Gears in the drivetrain of a bike.

learn more… | top users | synonyms

2
votes
1answer
115 views

how to fix gear ring that over-jumps

I am pretty new here, and I am not acknowledged with the bicycle terminology in English, so this topic might be a duplicate. Sorry in advance. So, when I put more pressure while pedaling, the chain ...
0
votes
1answer
218 views

Do faired recumbents need more gear range?

I am researching into faired recumbents, bicycles or trikes, such as the Velomobile Quest or the Sunrider. I'm interested in cycling long distances as a daily commute and for touring, but have no ...
2
votes
2answers
1k views

Beside drive train, what is the difference between group components (e.g. 105 vs. Ultegra)?

In his previous post, jmusits asked the difference between the Shimano 105 and Ultegra drive train. Obviously, the derailleur is certainly one of the major components of a group. However levers, ...
0
votes
2answers
219 views

I need to change my bike from UK to US Spec

I bought a bike from the UK. The brakes and shifters are on the opposite sides. I want to change it so the front brake is on the left and the rear is on the right, Same thing for the shifters. I ...
4
votes
1answer
135 views

How to check the gear before renting a bike?

I don't own a bicycle. Whenever I go cycling, I would need to rent one. The first thing that I always check is to see if the brakes are working properly. Sometimes, I have no idea that the gear is ...
2
votes
1answer
162 views

Raleigh AT20 series bottom bracket affects derailleur

I took out the bottom bracket to clean it etc taking off the pedal shafts etc - and when it came to putting it back - the front derailleur was well out of adjustment - Have I done something wrong>- ...
3
votes
4answers
398 views

Does never using the easy front gear give a better workout?

I have a road bike with a 52/36 crankset. I make it a point to never use the easy gear because I think that it gives me a better workout when climbing hills. Another reason I don't use it is because ...
5
votes
1answer
348 views

Number of gears for a racer

I am looking to upgrade my racer, I currently have a Bottecchia racer from the mid-80s and it has 14 gears. While looking around for newer racers I noticed that a number of them had 20 gears while ...
3
votes
1answer
406 views

Direct Mount with top and bottom swing?

I want to buy a new frame that supports Direct Mount. Now I read that Bottom Swing is preferable for hardtails. At the same time, it was also mentioned that Bottom Swing is mounted higher onto the ...
3
votes
5answers
1k views

Are single-speed bikes better equipped to handle cog/chain wear?

I need to decide between a single-speed and multiple-speed bike. I usually ride multiple-speed mountain/city bikes in the highest gear anyway (around town). They're not intended for that, and doing ...
5
votes
3answers
1k views

How can I increase the highest gear ratio?

I am looking for some higher cog front gears for an old bike I am considering. I've been away from it for some time and don't know the current number of cogs on the front ring, but I am looking to ...
1
vote
2answers
310 views

Does new chainring require change of other parts?

I'm thinking about changing my 2nd chanring to a smaller one (2 chanring setup). I hear most people recommend to change the chain when changing the cassette. Hence my question: should I expect to ...
3
votes
2answers
2k views

What is a better gearing combination for downhill?

One of the tracks I've been riding recently is testing both my skill level and my bike. The track is a combination steepness and roughness that makes it significantly different to what I've previously ...
1
vote
3answers
2k views

Gear up-shift not smooth

When I am pedaling hard and shift to a larger sprocket, the shift is not smooth or sometimes doesn't happen at all. Sometimes even double up-shifts don't work. There is no problem shifting when I test ...
4
votes
2answers
626 views

Different Gear Type when there's no Front Derailleur?

I have a 7 speed Jamis Boss Cruiser, 7 gears in back and one up front. I've been using it fine for several months now. Lately, the chain is coming off of the single front gear, usually after stopping ...
1
vote
2answers
10k views

How do I adjust my 7-speed Shimano SIS indexed shifter not to miss out one of the cogs?

I have a 7-speed indexed twist-grip gear-shifter, but it was set up incorrectly: it has eight positions, the fourth is where the numbers start showing, and while it hits the top and bottom gears, it ...
1
vote
3answers
251 views

Refitting Cable to Rear Derailleur

Whilst riding recently the cable slipped from the clamp on the rear derailleur. I'm attempting to affect repairs by re-clamping the cable. However by pulling the cable tight I have lost the bottom 2 ...
2
votes
1answer
779 views

Can I add gears on a bmx?

