Handlebars are the part of the bike where the rider holds onto for grip and steering of the bike.

learn more… | top users | synonyms

5
votes
3answers
2k views

How do I make a road brake lever work alongside a mtb brake lever

If I manage to get a dropbar on my mtb and want to use both the MTB brake lever AND the road dropbar brake lever (like the Tiagra STI, but no gear shifting)... Is it possible? Can they use the same ...
3
votes
4answers
2k views

How do I make a MTB shifter fit on a Road dropbar?

I'm about to buy a MTB, since we don't have cyclocrosses here in my country. I'd like to have a road dropbar, but can't spend money on a road shifter like tiagra sti. I know the mtb handlebars are ...
4
votes
2answers
868 views

Looking for an alternative to the Speedlifter Twist / quickly rotate handlebars solution

I'm looking for an alternative to the Speedlifter Twist: http://www.speedlifter.com/twist.php?L=en The only function I'm interested in is the parking feature where I can turn my handlebar 90˚. I have ...
12
votes
4answers
1k views

Deterrents against partial (component) theft

Big question: Is there any way to increase the security of bolted on portions of a bicycle? Specifics: I cycle as my primary mode of transport (in East London) on a early 90s steel road bike with ...
3
votes
3answers
1k views

Handlebars for an upright seated position

After injuring my neck, shoulder and arm on a fall from my bike I need the type of handlebar that you see more commonly on a cruiser bike. ie that is one that gives you anupright sitting position. ...
3
votes
1answer
598 views

What advantages are there in mounting a butterfly bar with a drop instead of a rise?

I own a tourer with a butterfly bar mounted with the near flats rising. This puts the far flats rising towards the outside of my wrists. I have, however, seen butterfly bars mounted so that compared ...
5
votes
2answers
2k views

How long should I expect handlebar tape to last?

I assume that if handlebar tape is grimy, torn, or peeling, it should be replaced. How long should I expect handlebar tape to last before it needs to be replaced? How often do most cyclists replace ...
8
votes
2answers
2k views

Is it worth it to reverse the wrap direction of handlebar tape at the brake levers?

The Park Tool Handlebar Tape Installation guide suggests that the direction of wrapping can be either self tightening or prone to loosening. Its basic instructions make the tape self-tightening on the ...
8
votes
2answers
3k views

What are the positions on drop bars called?

I've heard the different places to put your hands on drop bars given different names, like "hoods" which I think is the flat part on top or maybe the brake levers, or "drops", referring to the lowest ...
7
votes
7answers
11k views

How do I put grips on mountain bike handlebars?

I just spent the last 10 minutes trying to put a new set of grips on to my mountain bike handlebars.. The old ones came off fairly agreeably and I've got the new ones 80-90% of the way on, however, ...
2
votes
1answer
3k views

Measuring stem clamp / handlebar diameter

I have a new-ish Bianchi Cortina hybrid that I'm trying to find suitable drop bars for, but I can't figure out the proper size to get. It seems like the bars mostly come in 25.4mm, 26mm and 31.8mm. ...
6
votes
3answers
33k views

How do I correctly set the angle of my drop bars

Are there any tricks to setting the correct angle for the drop bars on my road bike, when adjusting my handlebars in the stem? Is it just a matter of personal preference or is there a general ...
8
votes
4answers
598 views

After an accident, what next?

Cycling home in the dark a car pulled across me to enter a super market car park. Apparently the car that let him cross didn't remove their full beam so he didn't see me in the cycle lane and I hit ...
7
votes
5answers
926 views

Are drop bars suitable for winter commuting?

I've been told by somewhat knowledgable people that drop bars aren't suitable for winter cycling in snow and ice. Is there any validity to this? If so, why, and which style of handle bar would be ...
5
votes
2answers
2k views

Can I put drop handlebars on my commuter bike?

I want to put drop handlebars on my commuter bike which has a straight bar. The guy at the bike store said that drop handlebars are too thick to fit my standard brake/shift system. I don't want to ...
2
votes
3answers
811 views

Bar end brakes and handlebar swapping

I have one road bike that I use mostly for commuting, sometimes for fast alone rides and infrequently for group rides. I was thinking that since most of my riding is alone I should put my tri bars ...
3
votes
3answers
673 views

Drop Handlebars on an Old Bike

I'm shopping around for a vintage bike (maybe an old Raleigh or Schwinn), but I'm looking for two things: Fenders and a Chain Guard Drop Handlebars I'm starting to think that drop handlebars are ...
9
votes
2answers
2k views

My brake lever is coming loose from my handle bars; how can I tighten it?

I have a road bike with drop bars, and the left brake lever is slightly loose - it can rotate a few degrees around the handle bar from side to side. How can I tighten it? Is it possible to do so ...
8
votes
7answers
3k views

Can replacing my handlebar tape help reduce finger numbness?

Despite changing hand positions often and switching to more "cushiony" gel gloves, I'm still experiencing intermittent numbness when I ride (sometimes I get tingling and sometimes not). Are certain ...
2
votes
2answers
1k views

How can I move the handlebars on a mountain bike close to the rider without affecting handling and control?

I recently finished building up a mountain bike, with the help of a friend. My initial rides - a few miles, nothing too extensive yet - revealed that I need to move the handlebars a bit up and back ...
4
votes
6answers
4k views

Securing sliding bar grips without hair spray?

