and ...
1
vote
2answers
421 views

Why is my freewheel slipping?

My freewheel tarted slipping this week. It slips most from a stop with no pressure snapping to significant pressure on the pedals. Slipping may be the wrong term as it really isn't engaging. Once it ...
2
votes
0answers
41 views

Old road freewheels vs new mtn bike freewheels?

I heard an interesting opinion yesterday that said all freewheels made back in the day (we were discussing this over a wheel with a Maillard hub and a Maeda (?) freewheel). The shop mechanic said that ...
0
votes
1answer
62 views

Shimano rear hub body compatibility

My free hub body has cracked and im looking to replace it. I have discovered it uses a 14mm hex key to remove. I cannot find a freehub body for sale that matches m785. Will a "m760-m765" body fit my ...
1
vote
1answer
103 views

Removing Old Freehub Body

I saw this. However, looking at a old 7 speed freehub body, it looks like it takes a special spline wrench (TL-FH10). It looks very similar to the fixing bolt here. Or do I need some other wrench ...
0
votes
1answer
69 views

How to alter a sports cycle to avoid wheel bend

I have a Hero Hawk Nu-Age, which I bought it two years back. In India, this cycle was mostly used for sports. As this cycle has very thin wheels 27 * 1-1/4, I could not ride this on bumpy roads for ...
2
votes
2answers
169 views

Chain skipping on new freewheel and chain setup - What went wrong?

BACKGROUND NOTE: The bike is a 1992 Univega MTB that originally came with 6-speed SIS with a triple chainring. I removed the SIS shifter when it broke, and went with a friction shifter. The bike is ...
0
votes
2answers
155 views

What could be the reason for chain skipping

My chain is skipping only on the smallest sprocket, and it skips with every crank turn. The chain is not stretched. Also, chainrings are almost new. Could this freewheel be the reason, it doesn't seem ...
2
votes
2answers
103 views

How does this hub come apart?

Really, I have two questions. But first, I see no place to put a wrench on this hub. Well, there is one small notch on one side on the dust cap (on the other side). How do I get this hub apart? It's ...
4
votes
1answer
378 views

How many ball bearings inside shimano MF-HG20 freewheel top and bottom?

help me fix the bearings in my freewheel. I need to know the number of ball bearings top and bottom in my shimano mf-hg20 freewheel, and what size are they?
2
votes
1answer
225 views

Unknown freehub, trying to source

I have a neighbours daughters bike to fix at the moment. The freehub is totally seized. I've removed the freehub from the hub itself, but can't identify it nor have I see any like it. It doesn't have ...
1
vote
1answer
68 views

sun ez3 trike gearing

I have sun ez3 trike,it has rear freewheel with the largest being 28 teeth,can I put a mega range with 34 teeth on it,and do I have to change the deraileur.Objective to make hills easier.
2
votes
2answers
580 views

Planning on building a fixed-gear/single-speed from an old Schwinn World. What new parts will I need?

I think I want a flip flop hub, to keep my options open. If I get one off amazon, do I need to buy a freewheel and fixed-gear cog as well, or will those come with the hub? Also, does the hub have to ...
4
votes
1answer
150 views

Are all ready-made wheels sold “cassette compatible” only?

I will have to change my wheels on my old trusty late-80s Peugeot (PS28) soon. The rear wheel is mounted with a freewheel-type 6-speed hub (not cassette). I was wondering if all ready-made wheels ...
2
votes
1answer
66 views

Can you change a 7 speed freewheel to 6 speed

Can you change a 7 speed freewheel to a 6 speed
1
vote
1answer
204 views

What tool do I need to disassemble this 5 speed freewheel

I have a 5 speed freewheel that I need to take of from hub, but the standard freewheel tool that I do have does not fit. On the freewheel following text is engraved: UC SHIMANO SIS MF Z015 China It ...
8
votes
1answer
194 views

Why do deraillers require a freewheel?