Just asking if it is possible. My friend added gears, but won't it damage the look or my cycle?
3
votes
2answers
1k views

Mounting a 7-Speed Cassette on an 8/9 speed hub

I asked an earlier question regarding putting modern road wheels on my old steel frame. After clarifying a few things the main issue to me is the number of gears on the freehub. (The freehub I'm ...
3
votes
3answers
3k views

How much faster can i go after moving from 2x10 to a 3x10 gear setup?

My 26" mountain bike currently has a 2x10 gear setup with SRAM components: a SRAM S-1250 crank with 38/24 chainrings, and a SRAM PG-1030, 10-speed, 11-36t cassette. I feel that when riding on ...
5
votes
2answers
6k views

Upgrade Shimano from 9- to 10- speed

I'm thinking of upgrading the 9-speed Tiagra rear mech on one of my (road) bikes to something, still Shimano, but 10-speed. The obvious replacements I'll need are cassette, right-shifter and chain. ...
6
votes
4answers
698 views

Comparing gear ratios on different bike types

How can I compare gear ratios on different wheel sizes? How can I compare gear ratios on MTB with tracking bikes with bigger wheels? How can I compare gear ratios with gear hubs?
4
votes
4answers
2k views

Chain skipping on some gears

I have an old cruising bike with 21 gears. A few months ago I was pedalling back home when my chain broke, and I was only able to get the chain replaced this week. After having it replaced I noticed ...
1
vote
1answer
1k views

Mixing 9-speed Tiagra and 9-speed Deore XT

I currently have a road bike with the following setup for the gears: 9-speed Tiagra front and rear derailleurs, Sora shifters, all from 2009: 30/39/52 Crankset 11-25 Cassette. I need some more low ...
3
votes
1answer
186 views

What tricks do you use to avoid damaging cables when adjusting the gears?

I was trying to adjust gears, and being my first time, I ended up damaging the cable. I mean that I "smashed" it, the threads became apart, and it was dangerous to deal with it. I replaced the cable, ...
4
votes
4answers
6k views

Why are there almost no bikes with a single chainring?

Bikes with two or three chainrings are the norm, and then there are singlespeeds, but except for kids' bikes, you see almost no stock bikes with a single chainring in front but a cassette and ...
5
votes
2answers
455 views

Switching to Lower Gears for Climbing

Right now, I've got a SRAM 11/26 cassette. I just moved to San Francisco, and some of the climbs out here (e.g., Mt. Tamalpais) are pretty brutal with over an hour of climbing. My cadence over some of ...
4
votes
2answers
653 views

Can you reverse the sprockets on a cassette to lengthen its lifespan?

I know my bike's rear cassette needs replacing, but before I do that, is it feasible to dismantle the 8 sprockets to reverse their spin? Can you increase the lifespan of a cassette by letting the cogs ...
11
votes
3answers
20k views

Help Me Understand My Bicycle's Gears

I've recently started commuting with a bicycle (Giant hybrid bicycle). I've been trying to learn a little about bicycling to make my commute easier and my time on the bicycle more enjoyable. Please ...
7
votes
1answer
917 views

I find that I'm always in my highest gear. What options to I have to re-distribute the ratios to a more useful range

I have three gears in the front and 8 in the back, but I always use the highest gear (I live in a flat place) I might drop down one or two gears occationally but this is only a small fraction of the ...
1
vote
1answer
2k views

Bicycle slipping gears on middle sprocket gears 4-7

I see lots of questions on gears slipping but not sure it's the same as what I have. Out of 21 gears I only have problems with 4 (middle sprocket (2) on left shifter gears (4-7) on right shifter). ...
0
votes
2answers
217 views

Unable to change from 14th to 7th

I've got a bike that I have had for about 8 weeks and it has already been back to be serviced twice. It's just returned from the second service and I've noticed that it is not shifting from 14th to ...
4
votes
3answers
13k views

Can I fit a cassette with a larger range with my Shimano Tiagra 10-speed ( GS-4600) derailleur?

