The freewheel is a ratcheting mechanism, that coupled with a set of gears, is that threaded onto the rear hub of a bike. The freewheel allows the rear wheel to engage and move when the pedals are spun forward, but coast freely when the pedals are stationary or spun backwards.

learn more… | top users | synonyms

-1
votes
2answers
102 views

Freewheels frequency in 2012?

I would like to know for some future works on my bike whether I have a freewheel or a cassette? I will look at the bike in itself, but just for a little heads-up: my bike is a 2012 FX 7.2 (Trek). In ...
2
votes
1answer
1k views

How does one test the freewheel?

What are the failure modes (symptoms) of a failing or failed freewheel? My understanding of normal free wheeling means the rear tire should rotate when the bike is moving and the pedals are or are ...
2
votes
1answer
836 views

Do new wheels usually come with freehubs?

I was looking around for new wheels and thoroughly confused about the common approach to freehubs. Do they usually come with the freehub or do I have to actually put that on? If they do come with ...
4
votes
9answers
5k views

Is there such thing as a freewheel that doesn't click?

The clicking sound of the freewheel on my singlespeed when it's coasting is annoying for me, so I flipped over my back wheel and rode fixed for a few months in blissful silence. But having to pedal ...
3
votes
2answers
1k views

Mounting a 7-Speed Cassette on an 8/9 speed hub

I asked an earlier question regarding putting modern road wheels on my old steel frame. After clarifying a few things the main issue to me is the number of gears on the freehub. (The freehub I'm ...
4
votes
1answer
530 views

Should cassette “wiggle”

Recently My freehub broke and so I removed the cassette to replace the freehub and noticed, whilst off the bike, 4 of the remaining bolted together 8 sprockets wiggled (4 wiggled together but ...
2
votes
2answers
3k views

How should I lubricate my Shimano freewheel?

I have a Shimano freewheel (MX-30) that came with my bike from new. Unfortunately the internals got all gunked up and it stopped working (never engaged and became free both ways). I have bought and ...
4
votes
2answers
8k views

Advantages / disadvantages of freecoaster and cassette hubs

I've been reading a lot over the past few days about BMX, and last night I watched a few videos like this one. I have been seeing the words "freecoaster" and "cassette" around a lot, and I was curious ...
2
votes
3answers
3k views

Shimano MF Z012 replacement Freewheel?

I need to replace my Z012 freewheel due to wear on my 12 speed road bike. I can't seem to find a replacement that matches it. The large gear has 28 teeth and the small has 13. I bought a MF-TZ20 ...
2
votes
1answer
485 views

What hub to purchase for a GT aggressor?

I have a GT Aggressor 1.0 Specs here: http://www.gtbicycles.com/2013/bikes/mountain/trail/aggressor-1-0 Recently on a long ride, the crank started to roll freely after a long downhill. i.e. when ...
2
votes
2answers
3k views

What do I need to know when replacing my cassette?

I'm looking to replace the cassette on my bike with a smaller version, as I find I'm only ever using the top ring of my chainring (except once recently during rain-ageddon). What do I need to know ...
1
vote
1answer
2k views

How to determine size of freewheel?

My previous question was: How to take apart this rear BMX hub? How do I determine the size of my freewheel to replace it? I have seen on bicycle sites that a freewheel comes in sizes like 14t, 16t, ...
3
votes
2answers
4k views

How to take apart this rear BMX hub?

As shown in the photo, what tool do I need to take this rear hub apart? I assume I need a tool which will fit in the 4 notches. The problem I am trying to fix is that if you pedal, the rear cog spins ...
3
votes
2answers
9k views

How did my rear freewheel become incredibly tight overnight?

I got a flat yesterday morning after a normal ride, walked my bike inside the house and propped it upside-down (like this) overnight. This morning, I changed the flat and put on some brand new tires ...
3
votes
3answers
2k views

Why is my chain riding up and skipping teeth on the freewheel?

Due to a number of reasons, I would like to keep my freewheel at all costs (It's a Sachs freewheel, the bike has all sorts of more 'vintage' components, and they're hard to come by). From reading all ...
3
votes
1answer
2k views

How do I clean the inside of a freehub?

I didn't know any better and I let degreaser drip into the freewheel body of my Shimano FH-RM65. Now it makes a terrible retching noise when it rotates. How do I clean the inside of this thing? ...
0
votes
2answers
3k views

Can I use an “8 speed compatible” crank such as Shimano FC-2303 with a 7 speed Shimano MF-HG37 freewheel?

