Tagged Questions
1
vote
0answers
32 views
Direct Mount with top and bottom swing?
I want to buy a new frame that supports Direct Mount. Now I read that Bottom Swing is preferable for hardtails. At the same time, it was also mentioned that Bottom Swing is mounted higher onto the ...
5
votes
3answers
141 views
How can I increase the highest gear ratio?
I am looking for some higher cog front gears for an old bike I am considering. I've been away from it for some time and don't know the current number of cogs on the front ring, but I am looking to ...
1
vote
3answers
159 views
Gear up-shift not smooth
When I am pedaling hard and shift to a larger sprocket, the shift is not smooth or sometimes doesn't happen at all. Sometimes even double up-shifts don't work. There is no problem shifting when I test ...
4
votes
2answers
204 views
Different Gear Type when there's no Front Derailleur?
I have a 7 speed Jamis Boss Cruiser, 7 gears in back and one up front. I've been using it fine for several months now. Lately, the chain is coming off of the single front gear, usually after stopping ...
1
vote
3answers
111 views
Refitting Cable to Rear Derailleur
Whilst riding recently the cable slipped from the clamp on the rear derailleur.
I'm attempting to affect repairs by re-clamping the cable. However by pulling the cable tight I have lost the bottom 2 ...
5
votes
2answers
549 views
Upgrade Shimano from 9- to 10- speed
I'm thinking of upgrading the 9-speed Tiagra rear mech on one of my (road) bikes to something, still Shimano, but 10-speed.
The obvious replacements I'll need are cassette, right-shifter and chain. ...
6
votes
4answers
292 views
Comparing gear ratios on different bike types
How can I compare gear ratios on different wheel sizes? How can I compare gear ratios on MTB with tracking bikes with bigger wheels? How can I compare gear ratios with gear hubs?
0
votes
2answers
197 views
Unable to change from 14th to 7th
I've got a bike that I have had for about 8 weeks and it has already been back to be serviced twice. It's just returned from the second service and I've noticed that it is not shifting from 14th to ...
4
votes
3answers
4k views
Can I fit a cassette with a larger range with my Shimano Tiagra 10-speed ( GS-4600) derailleur?
I'm currently running a 2x10 shimano tiagra 10-speed drivetrain with a 50/34 compact crankset, a 12-30 rear cassette, and a Shimano Tiagra GS-4600 derailleur (that's medium cage aka road long cage) on ...
5
votes
3answers
793 views
Why does my bike stick in low gears?
When I change into a low gear (i.e. onto a bigger cog) on my back cog all is fine. However, when I later change up again the chain sticks on the larger cog. I commute about 10 miles a day and this has ...
3
votes
1answer
693 views
Is it practical to replace two sprockets on a cassette?
My bike has 53/39T chainrings and a cassette with 12,13,14,15,17,19,21,23,25 sprockets, but I like to ride up steep mountain roads. Is it possible (without great expense) to replace two sprockets to ...
3
votes
1answer
314 views
Is my front derailleur angled straight?
I am attempting to adjust my front gears and have also been following a video to adjust the high/low position of my front derailleur.
The issue I am having is that the low adjustment is no where near ...
2
votes
2answers
263 views
Has bicycle gearing become 'easier' over the last few decades?
If you look at a 10-12 speed bicycle from the days before indexed gears you have a 27"/700c wheel with a 42/52 chainset and a 14-28 freewheel. At the time such a setup was standard for High Street ...
14
votes
4answers
12k views
What are the pros and cons of internal gears?
I've had my hybrid 24-speed for a bit over 3 years now, and just last weekend, when looking for a bike for my wife, discovered internal gears. Suffice to say it blew my mind when I saw 7-speed ...
22
votes
6answers
3k views
What's the efficiency of hub gears compared to derailleurs?
What's the efficiency of hub gears compared to derailleurs. I know that hub gears are not as efficient, a part from being heavier, how much will I loose in performance if I use hub gear?
24
votes
5answers
2k views
Perfectly setting up gears - how?
Every time I have my bike serviced, the bike shop sets up the gears on a stand in their workshop. The gears change perfectly on the stand, but when the bike is on the road, the rear derailleur doesn't ...