I've seen fixies with internal hubs, but a non-freewheeling rear wheel with deraillers seems to be unrepresented: | Freewheel? | Derailler? | Yes | No | ...
3
votes
7answers
2k views

Is there such thing as a freewheel that doesn't click?

The clicking sound of the freewheel on my singlespeed when it's coasting is annoying for me, so I flipped over my back wheel and rode fixed for a few months in blissful silence. But having to pedal ...
9
votes
2answers
3k views

Why are higher-end freewheels so much louder when coasting?

I tend to ride relatively modest gear (Tiagra/Ultegra), but when I'm riding near higher-end bikes, I sometimes notice that the clicking sound that comes from their cassette/free-wheel while coasting ...
0
votes
2answers
12k views

how to reassemble mountain bike rear wheel hub and bearings

So I thought I would sort out my wheel bearings (after asking a few questions here first). Did the front without much of a problem, (reused the existing bearings at the moment, had not got round to ...
-1
votes
2answers
92 views

Freewheels frequency in 2012?

I would like to know for some future works on my bike whether I have a freewheel or a cassette? I will look at the bike in itself, but just for a little heads-up: my bike is a 2012 FX 7.2 (Trek). In ...
2
votes
1answer
507 views

How does one test the freewheel?

What are the failure modes (symptoms) of a failing or failed freewheel? My understanding of normal free wheeling means the rear tire should rotate when the bike is moving and the pedals are or are ...
5
votes
5answers
7k views

What should I use to lubricate a freehub?

I've noticed my freehub has gotten quite a bit louder over the last few months. Several people have recommended that I lubricate the freewheel by tipping the bike on its side and dripping lubricant ...
3
votes
3answers
1k views

Why is my chain riding up and skipping teeth on the freewheel?

Due to a number of reasons, I would like to keep my freewheel at all costs (It's a Sachs freewheel, the bike has all sorts of more 'vintage' components, and they're hard to come by). From reading all ...
2
votes
1answer
351 views

Do new wheels usually come with freehubs?

I was looking around for new wheels and thoroughly confused about the common approach to freehubs. Do they usually come with the freehub or do I have to actually put that on? If they do come with ...
3
votes
2answers
663 views

Mounting a 7-Speed Cassette on an 8/9 speed hub

I asked an earlier question regarding putting modern road wheels on my old steel frame. After clarifying a few things the main issue to me is the number of gears on the freehub. (The freehub I'm ...
4
votes
1answer
310 views

Should cassette “wiggle”

Recently My freehub broke and so I removed the cassette to replace the freehub and noticed, whilst off the bike, 4 of the remaining bolted together 8 sprockets wiggled (4 wiggled together but ...
4
votes
2answers
2k views

Advantages / disadvantages of freecoaster and cassette hubs

I've been reading a lot over the past few days about BMX, and last night I watched a few videos like this one. I have been seeing the words "freecoaster" and "cassette" around a lot, and I was curious ...
2
votes
3answers
1k views

Shimano MF Z012 replacement Freewheel?

I need to replace my Z012 freewheel due to wear on my 12 speed road bike. I can't seem to find a replacement that matches it. The large gear has 28 teeth and the small has 13. I bought a MF-TZ20 ...
2
votes
1answer
292 views

What hub to purchase for a GT aggressor?

I have a GT Aggressor 1.0 Specs here: http://www.gtbicycles.com/2013/bikes/mountain/trail/aggressor-1-0 Recently on a long ride, the crank started to roll freely after a long downhill. i.e. when ...
1
vote
1answer
1k views

How to determine size of freewheel?

My previous question was: How to take apart this rear BMX hub? How do I determine the size of my freewheel to replace it? I have seen on bicycle sites that a freewheel comes in sizes like 14t, 16t, ...
2
votes
2answers
1k views

What do I need to know when replacing my cassette?

I'm looking to replace the cassette on my bike with a smaller version, as I find I'm only ever using the top ring of my chainring (except once recently during rain-ageddon). What do I need to know ...
3
votes
2answers
2k views

How to take apart this rear BMX hub?