I have some Bell anatomic handlebar grips that tend to slide (rotate) on the bar. I've read that using hair spray is useful, but tends to be rather permanent. I'd like to make the grip tackier but not ...
29
votes
3answers
32k views

How to use drop handlebars properly?

This might seem like a really basic question, but there's no harm in asking. I've never had a bicycle with drop handlebars. I've always had sort of standard horizontal bars with only one hand ...
1
vote
3answers
2k views

What kind of handlebar should go on a fixie to sell it?

I've seen fixies with mtb handlebars, sawed-off mtb handlebars, drop bars, and bullhorns. The fixie I built has drop bars, but I'm wondering if I should change that if I want to sell it.
2
votes
5answers
4k views

How is bicycle fit affected by switching from a riser bar to a flat bar?

I have a 2009 Kona Dew that comes with handlebars that have a rise in them. I've noticed that I feel pretty upright while biking so I'm looking to get into a more aerodynamic position. Looking at ...
2
votes
3answers
11k views

Better solution for uncomfortably low bars: a stem riser, or taller stem?

I've got my (threaded) stem at the maximum height, but I'd be more comfortable if the bars were higher relative to the seat. It would be uncomfortable to lower the seat any further. I was intrigued ...
3
votes
2answers
424 views

What are early signs of failure in forks/stem/handlebars?

I ride an SE Lager. In the past year, the following components have worn out or broken Front chainring Rear cog Rear freewheel Chain Seat (one of the bars snapped off) Many, many spokes Wheels ...
3
votes
3answers
1k views

Which type of handle bars are best for off-road & road use?

There are quite a lot of types of bars. Some best bit for aerodynamics, some best fit for control, some offer significant amount of positions. I am looking to change my handlebars to the best fit ...
2
votes
2answers
1k views

Bent Handlebars

My girlfriend recently got a new road bike. After getting it home we realized that that handlebars were quite badly bent. Here is a picture. Here is my question. Can I try and bend the bars back ...
3
votes
2answers
655 views

New stem, bars & shifters on old Bridgestone 700

I recently bought a 1980's Bridgestone 700. I have trouble feeling confident on this bike between the narrow drop bars and the downtube shifter. This is my all-steel commuter and I'd like to put ...
6
votes
4answers
3k views

Drop handlebars with drops that don't fit. Replace or adjust?

I bought a Surly Long Haul Trucker a couple years ago, and it has the stock handlebars. My hands don't really fit in the drops, and I sometimes would like a lower handlebar position where I can still ...
1
vote
1answer
201 views

Identify the components of this bike

I'm trying to identify, or find similar, parts on the bike in this video, specifically the front (three spoke) wheel, frame, and handle bars.
5
votes
1answer
2k views

Brake lever placement on a road bike

I am just going to re-wrap my road bike's handlebar tape tomorrow. Before I do that I was wondering what the proper place is to put the brake levers. I know they should be pointed vertically, ...
3
votes
3answers
3k views

Can I put bullhorn bars on a bike with hydraulic disc brakes

The most comfortable bike I've ever owned was a road bike with bullhorn (aka pursuit) bars. I actually had a pair of STI levers on it, mounted upside down (with the handles pointing forward). They ...
2
votes
3answers
2k views

What types of mountain bike handle bar grips are available and how to they affect comfort and handling?

This question has been floating around in my head for a while, mainly because I don't know anything about grips (edit to resolve confusion:covers for the part of the handlebar you hold on to). Are ...
10
votes
1answer
486 views

How do I wrap a road bike handlebar?

What is the best way to wrap a handlebar? Specifically: Should I start near the stem or at the bar ends? wrap clockwise or counter-clockwise? How to wrap (e.g. how many times) around where the ...
19
votes
5answers
7k views

Pros/Cons of Bar-Ends?

I've always heard "never use barends" and they're banned equipment for some of the local clubs/group rides. A number of people on-line swear by them though. What's up with that!? :-) Why would I ...
4
votes
1answer
2k views

How have you setup your tri-bars?

I'm getting some tri-bars for Christmas and I've been told by the bike shop how to set them up on the bike, but I'd like to get some tips from lots of different people. Up-close photos would be great. ...
5
votes
1answer
722 views

Android/EVO bike mount recommendations

Does anyone have experience mounting an EVO phone on the handlebars of a road bike?
16
votes
3answers
12k views

What height should drop handlebars be - relative to my saddle?

I've done most of my cycling with flat handle bars on a mountain bike. I'd like to start commuting to work though and am considering getting a road bike with drop handle bars. The thing is though, I ...
22
votes
13answers
41k views

Different kinds of Handlebars

What different kinds of bike handle bars are there? All kinds welcome, the common and the nameless. If possible include the pros and cons of the bar One bar per post
9
votes
3answers
16k views

Upgrading straight handlebars to drop handlebars

I have a two-and-a-half year old Giant FCR 3 (with a road-bike-like frame and thin tires; it's somewhere in the loosely-defined "hybrid" range) that I use to commute to work, twenty-five miles ...
4
votes
1answer
177 views

Glued grip has rotated, won't rotate back

The leather-like grips on my cruiser have rotated a bit over the last year and a half; the faux "stitching" on one of them is now at a location that feels weird when I'm holding it. I can't rotate the ...