Handlebars are the part of the bike where the rider holds onto for grip and steering of the bike.

learn more… | top users | synonyms

2
votes
3answers
1k views

Replacing mountain bike bars & stem with drop bars

I have a mid-1990s Specialized Rockhopper. I've trashed the flat bars that were on it previously and I want to install drop bars, but to make that comfortable for me I'll want a shorter and higher ...
2
votes
4answers
926 views

Does anyone sell a direct-drive recumbent with no handlebars?

This document well describes the benefits of a direct-drive recumbent. Is there any carbon-frame recumbent, commercially available, that implements all its recommendations. And what are the pros and ...
2
votes
3answers
3k views

What kind of handlebar should go on a fixie to sell it?

I've seen fixies with mtb handlebars, sawed-off mtb handlebars, drop bars, and bullhorns. The fixie I built has drop bars, but I'm wondering if I should change that if I want to sell it.
2
votes
2answers
150 views

Cheap carbon-fiber handlebar from Hong Kong. Will it break?

I bought a flat carbon handlebar from Hong Kong, unbranded, at ebay. I've paid about AUD25... I wonder, will it break? How can I tell whether the built quality is OK? It is for a road bike that I ...
2
votes
3answers
385 views

Vintage Peugeot tends towards the left when riding

I've bought a second hand old peugeot, I really like the bike, but first of all... I'm having a balance problem with it, tends to be oriented towards to the left when riding it. Might be related with ...
2
votes
1answer
1k views

Straight or Drop handlebars?

Can someone explain to me the pros/cons of drop or straight? I've never used drops before and have never owned a good road bike (just cheap mountain bikes) - I am buying a decent single speed soon and ...
2
votes
3answers
6k views

Dahon handle post hinge loosens too quickly

I noticed that the handle post hinge on my Dahon Speed D7 now requires attention much more often than it used before. Unlike main frame hinge which remains tight for long after adjustment, this one ...
2
votes
1answer
5k views

Measuring stem clamp / handlebar diameter

I have a new-ish Bianchi Cortina hybrid that I'm trying to find suitable drop bars for, but I can't figure out the proper size to get. It seems like the bars mostly come in 25.4mm, 26mm and 31.8mm. ...
2
votes
2answers
3k views

How can I move the handlebars on a mountain bike close to the rider without affecting handling and control?

I recently finished building up a mountain bike, with the help of a friend. My initial rides - a few miles, nothing too extensive yet - revealed that I need to move the handlebars a bit up and back ...
2
votes
3answers
75 views

Preventing ergonomic handlebar internal rubber cylinders to stick

I have a bike with ergononomic handles (Fuxon brand). Those are kept in position (as in prevented to rotate) with a mechanism which fits inside the handlebar. This mechanism works by compressing two ...
2
votes
1answer
2k views

Loose Handlebars

I recently got into a small bike accident and the handlebars became loose. It seems to not be in sync with the front bike tire. I tried to tighten the headset and locknut, nothing seems to work. I can ...
2
votes
2answers
60 views

How to correctly mount double-lock grips?

I have a pair of PRO double lock-on grips (id est two lock rings per grip). In a recent crash, following an immensely helpful tip from a fellow rider, I clung to one end of the handlebars, turning the ...
2
votes
2answers
368 views

Shifters/brakes won't fit on bullhorn bars

I have a KALLOY UNO HB-005 580 mm handlebar and a shifter with brake combination, Shimano Alivio ST-M310. I have a Sora derailleur and crank set. I got as a gift a bullhorn Origin8 Bully Bullhorn 6061-...
2
votes
1answer
444 views

Can I use 25.4mm bullhorn brakes on a 26mm handlebar?

I've got a 26mm bullhorn handlebar but it seems like many stores sell bullhorn brakes that are for 25.4mm bullhorns. Will this 0.6mm make much of a difference? Would it be okay to use the 25.4mm ...
2
votes
1answer
173 views

How do I remove old hockey tape from drop bars

I used hockey tape on the drop bars for my bike and I need to remove it to replace the brake levers. Over time, the tape has become melted/fused together, and I used lots of layers for extra ...
2
votes
1answer
344 views

Front bag/basket configuration that works with butterfly/trekking bars?

