Gears in the drivetrain of a bike.

learn more… | top users | synonyms

0
votes
0answers
22 views

My cycle's gears don't change properly

At the rear wheel gear, the gear does not change from the 7th gear to the 6th gear when i change the gear in the handlebar once. But the next time i do it it changes. So, if the manual in the ...
8
votes
2answers
202 views

How to check the gear before renting a bike?

I don't own a bicycle. Whenever I go cycling, I would need to rent one. The first thing that I always check is to see if the brakes are working properly. Sometimes, I have no idea that the gear is ...
-1
votes
1answer
29 views

Can i set up a 7speed gear and disc brake on hercules rocky mtb 2.0 cycle

My cycle is a non gear cycle .Can i set up disc brake and 7speed gear.
3
votes
1answer
171 views

Sachs- Huret derailleur (re)installation

Sachs - Huret derailleur installation So the learning curve continues on the '85 Peugeot P-16. The main lessons are to take pictures and time getting each thing done. I have the rear derailleur ...
5
votes
2answers
4k views

Is it practical to replace two sprockets on a cassette?

My bike has 53/39T chainrings and a cassette with 12,13,14,15,17,19,21,23,25 sprockets, but I like to ride up steep mountain roads. Is it possible (without great expense) to replace two sprockets to ...
-2
votes
4answers
114 views

Constant / maximum set load bike? Does it exist?

Does a bike exist such that you can program it with what load you desire and it will shift gears for you based on that load or maybe never exceed that load? For example, suppose an older person has ...
0
votes
1answer
47 views

Shimano 105 5800 front derailleur installation

I am currently installing a front derailleur as part of a new bike build. It attaches to the frame via a braze on mount. I can't get it to shift onto the big ring. It shifts onto the big ring only ...
1
vote
1answer
42 views

MTB gear xx1 repairable?

I have an XX1 cassette, and broke the cog with 24 teeth, is this replaceable or repairable?
3
votes
1answer
78 views

Indexing issues on new build, shimano 105 5800

I am in the process of building a road bike. I currently setting up my rear derailleur. I can't seem to index the gears. I have set the high and low limit screws. I can shift up the cassette (small ...
3
votes
2answers
74 views

cable tension for Shimano 105 Front derailleur is very tight

I just got a merida scultura 400 and on the biggest chainring there's rubbing on the outside of the front derailleur cage. the only way that I can lower this is by tightening the cable by ALOT. is ...
0
votes
0answers
37 views

Connect Trekking Bike Brakes to Road Bike Lever

A family member will give me his old (high class) trekking bike. I like the bike a lot but would like to swap the steering bar for a road bike one, which I am used to and like a lot. Is it possible ...
1
vote
0answers
61 views

Campagnolo Cambio Corsa

Does anyone make this sort of system and sell it today, or is my only option looking for someone selling theirs? I've googled whether similar systems are being made today but found nothing to my ...
1
vote
1answer
61 views

When I shift to the smallest cog, it's suddenly too loose

The other day I was riding with the chain on the smallest cog in the back (and the middle chainring in the front) and suddenly something felt like it slipped and the chain was suddenly way too loose. ...
2
votes
2answers
1k views

Convert 9 speeed Campagnolo Ergo Levers to 10 Speed

A friend gave me a carbon set of campag record 9 speed ergos. I would love to convert the 9 to 10 Speed and I understand it is possible. I have read that some dealers will do it but the cost is ...
1
vote
3answers
168 views

SRAM compatible 11 speed 12-25 cassette?

I'm looking for an 11 speed 12-25 cassette compatible with a SRAM drivetrain, however I don't think SRAM makes one. They list specs for their 11 speed cassettes as follows: 11-25: ...
6
votes
4answers
4k views

Can I increase my highest gear ratio?

I have a modern bike (ridgeback meteor '13) and It currently has a 21 speed shimano chainset. I find that going down hills (which I do a lot) and on flats I need a higher gear. Can I do anything to ...
1
vote
1answer
41 views

Front derailleur takes 6 clicks to shift gears, instead of 3 [duplicate]

I've just stripped all cables and chain from a badly kept bicycle and replaced them. I've correctly adjusted the rear derailleur and it works great. However, front derailleur which only has 3 gears ...
5
votes
2answers
1k views

(Automatic Bike Project) amount of torque required to change gears?