I'm currently running a 2x10 shimano tiagra 10-speed drivetrain with a 50/34 compact crankset, a 12-30 rear cassette, and a Shimano Tiagra GS-4600 derailleur (that's medium cage aka road long cage) on ...
2
votes
1answer
261 views

Problems with gears after re-attaching front chainring

I had to remove the pedal crank arm together with the front chain set when fixing a bottom bracket problem, but now that I've re-attached it, gear changes in my front derailleur are completely off. ...
3
votes
2answers
619 views

Make a 3-gear bike go easy on uphill

I want to see how can I make this 3-gear bike go easier on uphill. It has an internal gear hub. I don't know much about bikes but I'm thinking if I can merely replace the hub for one with 14 gears ...
3
votes
1answer
272 views

Should I have a spare cassette or a spare wheel?

I have a road bike that I use for triathlons as well as club rides in the evenings and on weekends. I don't have the bike in front of me, but the range of the cassette is on the low side. I'm more ...
13
votes
6answers
6k views

What is the simplest way to lower the gearing on my touring bike?

I have a 2004 Jamis Aurora with a 52/42/30 triple and an 11-32 cassette in the back. 30x32 (25.3 gear inches) being the lowest gear is frustrating for the hilly terrain where I live (e.g., 7% grade ...
6
votes
3answers
3k views

Why does my bike stick in low gears?

When I change into a low gear (i.e. onto a bigger cog) on my back cog all is fine. However, when I later change up again the chain sticks on the larger cog. I commute about 10 miles a day and this has ...
4
votes
2answers
2k views

Is it practical to replace two sprockets on a cassette?

My bike has 53/39T chainrings and a cassette with 12,13,14,15,17,19,21,23,25 sprockets, but I like to ride up steep mountain roads. Is it possible (without great expense) to replace two sprockets to ...
3
votes
3answers
1k views

Efficient gear shifting

I've recent purchased a road bike bit of a classic with the downtube shifters, lugged steel frame etc etc. Before I mainly road my fixie, thou I do have another geared bike, but it left a bit to ...
1
vote
2answers
490 views

SRAM force rear shifts go in the wrong direction when on largest cassette

I got a new bike about 6 months ago with SRAM Force on it. It's my first time riding SRAM and I love it except for one thing: If I'm climbing and my RD is shifted all the way up ( to 28-tooth ) and ...
2
votes
2answers
690 views

Converting downstem shifters to barcons

What considerations should be made for converting a downstem shifting system to barcons? Both the current system and the system that I would like are friction shifters. The bike is a 1986 Peugeot ...
3
votes
1answer
799 views

What does double and triple gear shifters mean?

I am looking at these components and am wondering what does double and triple gear shifting mean? Shimano R221 Double Gear Shifters 8 Speed ...
2
votes
2answers
1k views

Maintenance/Upgrades for Gary Fisher Joshua MTB

Let me start from the beginning: About three years ago, I broke my leg after buying a Gary Fisher Joshua MTB, when I was just getting into road and cross-country riding. I've only started riding ...
1
vote
2answers
3k views

Will 10 speed cranks work with an 8 speed freewheel?

I'm looking at building a road-bike, and I've just purchased some wheels with campagnolo hubs, with an 8 speed freewheel on the back. Can I use Campagnolo Daytona / Veloce cranks on the front? I ...
2
votes
3answers
684 views

Townie gearing suddenly too easy

So the rear wheel (26x2) on my Electra Townie 7d broke its axle, and I ended up replacing it with a new 26x1.5 wheel, that being what the LBS had in stock. The bike seems a bit faster, which is nice, ...
1
vote
2answers
11k views

Difference between Shimano HG51 8-Speed Cassette and Shimano HG50 8-Speed Cassette

Can anyone tell me the difference between Shimano HG51 and HG50 8-Speed Cassettes? I can't find any information online about this so was hoping someone might be able to help me. I am looking to ...
2
votes
3answers
1k views

Replace S-RAM S7 gear hub with something better

I have an SRAM S7 gear on my bike, and I'm not content with it. I find it more or less impossible to get the adjustment right. Supposedly I just have to leave the shifter in position 7 and then ...
1
vote
1answer
260 views

Bicycle is Having a hard time Shifting — especially gears 13 and 14

21 speed commuter bike. Raleigh 2011 brand. After my gear shifter cable was broken, I took it into the shop to get it fixed. (4 days ago). Ever since, when shifting, it takes forever to actually ...
1
vote
2answers
1k views

Chain “vibrates” on higher gears

My freewheel that I have installed myself only 1.5 years ago has totally worn out by the moment and so I just had it replaced along with a chain at the workshop. I'm still concerned though about the ...