As shown in the photo, what tool do I need to take this rear hub apart? I assume I need a tool which will fit in the 4 notches. The problem I am trying to fix is that if you pedal, the rear cog spins ...
3
votes
2answers
4k views

How did my rear freewheel become incredibly tight overnight?

I got a flat yesterday morning after a normal ride, walked my bike inside the house and propped it upside-down (like this) overnight. This morning, I changed the flat and put on some brand new tires ...
3
votes
1answer
1k views

How do I clean the inside of a freehub?

I didn't know any better and I let degreaser drip into the freewheel body of my Shimano FH-RM65. Now it makes a terrible retching noise when it rotates. How do I clean the inside of this thing? ...
0
votes
2answers
2k views

Can I use an “8 speed compatible” crank such as Shimano FC-2303 with a 7 speed Shimano MF-HG37 freewheel?

I have a 2004 Giant Cypress I use for commuting, and the entire drivetrain is very worn out (shark teeth and chipped teeth, front and back). I need to replace the Shimano MF-TZ20 7-speed (14-34t) ...
2
votes
1answer
379 views

What crankset should I buy to suit an 8 Speed Campy freehub?

I've just bought a pair of campagnolo/mavic wheels without a freewheel. I'm finding it very hard to understand what will fit on the rear hub. It's English thread, does this mean that any 8 speed ...
3
votes
3answers
6k views

What tool is needed to remove a Shimano HG-50 freewheel?

What tool is needed to remove a Shimano HG-50 freewheel from the wheel hub? It looks like a 12mm or 13mm Allen key. Will this do it or is there some detail I have missed?
6
votes
4answers
2k views

Do silent freewheels exist?

I have only just noticed that my bike dosen't seem to make a lot of noise when free wheeling, in fact it's pretty much silent. Is this down to the fact that I have been putting off a major clean?, is ...
1
vote
2answers
848 views

Chain “vibrates” on higher gears

My freewheel that I have installed myself only 1.5 years ago has totally worn out by the moment and so I just had it replaced along with a chain at the workshop. I'm still concerned though about the ...
3
votes
2answers
4k views

Options for replacing a 7 speed Shimano cassette / chain

I would like to replace my 7 speed HG70 cassette and chain. My problem is that it is increasingly difficult to find quality parts for 7 speed system. My bike is a Trek 970 from 1993, originally with ...
1
vote
2answers
447 views

Will an ACS 13T X 3/32 Crossfire freewheel fit an All-City Standard 130mm Hub?

Will an ACS 13T X 3/32 Crossfire freewheel fit an All-City Standard 130mm fixed/free Hub? I am attempting to setup a goldsprints setup using a very large front ring and a small rear freewheel. I'm ...
2
votes
2answers
8k views

When I pedal the rear wheel is not turning

I have a very old bike. It used to work perfectly, but just recently it happened that when I pedal the rear wheel is not turning. Just for notice I pedal in the correct direction, brakes are not ...
2
votes
5answers
849 views

Home-made sealed freewheel?

Is there any way to do a home-made sealing on my freewheel? Is there any material recommended to do it? Anyone can find some previous try documented? Will I fail miserably if I try to source a ...
4
votes
2answers
981 views

Tightening rear quick release stops rear wheel

I have a medium sized Trek Mountain Track/Antelope with a seven speed freewheel. When I tighten the rear quick release, I have to carefully back off on the tightness so that the wheel will actually ...
5
votes
3answers
344 views

Shaky Freewheel

I posted a question some time ago about vibrations in the frame of my road bike (a 1973 Sekine). Recently, I determined that the rear wheel is sliding back and forth across the axle, with about 0.5cm ...
22
votes
2answers
3k views

What's stopping you from pedalling backwards?

On the BMX bike I have, pedalling backwards moves the chain but doesn't drive the wheels of the bike backwards like you would expect it to. Why is this?
1
vote
3answers
5k views

removing freewheel MF-Z012 without tools

I'm trying to just add some grease to an old MF-Z012. some pages online says i can remove it just by spining the first gear agains the last one.(e.g. ...