My bike has these butterfly/trekking bars. My possibly-mistaken sense is that the hooks most front bags and baskets rely on are designed for flat bars, such that they will be too far apart to hang ...
2
votes
2answers
81 views

French handlebar fit

I have an Atax stem ('85 Peugeot). Original steel handlebars are 25 mm. Is it prudent to spread the stem to accommodate Nitto 25.4 randonneur bars?
2
votes
2answers
604 views

Can I put standard drop brakes on a MASI drop handlebar?

I've got a set of handlebars from a MASI Uno. I'd like to know if I can put standard drop bar brakes, similar to these (ignore the interrupter brakes and bar end shifter for now). The MASI bars ...
2
votes
1answer
349 views

Can´t remove BMX stem top cap bolt (won´t loosen)

I was trying to remove the handlebar and stem of my bike in order to be replace them. The bike has got a BMX stem and the top cap bolt is spinning freely in both clock and counterclockwise. Any idea ...
2
votes
1answer
175 views

Replacing a shifter

One of my plastic shifters broke and I am looking for a replacement on the internet. How do I know whether a replacement will fit my handlebar. Are all handlebars the same size?
1
vote
2answers
128 views

My Bike Like To Try and Turn Left

So when I ride my bike it likes to give a little traction at times like the front wheel wants to turn left. The rim looks straight to me and i double checked it. Is this a problem with the wheel or ...
1
vote
2answers
138 views

Angled in drop bars like Salsa Woodchippers with slightly less angle in?

I like drop compact drop bars but I think I'd like them better if they were angled in like Salsa Woodchipper bars. I adjust my brake levers to angle in on regular drop bars and compact drops because ...
1
vote
3answers
183 views

Front fork pulling to center / “indexed steering”

So I took my bike in to the repair shop, to have the rear wheel replaced, but after the repair I noticed immediately the steering feeling a bit strange. I've since worked out why. The problem is that ...
1
vote
2answers
874 views

Extend drop bars with additional positions

I have my touring bike set up with drop bars, very similar to this: However, after riding all day for a few days, I tend to miss additional position(s) to avoid minor annoyances such as "numb ...
1
vote
1answer
51 views

Front derailleur takes 6 clicks to shift gears, instead of 3 [duplicate]

I've just stripped all cables and chain from a badly kept bicycle and replaced them. I've correctly adjusted the rear derailleur and it works great. However, front derailleur which only has 3 gears ...
1
vote
4answers
171 views

Commuting on flat terrain/handle bar

For my new job I'll have to commute about 10 - 20km (6 - 12mi) each day (one trip) in flat terrain. Right now, I'm commuting 6km/4mi each day, with an elevation gain of 160m uphill to work. I'm ...
1
vote
1answer
127 views

Reason for handlebar diameter

Why are handlebars the diameter they are (22.2 or 23.8 in grip area)? In general, the best diameter for grip strength is where the hand around the grip has about 1mm from the tip of the middle finger ...
1
vote
2answers
72 views

some resources for a bianchi [closed]

I've got a 1981 (i'm told) bianchi 10-speed road bike. I am having trouble left and right. is there anything as basic as a site wherein i could provide the serial number and get some general ...
1
vote
1answer
159 views

What parts do I need to change to convert from flat handle bar to drop bar? [duplicate]

I am thinking about getting a drop bar for my Merida Speeder 200 (2015). But I am told that I need to change some other parts as well. My bike has V type brakes, 3 speed front derailleur and a 9 ...
1
vote
2answers
246 views

triathlon handlebars for ultegra di2

I recently bought a Canyon AL 9.0 Di2 bike and would like to mount a triathlon handlebars on it. My ultimate desire would be able to have the gear switchers both on the triathlon and the bike's ...
1
vote
4answers
1k views

Getting used to narrower handlebars

Just switched from flat to drop bars which are narrower that the original flats. Also, to compensate the "depth" of the riding position, I took a shorter stem (60mm instead of 105mm). Because of ...
1
vote
1answer
65 views

Uncomfortable rise and backsweep on wide mountain bike handlebars

I've got a set of wide carbon bars on my mountain bike. I get painful wrists after riding because of the shape of the bars. They are pretty much flat with a slight backsweep. How do I know which bars ...
1
vote
1answer
86 views

Will loose handlebars result in slower riding?