I have a 2004 Giant Cypress I use for commuting, and the entire drivetrain is very worn out (shark teeth and chipped teeth, front and back). I need to replace the Shimano MF-TZ20 7-speed (14-34t) ...
2
votes
1answer
465 views

What crankset should I buy to suit an 8 Speed Campy freehub?

I've just bought a pair of campagnolo/mavic wheels without a freewheel. I'm finding it very hard to understand what will fit on the rear hub. It's English thread, does this mean that any 8 speed ...
3
votes
3answers
10k views

What tool is needed to remove a Shimano HG-50 freewheel?

What tool is needed to remove a Shimano HG-50 freewheel from the wheel hub? It looks like a 12mm or 13mm Allen key. Will this do it or is there some detail I have missed?
7
votes
4answers
4k views

Do silent freewheels exist?

I have only just noticed that my bike dosen't seem to make a lot of noise when free wheeling, in fact it's pretty much silent. Is this down to the fact that I have been putting off a major clean?, is ...
1
vote
2answers
2k views

Chain “vibrates” on higher gears

My freewheel that I have installed myself only 1.5 years ago has totally worn out by the moment and so I just had it replaced along with a chain at the workshop. I'm still concerned though about the ...
1
vote
2answers
630 views

Will an ACS 13T X 3/32 Crossfire freewheel fit an All-City Standard 130mm Hub?

Will an ACS 13T X 3/32 Crossfire freewheel fit an All-City Standard 130mm fixed/free Hub? I am attempting to setup a goldsprints setup using a very large front ring and a small rear freewheel. I'm ...
3
votes
2answers
6k views

Options for replacing a 7 speed Shimano cassette / chain

I would like to replace my 7 speed HG70 cassette and chain. My problem is that it is increasingly difficult to find quality parts for 7 speed system. My bike is a Trek 970 from 1993, originally with ...
2
votes
2answers
22k views

When I pedal the rear wheel is not turning

I have a very old bike. It used to work perfectly, but just recently it happened that when I pedal the rear wheel is not turning. Just for notice I pedal in the correct direction, brakes are not ...
4
votes
2answers
2k views

Tightening rear quick release stops rear wheel

I have a medium sized Trek Mountain Track/Antelope with a seven speed freewheel. When I tighten the rear quick release, I have to carefully back off on the tightness so that the wheel will actually ...
5
votes
3answers
403 views

Shaky Freewheel

I posted a question some time ago about vibrations in the frame of my road bike (a 1973 Sekine). Recently, I determined that the rear wheel is sliding back and forth across the axle, with about 0.5cm ...
5
votes
5answers
12k views

What should I use to lubricate a freehub?

I've noticed my freehub has gotten quite a bit louder over the last few months. Several people have recommended that I lubricate the freewheel by tipping the bike on its side and dripping lubricant ...
2
votes
5answers
1k views

Home-made sealed freewheel?

Is there any way to do a home-made sealing on my freewheel? Is there any material recommended to do it? Anyone can find some previous try documented? Will I fail miserably if I try to source a ...
2
votes
4answers
822 views

Disk brakes severely reduced in power after replacing bearings

so I am creating a few posts about bearings and wheels, (story so far): how to reassemble mountain bike rear wheel hub and bearings mountain bike freewheel hub stopped rotating I have now got the ...
2
votes
2answers
2k views

mountain bike freewheel hub stopped rotating

So I was trying to replace my rear bearings and got stuck, (see question below): how to reassemble mountain bike rear wheel hub and bearings After this I felt confident to go ahead. Was putting it ...
0
votes
2answers
21k views

how to reassemble mountain bike rear wheel hub and bearings

So I thought I would sort out my wheel bearings (after asking a few questions here first). Did the front without much of a problem, (reused the existing bearings at the moment, had not got round to ...
1
vote
3answers
7k views

removing freewheel MF-Z012 without tools

I'm trying to just add some grease to an old MF-Z012. some pages online says i can remove it just by spining the first gear agains the last one.(e.g. ...
24
votes
2answers
5k views

Why does pedalling backwards not move my bike backwards?

On the BMX bike I have, pedaling backwards moves the chain but doesn't drive the wheels of the bike backwards like you would expect it to. Why is this?
7
votes
1answer
974 views

When to replace wheel bearings

I just ripped apart my mom's mountain bike's rear hub. One of the bearings was incredibly rough, so I replaced it, and the other one was smooth, but didn't turn very easily. Since I didn't have a ...
8
votes
4answers
551 views

What can I do to keep my rear derailler in good condition when commuting in the snow?

In the winter, it seems that whatever I do, my rear derailleur stops functioning after few weeks of commuting in light snow. Ice always gets in there somehow, and the chain refuses to move the wheel, ...