I am planning to build an electronically controlled automatic bike transmission for my senior design project. I'm personally more of an electrical guy, so dealing with the mechanics is somewhat new to ...
1
vote
1answer
97 views

Upgrading parts on Fuji Panic 3.0 [closed]

I want to upgrade some gear parts on my current bike, which is a Fuji Panic 3.0 I don't really know if it will be compatible though. The bike: ...
3
votes
3answers
217 views

Questions about shifting from a new road cyclist

I recently purchased a used bike from my local co-op. I've ridden previously on fixed bikes with straight bars, but this bike is the first one I've owned where I have to shift and use drop handlebars. ...
0
votes
1answer
122 views

Opposed cone chainless progressive 24 speed gearing system using belts, has it been tried? [closed]

I am wondering why on bikes I don't see them using a pair of opposed ice cream cone shaped gears such that a fixed length belt can be moved on them to change the gear ratio. It would be cool if ...
3
votes
1answer
52 views

can down tube shifters be used with a gear set of 21 gears? (3x7)

I have two bikes - one a vintage 12 speed with down tube shifters - the other a twist shift gear conversion with 21 set shimano gears. I want to put the 21 gear set on the intage road bike - can I ...
6
votes
2answers
101 views

Which cables and housing do I need?

I am going to build my own bike. I purchased the 105 5800 groupset the other day and was examining the different components. The shifters came with some cables and cable housing. I have attached a ...
3
votes
1answer
77 views

Is it possible to fit twist grip gears on vintage drop down handlebars?

I have a bit of a Frankenstein bike made from odd parts and it has straight handlebars with twist grip gears fitted to an old road bike style frame. I hate the straight bars but love the twist grip - ...
5
votes
1answer
2k views

Can I add gears on a bmx?

Just asking if it is possible. My friend added gears, but won't it damage the look or my cycle?
6
votes
2answers
15k views

Special hub requirements for an 11-speed group

In a question earlier today (Changing cassette from 8 to 10 or 11 to meet the Shimano 105 5800 groupset) the Op asserts that they would need to change their hub, if they wanted to go from a 10- to 11- ...
6
votes
1answer
94 views

Can I mix and match cogs from 2 different SRAM cassettes and still expect it to work?

My road bike currently has a 12-25 cassette on it. I really want the cog with 11 teeth instead of the cog with 12 teeth, but I don't want to upgrade to a full 11-32. If I were to install a new 12-25 ...
2
votes
2answers
119 views

Half speed internal hub gear?

Rather than resort to radical gears such as a very small granny chainring (such as 20T) and a very large rear cog (40T), both of which can cause some problems for derailleurs as well as other problems ...
2
votes
1answer
29 views

Internal hub gear suddenly stopped shifting

I have never had an internal hub gear bike before, so I don't know much about them. My issue is that all of the gears stopped working suddenly when I was just riding the bike. The bike has 5 gears, ...
0
votes
2answers
369 views

Shimano Gears won't shift

Basically when pushing the button to shift gear I can only get one speed up and one speed down. I tried adjusting derailer and the tightness on cables but it makes no difference. Figured I'd make a ...
16
votes
4answers
36k views

Help Me Understand My Bicycle's Gears

I've recently started commuting with a bicycle (Giant hybrid bicycle). I've been trying to learn a little about bicycling to make my commute easier and my time on the bicycle more enjoyable. Please ...
0
votes
1answer
39 views

Upgrade gear ratio

I have a triple chainset 50*39*30*,and 9speed cassette.Could I upgrade these to a 52*chainset and a 10speed cassette,without changing the chain or derailleur.TIA
-4
votes
2answers
63 views

How does a RD (rear derailleur) handle variable tooth gaps?

I am trying to better understand how a rear derailleur (RD) works. I can understand how the RD moves inward and outward but suppose someone changes several of their cogs on the cassette. Let's just ...
-4
votes
1answer
117 views

Closely spaced nonoverlapping 36 (2x12x2) gears borrowing from music theory. Good idea?