I went for a ride this morning and my handlebars were loose. I now realize that it is unsafe to ride like that but my average speed was dramatically lower. Do you think it is because of my loose ...
1
vote
1answer
401 views

Are cross brake levers with compact drop bar redundant?

I currently have traditional drop bars and cross (interrupter) brake levers. I like the interrupters and use them a lot. But I'm going to get a compact drop bar (FSA Omega Compact bar on order), and ...
1
vote
3answers
490 views

drum brakes and drop handle bars

I have sturmey archer xfdd and xrd5. Which brake lever are suitable for these and drop handle bars. The cable is road type with a barrel rather than a nipple.
1
vote
1answer
140 views

Bullhorn handlebars or extension grips?

I use my hybrid bike for commuting and casual trips, and comfort is important to me. I am therefore looking to upgrade my handlebar to the bullhorn type, as this greatly increases comfort and reduces ...
1
vote
2answers
77 views

Steering Retrospec Speck 20"

I just received the Retrospec Speck 20". I'm a 69 y.o. 5'8, 160 lb woman and thought this simple bike would be easy to ride (single gear with rear peddle backward brake). I could not ride it because ...
1
vote
3answers
453 views

fixie brake lever

I've got a bit of a dilemma with regards to brakes on my fixed wheel bike. Currently I've got both brakes on, as standard road levers on the hoods of the drops, but now I'm running fixed instead of ...
1
vote
1answer
261 views

What is the handlebar size for an old road bike?

I have a 1980 Fuji America 18 speed road bike that needs to have the handlebar replaced. How do I determine the handlebar size? It appears that 26mm is the common size for older road bikes - but I ...
1
vote
1answer
224 views

Identify the components of this bike

I'm trying to identify, or find similar, parts on the bike in this video, specifically the front (three spoke) wheel, frame, and handle bars.
1
vote
1answer
569 views

Why are 3 inches mountain bike handlebar hard to find? [closed]

I'm looking for a new handlebar, ideally 3 inches. But looking in some of the online shops it seems quite hard to get 31.8mm bar clamp diameter handlebar with 3" rise. Do you know if there is any ...
0
votes
2answers
36 views

Putting new grips on handlebars [duplicate]

I have new flat bars and grips. What's the easiest way to slide the grips onto the bars?
0
votes
4answers
558 views

Bike too big for me

I bought a bike online based on a recommendation that a 56cm frame would be ok for me (I am 5ft 10, with 30" inside leg). However I think it is slightly too big. I have to lean forward a lot and my ...
0
votes
1answer
47 views

Stem diameter question

Changing to an adjustable Ritchey stem on my Trek 7.3. My bars are 25.4 and the stem I'm looking at is stated to be for 25.8-26. With this being half a millimetre bigger, will it still fit ok? Many ...
0
votes
1answer
62 views

Does anyone know who made the part that attaches the shifter to the bar?

http://imgur.com/cvWOSbS Looking to set something up like that with bullhorns, cant find the part to attach shifter to bar.
0
votes
1answer
138 views

Handlebar size options

I was given few options to choose the handlebar size for my future road bike. The frame size is 60cm but for the handlebar I have these options: 40x90,40x100,42x100,42x110,44x110,44x120 I measured ...
0
votes
1answer
1k views

How to avoid or reduce back-pain by adjusting the handlebar and seat of 19.5" MTB?

I'm 6' 3" long, having 45 inches of waist-Toe length. I bought Trek 3500, 19.5" sized frame bicycle two months ago. I've been experimenting with the handlebar and seat positions(Forward n Backward) to ...
0
votes
1answer
33 views

Upgrade options for hybrid Scott Sub10 bars?

I currently have a flat bar on a hybrid bike (the Scott Sub10). It's a great bike, and I had the saddle height and angle adjusted at the store, so I've got the right leg angle on the down stroke and ...
0
votes
1answer
63 views

How do I install drop bars on my trek earl? [duplicate]

I'm new to doing bike stuff, but I want to install drop bars on my single speed 2012 Trek Earl, how would I go about doing so? What things would I need to take into account before getting started?
0
votes
0answers
34 views

How do I lower Aero Bars without lowering hoods

1) Clip-on Aero Bars are too high. 2) Hoods must not be lower than they already are, higher would not hurt 3) I keep the drops, although height not too important My stem is already slammed, I can ...