I had an idea. Why not space gears on a bike the same as musical notes? For example, in music, if you start on a certain note (let's say C3), you need to go up 12 more half steps (notes) to get to ...
-2
votes
1answer
110 views

Left side isolated granny gear, right side all other gears? Possible and practical? [closed]

To me, the left side on a bike that doesn't have a rear disc brake is being somewhat wasted. So how about this idea... on the right side have the normal gears but on the left side, have a ...
0
votes
2answers
144 views

Hypothetical 1x10 simplification to 1x3 or 1x5

This is a hypothetical question that will help viewers (including myself) better understand gears and their limitations. Suppose someone sees a bike they like at a local bikeshop and it just happens ...
1
vote
3answers
65 views

Troubleshooting a bent mech hanger [duplicate]

I think I bent the mech hanger (right term?) on my Schwinn MTB. Now changing gears is hard. I'm trying to better understand my options. What I understand so far as to what I can do: Look for a new ...
5
votes
1answer
67 views

Can you have too many in line barrel adjusters?

Just replacing the shifters on my bike. It had STI shifters and I'm putting thumb shifters on, the shifters have built in barrel adjusters. The bike also came with barrel adjusters on the down tube, ...
1
vote
1answer
61 views

24 gear SRAM shifters- PROBLEM

So recently i bought a carrera vengeance for £45 which is a bargain and the only problem was the gears(24 gear SRAM shifters) for the left side. When i got it i tried to shift but it just clicks and ...
-6
votes
2answers
88 views

2 speed quad sprocket bike… do these exist? If not, why not? [closed]

I was wondering if they make a 2 speed bike with a design having 2 front sprockets (one on each side of the bottom bracket) and 2 rear sprockets such that there is some mechanism that can switch ...
-2
votes
2answers
100 views

Using only 7 speeds of an 8 speed freewheel is ok?

I currently have a 7 speed Shimano RD (rear derailleur) that is working perfectly with the stock 7 speed freewheel which is 14-28. Shimano has a MegaRange 7 speed freewheel that is 14-34 but the ...
-5
votes
1answer
81 views

Why don't we see this special progressive 3x5 gear setup being offered? [duplicate]

This question is not the same as the 36 gear post which used a combination of internal hub gears, cogs, and chainrings. This one is much simpler and much lower cost. Part of the problem of something ...
5
votes
4answers
24k views

Heavier Thicker Chains and Gears for Winter due to Salt?

I have two bikes: one having gear-things outside and one with inner-hub. The gear-outside-bike has suffered a lot due to the salt during this winter, the other hilariously looks like a new one. I ...
5
votes
4answers
179 views

The shifter for the front derailleur is “soft” in my vintage bike

So I bought a used vintage bike. I just love the bike and it's awesome. However it came with one problem: gears problems. First of all I have very little experience with bike, especially gears ...
4
votes
1answer
78 views

Gear cables replacement - inline barrel adjusters

I'm in the process of ordering replacement gear cables for my road bike which has 105-5800 groupset. My existing cables have inline barrel adjusters and I was wondering: Are the inline barrel ...
-2
votes
3answers
105 views

Sensible shifting on a triple chainring?

I have found from experience on my 3x7 MTB that shifting a triple front chainring is useful if you do the following: I tend to use only the first 3 cogs in the smallest chainring so that is 3 very ...
1
vote
1answer
78 views

Ideal % jump between gears?

I am wondering if people prefer equally spaced gears (such as 20% per gear change) or if (like on motorcycles), the lower gears are spread out more and the upper gears are "tighter" (more closely ...
13
votes
5answers
3k views

Worries about a gear ratio of 1:1?

I'm planning a randonneur-like bike with drop bars, STI shifters, and nevertheless some low gears. The crankset could be a "compact plus" (I guess from Sugino), 44 and 28 teeths, and the cassette a ...
5
votes
2answers
198 views

How do I change the granny gear on a cheap Walmart mountain bike?

I have a cheap ($100) 26" Walmart mountain bike (Hyper Summit) that has a triple chainring (24,34,42). It appears there is no easy way to remove the granny gear since it has what looks like some type ...
2
votes
2answers
184 views

Triple chainring + nonstandard sloped cogset. Can this work?

It seems that on my mountain bike and all other multispeed bikes I have seen having a rear cassette or freewheel all have sloped cogs, meaning they go from largest to smallest in order of decreasing ...